Professional Documents
Culture Documents
DXXXX-1695-2690/1695-2690/1695-2200/2490-2690-65/65/65/65-
17.5i/17.5i/17i/17.5i-M/M/M/M-R
EasyRET 4H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
2 x (1695 - 2690) (Ly1/Ry3) 1695 - 2200 (b1) 2490 - 2690
Frequency range (MHz)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 (Cy2)
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12, continuously adjustable, each band separately
at mid Tilt 16.9 17.3 17.7 17.8 16.6 17.0 17.5
Gain (dBi)
over all Tilts 16.8 ±0.5 17.2 ±0.5 17.5 ±0.5 17.6 ±0.5 16.5 ±0.5 16.9 ±0.5 17.3 ±0.5
Side lobe suppression for first
> 17 > 18 > 18 > 16 > 17 > 16 > 17
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 66 ±5 65 ±4 63 ±4 60 ±5 65 ±5 62 ±5 61 ±5
Vertical 3dB beam width (°) 7.1 ±0.7 6.4 ±0.7 5.7 ±0.6 5.2 ±0.5 7.0 ±0.7 6.4 ±0.6 5.1 ±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio , ±30°(dB) ≥ 24 ≥ 25 ≥ 27 ≥ 26 ≥ 26 ≥ 27 ≥ 28
Cross polar ratio (dB) 0° > 20 > 20 > 20 > 18 > 20 > 20 > 18
Max. power per input (W) 250 (at 50℃ ambient temperature)
Total power (W) 700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm) 1365 x 376 x 99
Packing dimensions (H x W x D) (mm) 1680 x 440 x 170
Antenna weight (kg) 18.9
Clamps weight (kg) 3.0 (2 units)
Antenna packing weight (kg) 28.6 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
1262
1365
Accessories
Item Model Description Weight Units per antenna
1
AQU4518R53v06
DXXXX-1695-2690/1695-2690/1695-2200/2490-2690-65/65/65/65-
17.5i/17.5i/17i/17.5i-M/M/M/M-R
EasyRET 4H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWMxxx……Ly1
HWMxxx……..b1
Ly1 b1 Cy2 Ry3
HWMxxx……Cy2
HWMxxx……Ry3
y - Yellow b - Blue
C - Center array L - Left array R - Right array
Pattern sample for reference
1695 - 2690 MHz 1695 - 2200 MHz 2490 - 2690 MHz 1695 - 2690 MHz
(Ly1) (b1) (Cy2) (Ry3)
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 2 Issue: 2018-11-24