1. The document describes the functions of different trimmers on an AE600N device in its old and new versions.
2. In the old version, trimmers were located on different boards to adjust things like voltage output, LCD contrast, and flow cell temperature for different settings.
3. In the new version, the power and driver board functions were combined with the CPU board, and the trimmers were adjusted to control flow cell temperature, display temperature, voltage references, and amplifier outputs.
1. The document describes the functions of different trimmers on an AE600N device in its old and new versions.
2. In the old version, trimmers were located on different boards to adjust things like voltage output, LCD contrast, and flow cell temperature for different settings.
3. In the new version, the power and driver board functions were combined with the CPU board, and the trimmers were adjusted to control flow cell temperature, display temperature, voltage references, and amplifier outputs.
1. The document describes the functions of different trimmers on an AE600N device in its old and new versions.
2. In the old version, trimmers were located on different boards to adjust things like voltage output, LCD contrast, and flow cell temperature for different settings.
3. In the new version, the power and driver board functions were combined with the CPU board, and the trimmers were adjusted to control flow cell temperature, display temperature, voltage references, and amplifier outputs.
Trimmer Function(Old version) type No. Pre: VR1 Adjust amplifier Voltage output 3296-10k when light is blocked thoroughly. Keyb: VR1 Adjust contrast of LCD. 3296-10k Pow: VR1 Adjust flow cell temperature when 3296-1k 37 is selected Pow: VR2 Adjust flow cell temperature when 3296-1k 32 is selected Pow: VR3 Adjust flow cell temperature when 3296-1k 30 is selected Pow: VR4 Adjust flow cell temperature when 3296-1k 25 is selected Cpu: VR1 Adjust display temperature.**** 3296-10k Cpu: VR2 Adjust output of lin-log converter, 3296-5k make log2-log1=0.5*log(lin1/lin2),when lin1/lin2 about 2.0 Cpu: VR3 Adjust output of lin-log converter, 3296-10k make log2-log1=0.5*log(lin1/lin2),when lin1/lin2 about 40.0 Cpu: VR4 Adjust output of amplifier to 3296-10k 00000-00010 when input connect to GND Cpu: VR6 Adjust reference voltage, make 3296-10k voltage of J10 in range 0.999-1.001V
**** connect p2 and p3 of sw2, adjust VR1 to make the
voltage of sw3 p1-3 about 0.6*p2-3. As the measurement range of A/D is 2.0V, we must control the input voltage of A/D lower than 2.0V. VR1 is used to adjust display temperature voltage in this range. The display voltage of 37degree is about 2.3V, so we select a 0.6 ratio can make the display temperature voltage of 42 degree in range 2.0V. it is good for temperature adjustment. AE600N new version
Note: in new design, the functions of pow&drv pcb is
combined with CPU pcb.
Trimmer Function(Old version) type No. Pre: VR1 Adjust amplifier Voltage output 3296-10k when light is blocked thoroughly. Keyb: VR1 Adjust contrast of LCD. 3296-10k Cpu: VR1 Adjust flow cell temperature when 3296-1k 25 is selected Cpu: VR2 Adjust flow cell temperature when 3296-1k 30 is selected Cpu: VR3 Adjust flow cell temperature when 3296-1k 32 is selected Cpu: VR4 Adjust flow cell temperature when 3296-1k 37 is selected Cpu: VR5 Adjust display temperature.**** 3296-10k Cpu: VR6 Adjust output of lin-log converter, 3296-10k make log2-log1=0.5*log(lin1/lin2),when lin1/lin2 about 40.0 Cpu: VR7 Adjust output of lin-log converter, 3296-5k make log2-log1=0.5*log(lin1/lin2),when lin1/lin2 about 2.0 Cpu: VR8 Adjust reference voltage, make 3296-10k voltage of J10 in range 0.999-1.001V
Cpu: VR9 Adjust output of amplifier to 3296-10k
00000-00010 when input connect to GND
**** connect p2 and p3 of sw1, adjust VR1 to make the
voltage of sw2 p1-2 about 0.6*p2-3. As the measurement range of A/D is 2.0V, we must control the input voltage of A/D lower than 2.0V. VR1 is used to adjust display temperature voltage in this range.