This document discusses setting up histograms to record lambda error readings from an engine to identify where errors are located and their magnitude. It describes selecting built-in tables to automatically set the column and row headings for histograms of MAF airflow vs output frequency and primary VE vs RPM vs MAP. It also describes applying a filter to the histograms to limit recorded data to steady-state driving by only including readings when wheel acceleration is below 10 and throttle position is above 0.4%.
This document discusses setting up histograms to record lambda error readings from an engine to identify where errors are located and their magnitude. It describes selecting built-in tables to automatically set the column and row headings for histograms of MAF airflow vs output frequency and primary VE vs RPM vs MAP. It also describes applying a filter to the histograms to limit recorded data to steady-state driving by only including readings when wheel acceleration is below 10 and throttle position is above 0.4%.
This document discusses setting up histograms to record lambda error readings from an engine to identify where errors are located and their magnitude. It describes selecting built-in tables to automatically set the column and row headings for histograms of MAF airflow vs output frequency and primary VE vs RPM vs MAP. It also describes applying a filter to the histograms to limit recorded data to steady-state driving by only including readings when wheel acceleration is below 10 and throttle position is above 0.4%.
HISTOGRAMS – MAF first: must select Lambda Error (computed from EIO input #1 readings) to be recorded – tells you
where the errors are located and how
much they are. Selecting the built in table for MAF airflow verses Output Frequency to automatically set up the column and row headings of this histogram: HISTOGRAM – Now set up the histogram for recording Lambda Error in VE table format: Selecting the built in table Primary VE verses RPM vs MAP to automatically set up the column and row headings of this histogram (VE format): HISTOGRAM FILTER: limits data recorded to that similar to steady-state while driving car around (lambda error is only calculated and
Recorded in the histogram when wheel acceleration/deceleration is less than 10 and when the throttle position(TPS) is greater than zero %
(use 0.4% to cover error that is inherent in TPS position sensors)