Professional Documents
Culture Documents
Designed to protect
Protecting components from damage can help to increase service life and maximise your return on investment. Shell Air Tool S2 A can help
to achieve this by
n exceeding the minimum industry standards for very good extreme- n providing good corrosion
pressure protection, protection,
as it passes load stage 12 of the high-torque, low-speed FZG test as it passes synthetic-seawater
bearing corrosion tests (ASTM
Minimum requirement
D665) and achieves a rating of
Shell Air Tool S2 A 100 1 in industry-standard copper-
strip corrosion tests (ASTM D130;
Industry-standard limit 3 hours at 100°C) in which a
rating of 1 represents very little
0 20 40 60 80 100 or no corrosion and a rating of
Better protection 4 indicates a corrosive lubricant.
Passing load stage (% of limit)
(ASTM D5182)
Designed for long oil life
Limiting fluid degradation can help to prolong oil life. Shell Air Tool S2 A is designed to help you operate your equipment for longer without
interruption for reduced maintenance requirements and enhanced availability. In the industry-standard oil life test, Shell Air Tool S2 A achieved
n up to 25% less thickening
than the maximum allowed after 312 hours at 121°C to ensure efficient and consistent lubrication.
Industry-standard limit
0 20 40 60 80 100
Lower is better
shell.com/lubricants