Professional Documents
Culture Documents
Features
Individually addressed and controlled
multi-candela TrueAlert ES V/O (visible only)
notification appliances
Multi candela LED strobe available in low (15, 30,
and 75 cd) and high (110, 135 and 185 cd) range
candela models
Small compact design and low current draw due to
energy efficient strobe LEDs
Advanced addressable notification controlled by
IDNAC SLCs providing regulated 29 VDC allows
strobes to operate with lower current even under
battery backup
Wiring supervision to each appliance allowing “T
tapped” connections for Class B circuits to simplify
wiring (Class A circuits require in/out wiring)
Self-Test Mode allows on-board sensors to detect the
LED strobe output and then report their status to the
control panel TrueAlert ES 59VO Series LED Addressable Strobes are
TrueAlert Device Reports at the control panel Available in Red with White Lettering and White with Red
detailing appliance point ID, custom label, type, and Lettering
candela setting (see sample on page 3) Description
Magnet Test diagnostics to assist checkout and testing
of appliances and wiring TrueAlert ES LED Addressable Strobes are
Compatibility with ADA requirements individually addressed visible notification appliances that
Strobe operation is listed to UL Standard 1971 and receive power, supervision, and control signals from a
ULC Standard S526 Simplex fire alarm control panel providing IDNAC
Synchronized LED strobe operation on the same Signaling Line Circuits. LED and xenon tube strobes
IDNAC channel require operation on separate IDNAC channels.
S59VO-0002-1 12/2015
TrueAlert Operation Advantage (Cont’d) Diagnostics (Cont’d)
Reduced installation and testing time Silent Appliance Magnet Test pulses the indicator
Installation time and expense for retrofit or new LED sequentially in response to the application of a
construction can be significantly reduced with separate magnet to conveniently indicate the appliance’s address.
controls on the same two wire SLC. When Class B wiring
Operational Appliance Magnet Test briefly flashes the
is used, wiring can be “T” tapped, allowing more savings
strobe to indicate proper operation after the address is
in distance, wire, conduit (size and utilization), and indicated by pulsing the indicator LED.
overall installation efficiency. Use of Self-Test and
Magnet Test features improves installation efficiency. TrueStart Instrument Two (TSIT) helps with testing of
TrueAlert device reports conveniently identify IDNAC SLC wiring and TrueAlert ES appliances. Use it to
information about each connected appliance. test IDCs, NACs, and IDNet communications before
connection to the control panel. Please contact your local
TrueAlert ES Diagnostics Simplex representative for additional information.
Self-Test and Magnet Test diagnostic features provide TrueAlert Addressable Wiring Isolator
individual appliance testing for IDNAC SLCs. With the
Self-Test feature, appliance operation can be confirmed Isolator Model 4905-9929 is available for remote
without leaving the control panel. Additionally, each mounting on TrueAlert addressable circuits to isolate short
appliance’s indicator LED can be selected to pulse when it circuited wiring from functioning wiring. See data sheet
receives a supervision poll during normal operation. S4905-0001 for more information.
Product Selection
TrueAlert ES LED Wall Mount Addressable Strobe Appliances
Appliance and cover (dimensions with cover = 5 ¼” H x 3 ½ ” W x 1 ⅝” D / 132 mm x 86 mm x 39 mm)
Model* Color Wording Candela rating Model* Color Wording Candela rating
59VO-WRF (-BA) Red Low (15, 30 59VO-WRFH-BA Red High (110, 135
FIRE FIRE
59VO-WWF (-BA) White and 75 cd) 59VO-WWFH-BA White and 185 cd)
Appliance only
Model Color Candela rating Model Color Candela rating
59VO-APPLWR Red 59VO-APPLWRH Red
Low High
59VO-APPLWW White 59VO-APPLWWH White
Separate cover
Model Color Wording Model Color Wording
59VOC-WRF Red 59VOC-WWS White
FIRE Logos only
59VOC-WWF White 59VOC-WRS Red
59VOC-WRA Red ALERT 59VOC-WWA White ALERT
Separate European adapter back plate
Model Color Description
Wall mounting plate for mounting to UK (Deta DB164), Swiss (Kaiser 9063-01), or German (HSB, NIS
59AP-EUROBB Black
Kombi 372501686) back boxes.
* Note: (-BA) indicates model is available either with or without the -BA suffix. Model numbers ending in –BA are assembled in the USA.
2 S59VO-0002-1 12/2015
TrueAlert Device Reports Reference
Service Port Page 1
REPORT 5 : TrueAlert Device Report 12:34:56am TUE 16-Mar-15
DEVICE
POINT ID CUSTOM LABEL TYPE CANDELA
T14-1-1 Location Label . . . up to 40 characters AV-LH 15
T14-1-2 Break Room 5 AV-L 110
T14-1-3 Boiler Room VO-LH 75
T14-1-4 Elec. Room 7 VO-LH 135
Installation Reference
3 S59VO-0002-1 12/2015
IDNAC SLC Controller Compatibility Reference
Data Sheet IDNAC SLC Output Appliance Voltage
Compatible Controllers Controller Output
Reference Voltage Design Reference
4100ES with EPS+ or EPS Power Supply S4100-0100
4009 IDNAC Repeater S4009-0004 29 VDC 23 VDC
IDNAC SLC
4007ES with IDNAC Notification S4007-0002 (regulated) (with 6 VDC drop)
4010ES with ESS Enhanced System Supply S4010-0011
TYCO, SIMPLEX, and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited. NFPA 72 and National Fire Alarm Code
are trademarks of the National Fire Protection Association (NFPA).