Professional Documents
Culture Documents
DESOLDERING PRODUCTS
SYSTEM
DESOLDERING PRODUCTS
SOLDERING IRONS
SERVICE STATION
AUTOMATIC DESOLDERING STATION
PORTABLE DESOLDERING GUNS
DESOLDERING WICKS
DESOLDERING SUCKERS
SOLDERING TESTER
SOLDER FEEDER TIP THERMOMETER
SERVICE STATION
SVS-800AS
REWORK UNIT
AUTOMATIC
INDEPENDENT PUMPS
Desoldering and reworking operate simultaneously
400% MORE SUCTION CAPACITY
With open-valve mechanism
CERAMIC HEATER WITH INTERNAL SENSOR
A wide range for terminals, connectors and flat ICs (soldering & desoldering)
DESOLDERING
SERVICE STATION
SOLDERING WORK
58
SYSTEM
SOLDERING
PRODUCT SPECIFICATIONS / FUNCTIONS
SOLDERING IRONS
TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES SPECIFICATIONS
MODEL SVS-800AS SVS-580AS
Soldering Unit Desoldering Unit Voltage 220-240 V AC 50/ 60 Hz 110 V,120 V, 220-240 V AC 50/ 60 Hz
(℃)500 (℃)
500
670-760 W 200 W (110 V,120 V)
Nozzle temp.
400 400 Power Consumption
Work (Set at 450°C) – 270-300 W (220-240 V)
Tip temp.
300
Work (Set at 400°C)
300 Power Cord Length 1.5 m Inlet type 1.5 m
200 200 Temp. Desoldering Unit 250−450˚C 250−450˚C
100 100 Setting Soldering Unit 200−480˚C 200−480˚C
Range Rework 150-550℃
0 0
1 2 3 4 5 2 4 6 8 10
(min.) (min.)
Insulation Resistance Over 10 MΩ (500 V DC) Over 100 MΩ (500 V DC)
Vaccum Degree Chart Vacuum Pump System Diaphragm system Diaphragm system
Solder melted consecutively on 5 mm-dia600
land. Approx. 2 s / land.
(mmHg)
TIP THERMOMETER
SOLDERING TESTER
200
500AS). SVS-500AS
DESOLDERING UNIT
SOLDER FEEDER
AUTOMATIC
Input Voltage 220-240 V AC 110 V,120 V, 220-240 V AC
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 (sec.) Power Consumption 85 W 85 W
Heater Ceramaic Heater Ceramaic Heater
Cord Length 1.2 m 1.2 m
Dimensions 220 x 155 mm 220 x 155 mm
SUCTION CAPACITY COMPARISON Weight
Standard Nozzle
250 g (w/o cord, hose )
TP-100N-S5
250 g (w/o cord, hose )
TP-100N-S5
The arrow indicates solder residue.
SOLDER POTS
SOLDERING UNIT
Input Voltage 220-240 V AC 110 V,120 V, 220-240 V AC
Power Consumption 70 W 70 W
Ground Resistance Less than 2 Ω Less than 2 Ω
Leak Voltage Under 2 mV Under 2mV
/ SMT PRODUCTS
SURFACE-MOUNT
Heater Ceramic heater Ceramic heater
Cord Length 1.2 m 1.2 m
The arrow indicates solder residue. Length 190 mm (with PX-2RT-B) 190 mm (with PX-2RT-B )
SVS-500AS SVS-800AS/ 580AS Weight 70 g (with PX-2RT-B ) 70 g (with PX-2RT-B )
Standard Tip PX-2RT-B PX-2RT-B
REWORK UNIT
PRODUCTS
DESOLDERING
OPEN-VALVE MECHANISM Input Voltage 220-240 V AC –
Two-stage trigger switch (PAT.P) Power Consumption 370-430 W –
Heater Nichrome Heater –
Hose length between
1m –
Handpiece and Control Unit
Step 1
Pulling the trigger (lightly) activates the first Length 220 mm (w/o cord) –
ACCESSORIES
SOLDERING
stage switch. The pump starts, and the air Weight 180 g (w/o nozzle, cord) –
pressure decreases in the vacuum chamber. Trigger
This machine does not have vacuum pickup function.
Step 2
Next, pulling the trigger fully activates the First stage
second stage. The open-valve will open, and switch For replacement tips, nozzles, and optional parts, refer to p.54 & p. 63
the solder is sucked up at once by the
MATERIALS
SOLDERING WORK
Solder
Pump ST-76
Negative soldering iron stand
pressure (included)
Vacuum
chamber
HAND TOOLS
59