Professional Documents
Culture Documents
SeriesOneDR Timer
• 6 Amp AC and DC rated output
• Compact size (11mm wide)
• Dual SCR or MOSFET output
• AC/DC control
• Zero-crossing (resistive loads) or random-fire (inductive loads) AC output
• Timer status LED indicator
• UL listed, HP rated
• 8 Industry standard fuctions (A/At, B, C, D/Di, H/Ht, L/Li, Ac and Bw)
PRODUCT SELECTION
Control Voltage AC Output DC Output
12-24 VAC/DC DRTx24D06x DRTx06D06
90-140 VAC/DC DRTx24B06x
180-280 VAC/DC DRTx24A06x
AVAILABLE OPTIONS
Operating Voltage
06: 60 VDC Rated Load Current
Series 24: 280 VAC 06: 6 Amps
DRT A 24 D 06 R
Timing Function Control Voltage Switching Type
A: A/At, Delay on Make D: 12-24 VAC/DC (24 suffix only)
AC
B: Single Shot A: 180-240 VAC/DC Output Blank: Zero Voltage Turn-On
C: Delay on Break B: 90-140 VAC/DC Only R: Random Turn-On
H: H/Ht, Interval
L: L/Li, Repeat Cycle
Required for valid part number
U: Multifunction
(A/At, H/Ht, D/Di, For options only and not required for valid part number
B, C, Ac & Bw) * Not all part number combinations are available.
Contact Crydom Technical Support for information on
the availability of a specific part number.
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 3750 Vrms (8)
Minimum Insulation Resistance (@ 500 VDC) 109 Ohm
Maximum Capacitance, Input/Output 10 pF
Ambient Operating Temperature Range -30 to 80 °C
Ambient Storage Temperature Range -40 to 125 °C
Weight (typical) 1.76 oz (50 g)
Housing Material UL 94 V0 Self-extinguishing
Terminal Finish Sulfamate Nickel
Humidity 5 - 85% Non condensing
RoHS Exemption #’s 5(a), 7(a), 7(c)-I
WIRING DIAGRAM
(+ / )
A2
Load ( )
INPUT
CONTROL +3/A1 Y1 +1/L1
AC/DC CONTROL A1
Status
VOLTAGE
AC Output (Input)
Indicator
TIMER
Y1
4/A2 2/T1
(– / ) ( )
(+ / ) (10)
Load (+)
INPUT
+3/A1 +1/L1
CONTROL Y1
L1 T1
Status DC Output
Indicator
d
TIMER Load
AC/DC SUPPLY
4/A2 2/T1
(OUTPUT) Loa
(– / ) (–)
5 6 7
1h 0.1 h to 1 h
BC
Multifunction
10m1
h Di
AcBw
10 h 1 h to 10 h
4
10h100
[A/At, H/Ht, D/Di,
h
1 2 3
L
1m
1m
5 6 7
5 6 7
10m1
10m1
Repeat Cycle
h h
4
4
10h100 10h100
h
1 2 3 1 2 3
A
Delay on Make
H 1s 10s 8 9 10
1m
5 6 7
Interval
10m1
h
4
10h100 1 2 3
h
C
Delay on Break Flat side indicates selection
GENERAL NOTES
(1) All parameters at 25°C unless otherwise specified.
(2) See derating curves.
(3) Off-State dv/dt test method per EIA/NARM standard RD-443, paragraph 13.11.1
(4) For UL Listing, must use wire rated @ 75°C.
(5) For DC output model minimum current spec is 15.7/12.4ma (AC/DC).
(6) For DC output model maximum current spec is 27.9/20.3ma (AC/DC).
(7) For DC output mode, spec is 1K.
(8) For DC output model, spec is 2500V.
(9) Activation Time = 65ms / Deactivation Time = 100 ms.
(10) Inductive loads must be diode suppressed to prevent damage to output.
(11) Timing accuracy ± 10%. Additional functions and time ranges are also available,
please contact your local authorized Crydom Distributor, Representative or Crydom
Sales office and request information about our custom products.
(12) Do not apply a push force greater than 9.8N(2.2lbf) and Stop torque 4Ncm.
(13) Do not apply a push/pull force greater than 5N(1.12lbf) and torque 20Nm.
MECHANICAL SPECIFICATIONS
Tolerances: ±0.02 in / 0.5 mm
All dimensions are in: inches [millimeters] 2.87
[73.0]
2.02 0.44
[51.2] [11.0]
(12)
3.44
[87.3]
4/A2 2/T1
DRTL06D06
3.27
4WB8
[83.0] S OL I D S TAT E T I M E R
INPUT 12-24 VDC
General Use 60VDC/6Arms
+3/A1 @40°C Ambient Temperature +1/L1
IND. CONT. EQ
Y1
(13)
INPUT
STATUS
1.76
[44.8]
2.59
[65.9]
3.45
[87.7]
5
Load Current (Amps)
0
0 10 20 30 40 50 60 70 80
Off Off Off Ht function is identical to the H function except when Y1 is connected to A1 timing is paused. When Y1 is
Off
removed timing resumes until relay times out. To reset timer remove control power.
H/Ht On On On Long Flashes C C t1 t2 t3
Interval
H T Ht Y1
T=t1+t2+t3
On Timed Out Off Short Flashes L L
To select between on time (Di) first or off time (D) first Y1 is connected. Default is On time (Di) first, for Off
Off Off Off Off time (D) first connect Y1. Equal On/Off time.
D/Di C C
Repeat Cycle Di
On On On/Off Long Flashes/Short Flashes D A1Y1
T T T T T T T T T T
L L
To select between on time (Li) first or off time (L) first Y1 is connected A1. Default is On time (Li) first, for Off
Off Off Off Off time (L) first connect Y1 to A1. Time delay is independent of each other.
L/Li C C
Repeat Cycle
L A1Y1 Toff Ton Toff Ton Toff
Li Ton Toff Ton Toff
On On On/Off Long Flashes/Short Flashes
L L
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
IEC 60068-2-6 : Vibration 0.35mm and 0.75mm Amplitutde over 10-55 Hz
IEC 60068-2-27 : Shock 15G/11ms
IEC 61000-4-2 : Electrostatic Discharge Level 3
IEC 61000-4-4 : Electrically Fast Transients Level 3
IEC 61000-4-5 : Electrical Surges Level 3
• The product's side panels may be hot, allow • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie
the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren.
• Follow proper mounting instructions including toucher. • Beachten Sie die Montageanweisungen,
torque values. • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder
• Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein.
this product. • Ne pas laisser pénétrer de liquide ni de corps
étrangers à l'intérieur du produit.
Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann
Failure to follow these instructions can result in des lésions corporelles graves ou des
serious injury, or equipment damage. Körperverletzung oder Materialschäden
dommages matériels. zur Folge haben.
Semiconductor die
Solder
附件 - 环保信息
部件 有毒有害物质或元素
名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE)
半导体芯片
焊接点
50