Professional Documents
Culture Documents
0
8-Nov-19
V.A.
Available information
Used to set the measurement
Used for measurement
Used to set the POD
Used to calibrate parameters
System
Not used
Memory location Not Used
Protocol Version 3
Modbus address
Update Protocol (as a Memory
hexadecimal)
1 #ADDIN?
2
2
2
2
2
2 #ADDIN?
3
3
3
3
3
3 #ADDIN?
4
4
4
4
4
4
4 #ADDIN?
5 #ADDIN?
22
22 #ADDIN?
75 #ADDIN?
76 #ADDIN?
77 #ADDIN?
78 #ADDIN?
79 #ADDIN?
80
80 #ADDIN? RAM
81 #ADDIN? RAM
82 #ADDIN? RAM
83
83
83
83
83
83
83
83
83
83 #ADDIN? RAM
85 #ADDIN? RAM
87 #ADDIN? RAM
89 #ADDIN? RAM
91 #ADDIN? RAM
93 #ADDIN? RAM
95 #ADDIN? RAM
97 #ADDIN? RAM
99
99 #ADDIN? RAM
100
100
100
100
100 #ADDIN? RAM
101 #ADDIN? RAM
102 #ADDIN? RAM
103 #ADDIN? RAM
104 #ADDIN? RAM
105
105 #ADDIN? RAM
107
107
107
107
107
107 #ADDIN? RAM
109 #ADDIN? RAM
9/23/2019 v3+ 111 #ADDIN? RAM
9/23/2019 v3+ 112 #ADDIN? RAM
9/23/2019 v3+ 113 #ADDIN? RAM
9/23/2019 v3+ 114 #ADDIN? RAM
9/23/2019 v3+ 115 #ADDIN? RAM
9/23/2019 v3+ 116 #ADDIN? RAM
9/23/2019 v3+ 117 #ADDIN? RAM
9/23/2019 v3+ 118 #ADDIN? RAM
9/23/2019 v3+ 119 #ADDIN? RAM
9/23/2019 v3+ 120 #ADDIN? RAM
9/23/2019 v3+ 121 #ADDIN? RAM
9/23/2019 v3+ 122 #ADDIN? RAM
9/23/2019 v3+ 123 #ADDIN? RAM
9/23/2019 v3+ 124 #ADDIN? RAM
9/23/2019 v3+ 125 #ADDIN? RAM
9/23/2019 v3+ 126 #ADDIN? RAM
9/23/2019 v3+ 127 #ADDIN? RAM
9/23/2019 v3+ 129 #ADDIN? RAM
9/23/2019 v3+ 131 #ADDIN? RAM
9/23/2019 v3+ 133 #ADDIN? RAM
9/23/2019 v3+ 135 #ADDIN? RAM
9/23/2019 v3+ 137 #ADDIN? RAM
9/23/2019 v3+ 139 #ADDIN? RAM
9/23/2019 v3+ 141 #ADDIN? RAM
9/23/2019 v3+ 143 #ADDIN? RAM
9/23/2019 v3+ 145 #ADDIN? RAM
9/23/2019 v3+ 147 #ADDIN? RAM
9/23/2019 v3+ 149 #ADDIN? RAM
9/23/2019 v3+ 151 #ADDIN? RAM
9/23/2019 v3+ 153 #ADDIN? RAM
9/23/2019 v3+ 155 #ADDIN? RAM
9/23/2019 v3+ 157 #ADDIN? RAM
159 #ADDIN? RAM
160 #ADDIN? Flash / RAM
161 #ADDIN? Flash / RAM
162 #ADDIN? Flash / RAM
163 #ADDIN? Flash
164 #ADDIN? Flash
Compensates 2 returned by Master Salinity, in ppt, Default value (when Pod switched on: 0 ppt).
corrected measurement 1: NU
corrected measurement 2: NU
gross measurement: NU
Measurement impossible with INFO 3 NU Tablet missing Tablet missing Tablet missing
Parameter 4
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
Comments:
Temperature measurement
Unit: °C
corrected measurement 1:
corrected measurement 2:
gross measurement:
Information:
Offset Temp Coefficient Temperature offset
Temp Slope Coefficient Temperature slope
Coef 1 Range offset 1
Coef 2 Range slope 1
Coef 3 Range offset 2
Coef 4 Range slope 2
Coef 5 Range offset 3
Coef 6 Range slope 3
Coef 7 Range offset 4
Coef 8 Range slope 4
Coef 9 TU offset
Coef 10 TU slope
Coef 11 NU
Coef 12 NU
Coef 13 NU
Coef 14 NU
Coef 15 NU
Coef 16 NU
Master returns:
standard 11 NU
standard 12 NU
standard 13 NU
standard 14 NU
standard 15 NU
standard 16 NU
Nephelo/TU / Temperature PONSEL "
40
SN-PNEPA-xxxx
10
32.32 (0.0)
ltaneously with TU measurement. By default, Nephelo measurement is enabled.
used in °C
NU
NU
NU
NO NU YES
NU
NU
NU
In use NU In use
NU NU NU
NU NU NU
libration standards :
°C
Temperature value recommended by Ponsel: near 0°C
°C
Temperature value recommended by Ponsel: near 25°C
in mg/L
Parameter 3 ??? To be verified
in mg/L
Parameter 3 ??? To be verified
Information available
Used for measurement parameter setting
Used for measurement:
Used for POD parameter setting:
Used for parameter calibration
System, used exclusively by Ponsel
NU Not used
Parameter 4
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
Comments:
Comments:
Unit: °C in pH units
corrected measurement 1: NU
corrected measurement 2: NU
gross measurement: NU
Information: Unit:
Offset
standard 3 0x01
0x02
0x03
Redox pH NU
in mV in mV unit NU
historical historical NU
NU NU NU
NU
NU
NU
In use NU NU
NO NU NU
returns measurement NU NU
NU
NU
NU
In use NU NU
NU NU NU
NU NU NU
NU NU NU
NU NU NU
Temperature
Temperature
Parameter 1
Parameter 1
Parameter 2
Parameter 2
Parameter 1
Unit : °C NU
Corrected measurement 1 : NU
Corrected measurement 2 : NU
Gross measurement : NU
Standard 1 NU
Standard 2 NU
Offset
0x01
Standard 3 0x02
0x03
Standard 5 NU
Standard 6 NU
Standard 7 NU
Standard 8 NU
Standard 9 NU
Standard 10 NU
Standard 11 NU
Standard 12 NU
Standard 13 NU
Standard 14 NU
Standard 15 NU
Standard 16 NU
Redox NU NU
in mV NU NU
historical NU NU
NU NU NU
NU
NU
NU
In use NU NU
NO NU NU
returns measurement NU NU
NU
NU
NU
NU
In use NU NU
NU NU NU
NU NU NU
NU NU NU
NU NU NU
Temperature
Temperature
Parameter 2
Parameter 2
Temperature measurement
Unit: °C
corrected measurement 1: N
corrected measurement 2: N
gross measurement: N
Note: Salt content and TDS are not calibrated: these parameters are derived from the
Information:
Master returns:
standard 9 NU
standard 10 NU
standard 11 NU
standard 12 NU
standard 13 NU
standard 14 NU
standard 15 NU
standard 16 NU
4E /Salinite/Temp PONSEL "
30
SN-PC4EA-xxxx
10
32.32 (0.0)
used in °C
NU
NU
NU
Used for
NU NU
parameters 1, 2 and 3
NO NU NU
returns measurement NU NU
NU
NU
NU
In use NU NU
NU NU NU
NU NU NU
NU NU NU
TDS are not calibrated: these parameters are derived from the conductivity measurement.
Unit: Coefficient used for parameter: Comments:
°C Temperature
% Temperature
µS/cm Parameters 1, 2 and 3.
% Parameters 1, 2 and 3.
µS/cm Parameters 1, 2 and 3.
% Parameters 1, 2 and 3.
µS/cm Parameters 1, 2 and 3.
% Parameters 1, 2 and 3.
µS/cm Parameters 1, 2 and 3.
% Parameters 1, 2 and 3.
libration standards :
°C
Temperature value recommended by Ponsel: near 0°C
°C
Temperature value recommended by Ponsel: near 25°C
in µS/cm
Parameters 1, 2 and 3. Ponsel recommends that the sensor be placed in the air.
in µS/cm
Parameters 1, 2 and 3. example of value (recommended by Ponsel): 84 µS/cm
in µS/cm
Parameters 1, 2 and 3. Ponsel recommends that the sensor be exposed to air.
in µS/cm
Parameters 1, 2 and 3. example of value (recommended by Ponsel): 1413 µS/cm
in µS/cm
Parameters 1, 2 and 3. Ponsel recommends that the sensor be exposed to air.
in µS/cm
Parameters 1, 2 and 3. example of value (recommended by Ponsel): 12880 µS/cm
in µS/cm
Parameters 1, 2 and 3. Ponsel recommends that the sensor be exposed to air.
in µS/cm
Parameters 1, 2 and 3. example of value (recommended by Ponsel): 111800 µS/cm
Information available
Used for measurement parameter setting
Used for measurement:
Used for POD parameter setting:
Used for parameter calibration
System, used exclusively by Ponsel
NU Not used
Parameter 4
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
Comments:
Comments:
Temperature measurement
Unit: °C
Rectified measurement 2 :
Rectified measurement 2 :
Gross measurement :
Comments : Salinity does not calibrate these parameters are derived from the measu
Information
Description of measure :
slope
Cal 2
the value of measure
0x01
0x02
0x03
the value of measure, close to
Cal 3
'0mS/cm' (offset)
slope
Cal 4
the value of measure
0x01
0x02
0x03
Cal 5 NU
Cal 6 NU
Cal 7 NU
Cal 8 NU
Cal 9 NU
Cal 10 NU
Cal 11 NU
Cal 12 NU
Cal 13 NU
Cal 14 NU
Cal 15 NU
Cal 16 NU
CTZ/Salinity/Temp PONSEL "
50
SN-PCTZA-xxxx
10
32.32 (0.0)
mS / cm g/Kg mS / cm
used in °C NU
NU
NU
NO NU NU
NU
NU
NU
NU NU NU
NU NU NU
°C Temperature
% Temperature
mS/cm Parameter 1 and 2.
% Parameter 1 and 2.
mS/cm Parameter 1 and 2.
% Parameter 1 and 2.
Unit Comments :
Cal for parameter
°C Temperature Value recommended by Ponsel : close to 0°C
°C Temperature Value recommended by Ponsel : close to 25°C
Parameter 1 and 2.
unit in mS/cm - Calculating the slope (Manual calibrationl)
Parameter 1 and 2.
unit in mS/cm - Calculating the slope (Manual calibrationl)
Parameter 4
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
NU
Remarques :
Comments :
he slope :
sensor in buffer and send the buffer value in mS/cm
The automatic calibration is not currently available on our pods
Ponsel : XXX mS/cm).
Put the sensor in the air.
Manual calibrationl)
he slope :
sensor in buffer and send the buffer value in mS/cm
The automatic calibration is not currently available on our pods
Ponsel : XXX mS/cm).
Put the sensor in the air.
Manual calibrationl)
Unit : °C %
Corrected measurement 1 :
Corrected measurement 2 :
Gross measurement :
Measurement impossible with INFO 3 Power supply is too low or too loud or there is at least
Standard 6
Standard 7
Standard 8 NU
Standard 9 NU
Standard 10 NU
Standard 11 NU
Standard 12 NU
Standard 13 NU
Standard 14 NU
Standard 15 NU
Standard 16 NU
NU
g/l FAU NU
Site historical NU
NU NU NU
NU
NU
NU
In use In use NU
NO NO NU
NU
NU
NU
NU NU NU
In use In use NU
Temperature
Temperature
Parameter 3
Parameter 3
Parameter 1
Parameter 2
Parameter 2
Used to memorise substance value
Used to memorise dry weight value
Parameter 2
POD Description
Default address 70
Serial number SN-PUVTy-xxxx
Default averaging value 10
Version protocol Modbus 3.0
Unit : °C 1/m
Corrected measurement 2 : NU
Gross measurement : NU
Measurement impossible with INFO 3 Power supply voltage is too low or too high
Information : Unit :
Standard 2 NU
Standard 4 NU
Standard 5 NU
Standard 6 NU
Standard 7 NU
Standard 8 NU
Standard 9 NU
Standard 10 NU
Standard 11 Offset input COD éq. mg/l
Standard 12 Slope input COD éq. m.mg/l
Standard 13 Offset input BOD éq. mg/l
Standard 14 Slope input BOD éq. m.mg/l
Standard 15 Offset inputt TOC éq. mg/l
Standard 16 Slope input TOC éq. m.mg/l
NU NU NU
NU
NU
NU
NO NO NO
the measurement returns UV the measurement returns the the measurement returns the
transmittance "zero" compensated GREEN absorbance GREEN transmittance "zero"
NU
NU
NU NU NU
ower supply voltage is too low the measurement could be less reliable
supply voltage is too low or too high or There are at least 1 defective device
Measurement is not possible, the measurement returns the error code associated with the problem
are based on default coefficient.
Temperature
Temperature
Parameter 3 Used to redo the "zero" absorbance/ tranmitance to 1.0