Professional Documents
Culture Documents
07
Replaces: 07.03
1/18
Sizes 6 and 10
H7082
Electrical connections
“K33L“ “DK35L“
+ +
1)
4 1 4 –
1 –
3 a 2 3 b
2
+
“K45L“ “DK24L“
+ +
1)
4 + 1 4
1 – –
3 a 2 3 b
2
1) Function ground
4/18 Bosch Rexroth AG Hydraulics M12x1 plug-in connection RE 08010/07.07
Hydraulic
High-performance variant Reduced power consump-
(also smoothly switching) tion “SO407“
Maximum operating pres- – Ports A, B, P bar [psi] 350 [5076] 315 [4569]
sure – Port T bar [psi] 210 [3046] 210 [3046]
Maximum flow l/min [US gpm] 80 [21.1] 60 [15.9]
Hydraulic fluid 1);
Mineral oil (HL, HLP) to DIN 51524 fast bio-degradable
hydraulic fluids to VDMA 24568 (see also RE 90221);
HETG (rape seed oil) 1); HEPG (polyglycols) 2); HEES
(synthetic esters) 2); other hydraulic fluids on request
Electrical
M12x1 plug-in connections 3) K33L, K45L, DK24L, K33L, K45L, DK35L
DK35L
Available voltages 4) V 24
Cut-off voltage peak – K33L, K45L, DK35L V –44 to –55 –44 to –55
limited – DK24L V Without limitation –
Voltage tolerance (nominal voltage) % ±10
Power consumption W 30 8
Duty cycle S1 (continuous operation)
Switching time – Standard ON ms 25 to 45 up to 60
to ISO 6403 – Smoothly switching ON ms 3 to 4 times longer than –
standard
– Standard OFF ms 10 to 25 up to 30
– Smoothly switching OFF ms 3 to 4 times longer than –
standard
Maximum switching fre- – Standard 1/h 15000 7200
quency – Smoothly switching 1/h 7200 –
Type of protection to DIN EN 60529 IP 65 5)
Maximum coil temperature 6) °C [°F] 150 [302] 110 [230]
[0.39]
17 12
10
A B
102 [4]
F1
T F2
A B
F4
P F3
G
Note!
Missing dimensions, explanations of items, valve fixing
screws and subplates can be found in the relevant basic data
sheet:
– RE 23178 (standard valve)
– RE 23183 (smoothly switching)
– RE 23178-00 (reduced power consumption)
6/18 Bosch Rexroth AG Hydraulics M12x1 plug-in connection RE 08010/07.07
12 17
[0.39] 10 48 [1.89]
98 [3.86]
71 [2.80]
F1 F2
T
A B
F3
F4 P
G
Note!
Missing dimensions, explanations of items, valve fixing
screws and subplates can be found in the relevant basic data
sheet:
– RE 23178 (standard valve)
– RE 23183 (smoothly switching)
– RE 23178-00 (reduced power consumption)
RE 08010/07.07 M12x1 plug-in connection Hydraulics Bosch Rexroth AG 7/18
Hydraulic
Maximum operating pres- – Ports A, B, P bar [psi] 315 [4569]
sure – Port T bar [psi] 210 [3046]
Maximum flow l/min [US gpm] 120 [31.7]
Hydraulic fluid Mineral oil (HL, HLP) to DIN 51524 1); fast bio-degradable
hydraulic fluids to VDMA 24568 (see also RE 90221);
HETG (rape seed oil) 1); HEPG (polyglycols) 2); HEES
(synthetic esters) 2); other hydraulic fluids on request
Electrical
Type .WE 10 …(D)K… Type 5-.WE 10 …K…
(also smoothly switching) (5-chamber variant)
M12x1 plug-in connections 3) K33L, DK24L, DK35L K33L
Available voltages 4) V 24
Cut-off voltage peak – K33L, DK35L V –44 to –55 –44 to –55
limited – DK24L V Without limitation –
Voltage tolerance (nominal voltage) % ±10
Power consumption W 35
Duty cycle S1 (continuous operation)
Switching time – Standard ON ms 45 to 60 45 to 75
to ISO 6403 – Smoothly switching ON ms 3 to 4 times longer than –
standard
– Standard OFF ms 20 to 30 35 to 45
– Smoothly switching OFF ms 3 to 4 times longer than –
standard
Maximum switching fre- – Standard 1/h 15000 15000
quency – Smoothly switching 1/h 7200 –
Type of protection to DIN EN 60529 IP 65 5)
Maximum coil temperature 6) °C [°F] 150 [302] 110 [230]
10 [0.39]
20 12
A B
126 [4.96]
F1 F2
TA A B TB
F4 F3
Note!
Missing dimensions, explanations of items, valve fixing
screws and subplates can be found in the relevant basic data
sheet:
– RE 23327 (standard valve)
– RE 23183 (smoothly switching)
RE 08010/07.07 M12x1 plug-in connection Hydraulics Bosch Rexroth AG 9/18
12 20
10 [0.39] 48 [1.89]
125 [4.92]
97,5 [3.84]
Note!
Missing dimensions, explanations of items, valve fixing
screws and subplates can be found in the relevant basic data
sheet:
– RE 23327 (standard valve)
– RE 23183 (smoothly switching)
10/18 Bosch Rexroth AG Hydraulics M12x1 plug-in connection RE 08010/07.07
10 [0.39]
18 10
A B
126 [4.96]
F1 F2
TA A B TB
F4 F3
Note!
Missing dimensions, explanations of items, valve fixing
screws and subplates can be found in the relevant basic data
sheet RE 23351.
RE 08010/07.07 M12x1 plug-in connection Hydraulics Bosch Rexroth AG 11/18
Hydraulic
Maximum operating pressure bar [psi] See basic data sheet RE 22049 (performance limits)
Maximum flow l/min [US gpm] 25 [6.6]
Hydraulic fluid Mineral oil (HL, HLP) to DIN 51524 1); fast bio-degradable
hydraulic fluids to VDMA 24568 (see also RE 90221);
HETG (rape seed oil) 1); HEPG (polyglycols) 2); HEES
(synthetic esters) 2); other hydraulic fluids on request
Electrical
M12x1 plug-in connection 3) K33L
Available voltages 4) V 24
Cut-off voltage peak limited V –44 to –55
Voltage tolerance (nominal voltage) % ±10
Power consumption W 30
Duty cycle S1 (continuous operation)
Switching time to ISO 6403 – ON ms 40 to 70
– OFF ms 10 to 20 (without rectifier)
30 to 45 (with rectifier)
Maximum switching frequency 1/h 15000
Type of protection to DIN EN 60529 IP 65 5)
Maximum coil temperature 6) °C [°F] 150 [302]
6 11
[0.39]
10
102 [4]
F1
T F2
B
A
F4
P F3
Note!
Missing dimensions, explanations of items, valve fixing
screws and subplates can be found in the relevant basic data
sheet RE 22049.
RE 08010/07.07 M12x1 plug-in connection Hydraulics Bosch Rexroth AG 13/18
Hydraulic
Maximum operating pressure bar [psi] See basic data sheet RE 22045 (performance limits)
Maximum flow l/min [US gpm] 40 [10.6]
Hydraulic fluid Mineral oil (HL, HLP) to DIN 51524 1);
fast bio-degradable hydraulic fluids to VDMA 24568 (see
also RE 90221); HETG (rape seed oil) 1); HEPG (polygly-
cols) 2); HEES (synthetic esters) 2); other hydraulic fluids
on request
Electrical
M12x1 plug-in connection 3) K33L
Available voltages 4) V 24
Cut-off voltage peak limited V –44 to –55
Voltage tolerance (nominal voltage) % ±10
Power consumption W 30
Duty cycle S1 (continuous operation)
Switching time to ISO 6403 – ON ms 30 to 50
– OFF ms 10 to 20 (without rectifier)
35 to 45 (with rectifier)
Maximum switching frequency 1/h 15000
Type of protection to DIN EN 60529 IP 65 5)
Maximum coil temperature 6) °C [°F] 150 [302]
5 13
[0.39]
10
102 [4]
F1
P F2
A B
TA TB
F4 F3
Note!
Missing dimensions, explanations of items, valve fixing
screws and subplates can be found in the relevant basic data
sheet RE 22045.
RE 08010/07.07 M12x1 plug-in connection Hydraulics Bosch Rexroth AG 15/18
Hydraulic
Maximum operating pressure bar [psi] See basic data sheet RE 22058 (performance limits)
Maximum flow l/min [US gpm] 25 [6.6]
Hydraulic fluid Mineral oil (HL, HLP) to DIN 51524 1); fast bio-degradable
hydraulic fluids to VDMA 24568 (see also RE 90221);
HETG (rape seed oil) 1); HEPG (polyglycols) 2); HEES
(synthetic esters) 2); other hydraulic fluids on request
Electrical
High-performance variant Reduced power consump-
tion “SO407“
M12x1 plug-in connection 3) K33L
Available voltages 4) V 24
Cut-off voltage peak limited V –44 to –55
Voltage tolerance (nominal voltage) % ±10
Power consumption W 30 8
Duty cycle S1 (continuous operation)
Switching time to ISO 6403 – ON ms 25 to 40 (without rectifier) 50 (spool symbol “C“)
30 to 55 (with rectifier) 55 (spool symbol “U“)
– OFF ms 10 to 15 (without rectifier) 30 (spool symbol “C“)
35 to 55 (with rectifier) 15 (spool symbol “U“)
Maximum switching frequency 1/h 15000 7200
Type of protection to DIN EN 60529 IP 65 5)
Maximum coil temperature 6) °C [°F] 150 [302] 110 [230]
15
F1
T F2
B
A
F4
P F3
Note!
Missing dimensions, explanations of items, valve fixing
screws and subplates can be found in the relevant basic data
sheet RE 22058.
RE 08010/07.07 M12x1 plug-in connection Hydraulics Bosch Rexroth AG 17/18
Hydraulic
Maximum operating pressure bar [psi] See basic data sheet RE 22075 (performance limits)
Maximum flow l/min [US gpm] 40 [10.6]
Hydraulic fluid Mineral oil (HL, HLP) to DIN 51524 1); fast bio-degradable
hydraulic fluids to VDMA 24568 (see also RE 90221);
HETG (rape seed oil) 1); HEPG (polyglycols) 2); HEES
(synthetic esters) 2); other hydraulic fluids on request
Electrical
M12x1 plug-in connection 3) K33L
Available voltages 4) V 24
Cut-off voltage peak limited V –44 to –55
Voltage tolerance (nominal voltage) % ±10
Power consumption W 30
Duty cycle S1 (continuous operation)
Switching time to ISO 6403 – ON ms 25 to 60 (without rectifier)
30 to 70 (with rectifier)
– OFF ms 10 to 20 (without rectifier)
30 to 70 (with rectifier)
Maximum switching frequency 1/h 15000
Type of protection to DIN EN 60529 IP 65 5)
Maximum coil temperature 6) °C [°F] 150 [302]
15
F1 F2
P 0,01/100
[0.0004/4.0]
A B
Rzmax 4
Bosch Rexroth AG © This document, as well as the data, specifications and other information
Hydraulics set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
Zum Eisengießer 1 reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No state-
Phone +49 (0) 93 52 / 18-0 ments concerning a certain condition or suitability for a certain application
Fax +49 (0) 93 52 / 18-23 58 can be derived from our information. The information given does not
documentation@boschrexroth.de release the user from the obligation of own judgment and verification. It
www.boschrexroth.de must be remembered that our products are subject to a natural process of
wear and aging.
RE 08010/07.07 M12x1 plug-in connection Hydraulics Bosch Rexroth AG 19/18
Notes
Bosch Rexroth AG © This document, as well as the data, specifications and other information
Hydraulics set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
Zum Eisengießer 1 reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No state-
Phone +49 (0) 93 52 / 18-0 ments concerning a certain condition or suitability for a certain application
Fax +49 (0) 93 52 / 18-23 58 can be derived from our information. The information given does not
documentation@boschrexroth.de release the user from the obligation of own judgment and verification. It
www.boschrexroth.de must be remembered that our products are subject to a natural process of
wear and aging.
20/18 Bosch Rexroth AG Hydraulics M12x1 plug-in connection RE 08010/07.07
Notes
Bosch Rexroth AG © This document, as well as the data, specifications and other information
Hydraulics set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
Zum Eisengießer 1 reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No state-
Phone +49 (0) 93 52 / 18-0 ments concerning a certain condition or suitability for a certain application
Fax +49 (0) 93 52 / 18-23 58 can be derived from our information. The information given does not
documentation@boschrexroth.de release the user from the obligation of own judgment and verification. It
www.boschrexroth.de must be remembered that our products are subject to a natural process of
wear and aging.