Professional Documents
Culture Documents
Teleskoplastare Roto W488EN 1017 PDF
Teleskoplastare Roto W488EN 1017 PDF
EN
Merlo's factories in San Defendente di Cervasca (Cuneo) cover
an area of 300,000 m2 (with 220,000 m2 indoor facilities) 11
10
9
2
7
1 8
6
3
5
4
1. Merlo SpA main offices
2. Final assembly lines
3. Lines for assembling components and cabs
4. Moulding of technopolymers
5. Automated storing and shipping centre
6. Machines plus attachments shipping centre
7. Final quality control
8. Technological centre
9. Steel and structural assembly lines centre
10. 3M attachments
11. CFRM (Training & Research Centre)
2|3 THE MERLO GROUP
+ Versatility a Continuous rotation of the turret on MCSS models, • Turret with continuous rotation
a Over 30 usable attachments • Tier 4 Final engines 170 HP
ROTO MCSS
Compact, practical and efficient,
from 16 to 30 metres
FEATURES
• 1010 mm cab. The largest on the market
• EPD (Eco Power Drive as standard)
• Hydrostatic transmission with two gears
• Load sensing pump
• 4-wheel drive is always engaged
• Finger Touch reverse shuttle as standard
• Tac-Lock system for attachment clamping
• Tier 4 Final engine, 170 HP, 4 cyl., 4.5 litres equipped
with SCR (AdBlue)
• Telescopic boom stabilisers
• Electronic joystick
• Merlin (Merlo Interactive Network)
• Interactive system for safety management
telescopic boom, information and diagnostics
• EAS hydropneumatic suspensions for movements in max
comfort/safety
• MCSS Made up of 5 models:
Lifting capacity from 4 to 6 tons
Maximum height from 16 to 30 metres
6|7 THE NEW RANGE
OPENING LEVELLING
ROTO RANGE ENGINE EPD CAB CHASSIS TRANSMISSION SAFETY SPEED
STABILISERS STABILISERS
MAXIMUM IN KM/H
EAS SUSPENSIONS
ECO POWER DRIVE
POST-TREATMENT
TIER 4 FINAL (HP)
TURRET
2V HYDROSTATIC
ROTATION
AUTOMATIC
SYSTEM
STEADY
TILTING
MODEL
TYPE
Continuous ROTO45.21MCSS 170 SCR (AdBlue) P P P P P P 40
Independent
Continuous ROTO50.16MCSS 170 SCR (AdBlue) P P P P P P 40
telescopic
1 - Axle
2 - Hydrostatic oil tank
Potentiometer to manually
3 - Propeller shaft
set diesel engine rpm
4 - Hydrostatic engine
5 - Radiators
6 - Diesel engine 1 5 6
7 - Hydrostatic pump
8 - Hydraulic pipelines
3
2
8 7 • EPD as standard: ensures
Reduced consumption 4
reduced consumption by 18%
Merlo EPD technology 8 during movement and driving
100 3
SAVING
80 • Electronic rpm management
60 (top photo)
40 1
20
• Tier 4 Final engines
0
125 kW (170 HP)
Mixed cycle (l/h)
Competitors EPD
10 | 11 ROTO MCSS ENGINES
• SCR post-treatment
technology: reliable, provides
A excellent performance
and low operating consumption
1 2
4
5
12 | 13 CAB
MCSS cab
Electronic joystick and Merlin system
The MCSS version uses the joystick • The MCSS uses the Merlin
on the reclining armrest. System (Merlo Interactive
The right console contains
the display, the Merlin interactive Network) with digital screen
instrument panel
and the control panel for the
telehandler stabilisers.
• Interactive management
of the main parts of the machine
and graphic display
The second armrest with joystick (optional) • The MCSS console is specifically
allows extension of the
boom, carriage angling and control of the
for telehandler stabiliser
attachments. management
The combined action with the basic joystick
(image on the right) speeds up operations • Second armrest with Joystick
for better productivity. (opt) allows multiple operations
to speed up operations
Tilting cab as standard on Roto 60.24
MCSS, 40.26 MCSS and 40.30 MCSS
Greater productivity and comfort
From the driver's seat, the operator presses the dedicated button to activate cab tilting.
The longitudinal tilting reaches 18° and makes it possible to monitor load movements when
working at height. This system (Merlo exclusive) guarantees:
aMore comfort
aBetter ergonomics
aIncreased safety
18°
ROTO stabilisers
The entire family is equipped with automatic
stabilisation and levelling as standard
ROTO MCSS
2 1
4 independent stabilisers. The possibility to stabilise with the booms totally "closed" is
guaranteed. The stabilising is done in two phases: • All Roto models are fitted
1. Side exit of the boom (blue arrow) 2. Descent of the jack stem (red arrow). with a console to manage
the stabilisers
Management of the jacks (independent in the front and • On the MCSS models,
in a pair in the back) to obtain chassis levelling. the telehandler stabilisers
can be positioned
at any width
Keep button 1 pressed for three seconds to activate
1
the self-stabilising mode. Button 2 activates • The MCSS models offer manual
2
self-retraction. levelling of the stems
of the vertical jacks
Self-levelling is carried out automatically at the completion
of self-stabilisation, ensuring that the chassis is horizontal
• Automatically,
for maximum operating safety. the self-stabilising and self-
levelling are activated
MERLIN
• Lightweight structure
with high torsional stiffness
TRAINING CENTRE
The Merlo Training and
Research Centre (CFRM)
has made safety training
and instruction in the use
of the machine its mission.
The CFRM provides
training courses
for operators of person-
carrying overhead
platforms, forklift trucks,
telehandlers, cranes, earth-
moving machinery,
agricultural and forestry
tractors, snow ploughs and
RESIDENT
6 SISTER COMPANIES
REGIONAL urban cleaning vehicles.
DIRECTOR
OVER 50 MARKETS
OVER 600 DEALERS
Sydney
2013
Developing
multi-purpose solutions
More efficiency and productivity
thanks to Merlo design
Merlo adopts simple and effective guidelines in the evolution of its products.
From conception to development, everything is studied, designed and created
in the Group’s research centre. This simple “rule” also applies to attachments.
Backed by years of experience, Merlo’s engineers have developed a wide range of attachments,
divided by type and load capacity.
This way of working makes possible to offer a wide portfolio of well tested and interchangeable
equipment that save time and fatigue.
CARRIAGE-MOUNTED HOOK FLY JIB WITH WINCH DIGGING BUCKET CONCRETE BUCKET
The hydraulic rotation around the vertical axis of many Merlo Regardless of the type of platform being used, the operator
overhead platforms allows work with the machine tilted controls all movements from on board the platform
S
R
C
H
E
L
A
17
16
15
14
13
12
11
10
9
8
0,5 m
0,5 m
7
6
5
1300 kg
1600 kg
2000 kg
2500 kg
3000 kg
4000 kg
5000 kg
1000 kg
1500 kg
2000 kg
2500 kg
3500 kg
600 kg
750 kg
4
3
2
1
0
-1
13 12 11 10 9 8 7 6 5 4 3 2 1 0 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ROTO MCSS
ROTO
S
S
R R
ROTO
ROTO ROTO
P 40.25MCSS
P
F F
C C
H H
E E
L L
A A
A (mm) 6600 H (mm) 2400 P (mm) 2950 A (mm) 6980 H (mm) 2400 P (mm) 2990
C (mm) 2970 L (mm) 4950 R (mm) 4050 C (mm) 2970 L (mm) 4950 R (mm) 4050
E (mm) 5030 M (mm) 1010 S (mm) 6100 E (mm) 5030 M (mm) 1010 S (mm) 6580
F (mm) 330 N (mm) 2505 F (mm) 330 N (mm) 2505
ROTO 45.21 MCSS ROTO 45.21 MCSS ROTO 40.26 MCSS ROTO 40.26 MCSS
FORKS ON STABILISERS ON 360° FORKS ON FRONT TYRES FORKS ON STABILISERS ON 360° FORKS ON FRONT TYRES
26 26
25 25
21 21 24 24
20 20 23 23
19 19 22 22
18 18 21 21
17 17 20 20
16 16 19 19
15 15 18 18
17 17
14 14 16 16
13 13 15 15
12 12 14 14
11 11 13 13
10 10 12 12
9 9 11 11
8 8 10 10
9 9
0,5 m
7 7
0,5 m
6 6 8 8
7 7
0,5 m
0,5 m
5 5
4000 kg
1000 kg
1500 kg
2000 kg
2500 kg
3000 kg
1000 kg
1500 kg
2000 kg
2500 kg
3000 kg
3500 kg
1000 kg
1500 kg
2000 kg
2500 kg
3000 kg
3500 kg
4000 kg
4500 kg
1000 kg
1500 kg
2000 kg
2500 kg
3000 kg
6 6
200 kg
500 kg
150 kg
200 kg
500 kg
750 kg
750 kg
200 kg
500 kg
4 4 5 5
3 3 4 4
2 2 3 3
1 1 2 2
0 0 1 1
-1 -1 0 0
-1 -1
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 16151413121110 9 8 7 6 5 4 3 2 1 0
28 | 29 ROTO MCSS
R R
S S
ROTO ROTO
60.24 MCSS 40.30 MCSS
P P
F F
C H C H
E L E L
A A
A (mm) 7430 H (mm) 2490 P (mm) 3100 A (mm) 7560 H (mm) 2490 P (mm) 3100
C (mm) 3200 L (mm) 5275 R (mm) 4450 C (mm) 3200 L (mm) 5275 R (mm) 4500
E (mm) 5540 M (mm) 1010 S (mm) 6500 E (mm) 5540 M (mm) 1010 S (mm) 6770
F (mm) 380 N (mm) 3000 F (mm) 380 N (mm) 3000
ROTO 60.24 MCSS ROTO 60.24 MCSS ROTO 40.30 MCSS ROTO 40.30 MCSS
FORKS ON STABILISERS ON 360° FORKS ON FRONT TYRES FORKS ON STABILISERS ON 360° FORKS ON FRONT TYRES
29
28
27
24 24 26
23 23 25
22 22 24
21 21 23
20 20 22
19 19 21
20
18 18
19
17 17
18
16 16 17
15 15 16
14 14 15
13 13 14
12 12 13
11 11 12
10 10 11
9 9 10
8 8 9
1000 kg
1500 kg
2000 kg
2500 kg
3000 kg
3500 kg
4000 kg
4000 kg
1000 kg
1500 kg
2000 kg
2500 kg
3000 kg
3500 kg
0,6 m
500 kg
250 kg
500 kg
750 kg
400 kg
750 kg
0,5 m
7 7 8
0,6 m
6 6 7
0,5 m
6000 kg
1000 kg
1500 kg
2000 kg
3000 kg
4000 kg
5000 kg
1200 kg
1600 kg
2000 kg
3000 kg
4000 kg
5000 kg
5 5 6
250 kg
500 kg
850 kg
4 4 5
3 3 4
3
2 2
2
1 1
1
0 0 0
-1 -1 -1
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TECHNICAL INFORMATION
30 | 31 TECHNICAL INFORMATION
TECHNICAL INFORMATION 50.16 45.21 60.24 40.26 40.30 TECHNICAL INFORMATION 50.16 45.21 60.24 40.26 40.30
MCSS MCSS MCSS MCSS MCSS MCSS MCSS MCSS MCSS MCSS
Total unladen mass, with forks (kg) 14750 15050 18900 16050 19200 Auxiliary hydraulic service on boom P P P P P
Maximum capacity (kg) 5000 4500 6000 4000 4000 Two floating forks (length 1200 mm) P P P P P
Maximum reach (m) 13,3 17,8 20 22,9 25,4 Hydrostatic oil tank (l) 12 12 12 12 12
Maximum operating height (m) 11 10,6 12 13,9 19,5 Finger-Touch reverse shuttle P P P P P
Maximum operating reach (m) 6,1 7,6 7 8,2 10,4 Permanent four-wheel drive P P P P P
Capacity at maximum height (kg) 3000 2500 3000 1500 1500 Four-wheel steering P P P P P
Capacity at maximum reach (kg) 1300 750 850 150 400 Disc service brakes P P P P P
Turbo engine (brand/cylinders) FPT/4 Tyres 18-22.5 18-22.5 445/65-22.5 18-22.5 445/65-22.5
Engine power (kW/HP) 125/170 (Tier 4 Final) Remote control p p p p p
Fuel tank (l) 150 150 155 150 155 Tyre seat P P P P P
Speed in 2nd gear (km/h) 40 40 40 40 40 Four working headlights on cab (2A + 2P) p p p p p
LS Load Sensing and FS Flow Sharing hydraulic 240-115 FS Manual air conditioning
system (bar-l/min) p p p p p
Hydraulic oil tank (l) 120 120 200 120 200 Windscreen wiper on roof window p p p p p
Battery (Ah) 160 160 160 160 160 Front and upper blinds p p p p p
Hydro-pneumatic suspensions P P P P P
Performances refer to the machine equipped with forks, operating on stabilisers.
Cab compliant with FOPS (ISO 3449) P P P P P
P As standard. p On request.
Upward tilting cab - - P P P
MERLO
1964-2014
MACHINE
AN HISTORIC ITALIAN COMPANY OF THE YEAR 2015
The Telehandlers outlined in this documentation can be equipped with optional or special accessories that are not included in standard equipment but only on request.
In certain countries, not all models or attachments may be available because of market or regulatory restrictions.
Technical data and information are up-to-date at the time of printing this documentation. Merlo reserves the right to make modifications arising from natural technological evolution without any obligation on its part.
Your trusted Merlo Dealer will be delighted to provide you with all updates concerning our products and services.