Professional Documents
Culture Documents
FSD300GR 1data Sheet
FSD300GR 1data Sheet
基础上提供更加具有价格竞争力的产品。 DF在高频10G测试下为0.0009
脂和填料结合后进行压制基板,使得其中的分子结构紧密结合,致 与大多数FR-4工艺兼容,适用多层设计
密性更高、DF更低,在高频信号测试中更稳定。该介电常数和极低 耐Anti-CAF 性能
的损耗因子表现出优良的电性能。较低的热膨胀系数,机械加工良 改进的Z轴热膨胀
好、电气性能及尺寸稳定性好,是射频天线及汽车雷达使用中高频、 优异的尺寸稳定性,厚度均匀,平整度
高速印制线路理想基材。 优良的通孔和焊接的可靠性
FSD300GR系列材料适用于环保无铅工艺,整个加工可在标准 互调要求≤-160dbc
~1~
FSD Laminate: FSD300GR
IPC-4103 Spec / 16 for Reference
TYPICAL PROPERTIES FOR FSD300GR LAMINATES
Units Test Method
Property Typical Value
Metric IPC-TM-650
(English) (or as noted)
Peel Strength, minimum
A. Low profile copper foil and very low profile copper
foil - all copper weights > 17m [0.669 mil] 2.19(12.5) 2.4.8
N/mm
B. Standard profile copper foil 2.4.8.2
1.92 (11.00) (lb/inch)
1. After Thermal Stress 2.4.8.3
2. At 125°C [257 F] 1.83 (10.5)
3. After Process Solutions 1.48 (8.50)
Thermal Resistance
A. T260 >15 Minutes 2.4.24.1
B. T288 >10 Minutes
The above data and fabrication guide provide designers and PCB shop for their reference. We believe that these information are accurate, however, the data
may vary depend on the test methods and specification used. The actual sales of the product should be according to specification in the agreement between FSD
and its customer. FSD reserves the right to revise its data at any time without notice and maintain the best information available to users.
~2~