Professional Documents
Culture Documents
Catalogue
2019–2020
edition 2
Index 3
Index 4. Introduction
6. MAFI Product Portfolio
9. Supports and Brackets
29. Radio Brackets
47. Antenna Brackets
61. Wall Mount Solutions
73. Rooftop Solutions
– Fixed
– Free standing
101. Accessories
110. Tables and Guides
116. Package Data
118. MAFI Global Network
119. Table of Content
Your direction
is our goal.
In a world where everyone has to depend on each other,
MAFI wants to make your life easier.
For 28 years our customer relations has been just as important
as the quality of our products. Knowing this, we have
built the worldwide company we are today.
On paper, MAFI is an engineering company that designs,
tests, manufactures and delivers steelwork solutions.
But we go further than that:
We are responsive – we see it as part of our mission
to understand your actual need.
We are discoverers — we are always looking for new
ways to enhance our solutions.
We are reliable — we always deliver on our promises.
Whatever it takes to get you there, we’re always
prepared to go the extra mile; making us your preferred
strategical partner.
Since the beginning of MAFI Group we have been listening best possible solution for our customers, but also to able to
to you - our customers. Your input over the years has been optimize their production and packaging for a more sustainable
invaluable. You know best what problems you want to be life cycle.
solved, often you have indicated a direction, and together we - Logistics and transport
have found effective solutions. We are close and personal, We always strive to source our products close to our
which has significantly contributed to our success. It goes customers making it possible to reduce the need of long-range
without saying that we strive to maintain these contacts transportation and complex logistic setups.
through our expansion. In our partnership with you, our - Facility and work environment
customers, we strive to be more than a supplier. Together we We aim to use renewable energy sources to power our facilities
help each other to create the best solutions. around the world and under the responsibility of the MAFI
Sustainability Board, we continuously challenge ourselves to be
Our business areas, MIS and MSS has proven to be a even more energy efficient.
successful strategy. It gives us excellent opportunities to - Partnerships
approach our customers and raise the level in terms of both As a growing global player, we demand that our subcontractors
product development and service. Now we are refining our and other stakeholders meet the demands we place on
innovation and development processes even more. With new, ourselves; this applies to everything from the Code of Conduct
effective and lean processes we strengthen our way to work in and quality requirements to responsibility for the environment
MIS and MSS. and climate. Simply, paying it forward!
Global presence Innovative and sustainable solutions with fast and accurate
deliveries. Since MAFI Group started, these goals are primarily
The demand for new products and solutions is constantly
guiding our progression. With its rapid growth in recent years,
increasing from our customers and the orders, your orders,
MAFI Group has embarked on an exciting journey. We have
come from all around the world. We have, therefore ensured
high ambitions and great goals, and much will be required of
that we have a global organization that covers all the essential
us all to achieve them. However, I am convinced that we are
competencies needed to continue to satisfy our customers
well prepared to succeed - customers, partners, suppliers and
needs. We want to be close to our customers, to quickly
employees – all together.
respond to local needs, as well as shortening logistics chains
and reducing our carbon footprint. MAFI Group now has offices I look forward too many exciting and fun years together!
in Europe, America, Asia and Africa, still with our headquarter
located in Mora, the heart of Dalarna county.
Sustainability
We feel responsible to measure and continuously reduce Mats Thörnqvist
our global carbon footprint, therefore we have renewed CEO MAFI Group
our sustainability strategy and built it upon four major
cornerstones;
Product, Logistic, Work environment and Partnership.
- Products
When developing new products, we always strive to optimize
design, material use and functionality to be able to offer the
MAFI Product
Portfolio
MAFI MSS
In the MSS segment you will find all kinds of general steel structure products needed to build a reliable and
sustainable telecom site, for example freestanding platforms, support brackets, tubes and accessories. A
product that can fit or host equipment from any telecom equipment manufacturer is an MSS product and
constitutes a standard range. MSS products are stocked in our own and our distributors warehouses ready
for fast deliveries every day.
MAFI MIS
An MIS product is developed as an integrated part of a customer solution or product. That means that
every MAFI MIS product is tailor-made for our customers. MAFI is constantly developing new MIS products
for existing as well as new customers.
8
Products
© 2019–2020 MAFI AB. All rights reserved.
9
Supports
and Brackets
MAFI 43249
Combiclamp Family
Page 26
MAFI 3263*
One-Direction
Offset Family
3263
Flexibility
3273 is the smallest one and offers a maximum offset of
240 mm (9.4 in). 3263 and 3265 are the medium sized ones
and with two different U-bolt kits for a larger range of offset
3273 3272
members. Maximum offset for the 3263 is 420 mm (16.5 in) and
for 3265 with the largest offset member mounted is 397 mm
(15.6 in).
3272 has a maxmimum offset of 797 mm (31.4 in) and
incorporates a double clamp to cope with the high torque loads
imposed by antennas at that large offset. The hole pattern for
3272 is also suitable for option U-bolt kit 2867-1. This enables
offset members to range up to 114.3 mm (4.5 in).
Additional Data
For more detailed product data see sections Bracket Properties,
Rotational Slip Table and Package Data.
Additional information for this product can be found at
Content of kit 3263 Content of kit 3265
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
3263 or E-order number (SEG): 6000667
3265 or E-order number (SEG): 6000668
3272 or E-order number (SEG): 6000665
3273 or E-order number (SEG): 6000666
Contact information can be found at www.mafigroup.com.
©
© 2019–2020
2019–2020 MAFI
MAFI AB.
AB. All
All rights
rights reserved.
reserved.
*Article 3263/3265/3272/3273
*Article 3263/3265/3272/3273 Rev 6 11
Parent member
Measurements in mm (in)
40 × 40 mm–120 × 120 mm
1.6 × 1.6 in–4.7 × 4.7 in
3263/-65
3263/-65/-73:
Ø 25–169 mm
Ø 1–6.7 in
3272 3272:
Ø 48–193 mm
Ø 1.9–15.5 in
40 × 40 mm–120 × 120 mm
1.6 × 1.6 in–4.7 × 4.7 in
3273
Offset member
3263/-72/-73:
Ø 60–76 mm
Ø 2.4–3 in
3265, optional for 3272:
Ø 89–114 mm
Ø 3.5–4.5 in
Ft
Performance
Ultimate transient man-load (Ft): 2.4 kN
MR
Maximum side force (FS) 3263/-65: 1660 N
Fm Maximum side force (FS) 3272: 1750 N
Maximum side force (FS) 3273: 2900 N
Load capacity (Fm) 3263/-65/-73: 120 kg (265 lb)
FS Load capacity (Fm) 3272: 60 kg (132 lb)
Rot. slip resistance (MR): See Rotational Slip Table
Parts list
Product options
2867-1: U-bolt kit for circular members Ø 88.9–114.3 mm ( 3.5–4.5 in). Optional for 3272.
3272 3273 EN 1090
© 2019–2020
© 2019–2020 MAFI
MAFI AB.
AB. All
All rights
rights reserved.
reserved.
12 Rev 7 *Article
*Article 3268/3270
3268/3270
MAFI 3268*
Symmetric
Offset Family
3268
Flexibility
3268 is the smaller one with a maximum offset of 422 mm
(16.6 in) between parent and offset pole. The bigger 3270
has a maximum offset of 850 mm (33.5 in). Maximum offset
between the two offset members are 844 mm (33.2 in) and
1700 mm (66.9 in) respectively.
The hole pattern for 3268 is also suitable for option U-bolt kit
3270
2867-1. This enables offset members to range up to 114.3 mm
(4.5 in).
Additional Data
For more detailed product data see sections Bracket
Properties, Rotational Slip Table and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
3268 or E-order number (SEG): 6000669
3270 or E-order number (SEG): 6000670
Contact information can be found at www.mafigroup.com. Content of kit 3268 Content of kit 3270
Measurements in mm (in)
Performance
Ultimate transient man-load (Ft): 2.4 kN
Maximum side force/bracket (FS): 2000 N
Load capacity (Fm) 3268: 90 kg (198 lb)
Ft Load capacity (Fm) 3270: 60 kg (132 lb)
Rot. slip resistance (MR): See Rotational Slip Table
MR
Fm Fm
FS FS
Parts list
Product options
2867-1: U-bolt kit for circular members Ø 88.9–114.3 mm ( 3.5–4.5 in). Optional for 3268.
3270 EN 1090
©
© 2019–2020
2019–2020 MAFI
MAFI AB.
AB. All
All rights
rights reserved.
reserved.
14 Rev 5
Rev 5 *Article 3610/3613
*Article 3610/3613
MAFI 3610*
Raking Tower
Leg Offset
Family
Flexibility
The raking tower leg offset can carry equipment up to
250 kg (551 lb), offset member included. This can be useful
when radio and antenna equipment is to be preassembled off
site and then lifted and mounted to a tower.
The hole pattern on the 3610 front clamp is designed to allow
oblique installation on angular tower legs.
The bracket arm can be fixed at angles 45° or 60°, to the left
or right, of the parent member. Offset poles for either kit can
range from Ø 60.3–76.1 mm (2.4–3 in). When using the option
2867-1 the range increases up to 114.3 mm (4.5 in).
Additional Data
For more detailed product data see sections Bracket
Properties, Rotational Slip Table and Package Data.
Additional information for this product can be found at Content of kit 3610 Content of kit 3613
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
3610 or E-order number (SEG): 6000676
3613 or E-order number (SEG): 6000677
Contact information can be found at www.mafigroup.com.
rights reserved.
© 2019–2020 MAFI AB. All rights reserved.
*Article 3610/3613 Rev 5
*Article 3610/3613 Rev 5 15
Measurements in mm (in)
3610
Parent member
3610:
60 × 60–120 × 120 mm
2.4 × 2.4–4.7 × 4.7 in
3613:
120 × 120–200 × 200 mm
4.7 × 4.7–7.9 × 7.9 in
3610:
3613 Ø 76.1–139.7 mm
Ø 3–5.5 in
3613:
Ø 139.7–244.5 mm
Ø 5.5–9.6 in
3610:
60 × 60–120 × 120 mm
2.4 × 2.4–4.7 × 4.7 in
3613:
120 × 120–200 × 200 mm
4.7 × 4.7–7.9 × 7.9 in
Ft Offset member
Ø 60.3–76.1 mm
Ø 2.4–3 in
MR Optional:
Ø 88.9–114.3 mm
Ø 3.5–4.5 in
Fm
Performance
Ultimate transient man-load (Ft): 2.4 kN
Maximum side force/offset arm (FS): 4000 N
FS
Load capacity (Fm): 250 kg (551 lb)
Rot. slip resistance (MR): See Rotational Slip Table
Parts list
Product options
MAFI 3611*
Vertical
Tower Leg
Offset Family
Flexibility
The vertical tower leg offset can carry equipment up to
250 kg (551 lb), offset member included. This can be useful
when radio and antenna equipment is to be preassembled off
site to and then lifted and mounted to a tower.
The hole pattern on the 3611/-12 front clamp is designed to
allow oblique installation on angular tower legs.
The bracket arms can be fixed at angles 45° or 60°, to the left
or right, of the parent member. Offset poles for either kit can Content of kit 3611 Content of kit 3612
range from Ø 60.3–76.1 mm (2.4–3 in). When using the option
2867-1 the range increases up to 114.3 mm (4.5 in).
Additional Data
For more detailed product data see sections Bracket
Properties, Rotational Slip Table and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
Content of kit 3614 Content of kit 3615
To order this kit, please contact MAFI quoting article number:
3611 or E-order number (SEG): 6000678
3612 or E-order number (SEG): 6000679
3614 or E-order number (SEG): 6000680
3615 or E-order number (SEG): 6000681
Contact information can be found at www.mafigroup.com.
©
© 2019–2020
2019–2020 MAFI
MAFI AB.
AB. All
All rights
rights reserved.
reserved.
*Article 3611/3612/3614/3615 Rev 5
*Article 3611/3612/3614/3615 Rev 5 17
Measurements in mm (in)
3611
Parent member
3611/-12:
60 × 60–120 × 120 mm
2.4 × 2.4–4.7 × 4.7 in
3612
3614/-15:
120 × 120–200 × 200 mm
4.7 × 4.7–7.9 × 7.9 in
3611/-12:
Ø 76.1–139.7 mm
3614 Ø 3–5.5 in
3614/-15:
Ø 139.7–244.5 mm
Ø 5.5–9.6 in
3611/-12:
3615 60 × 60–120 × 120 mm
2.4 × 2.4–4.7 × 4.7
3614/-15:
120 × 120–200 × 200 mm
4.7 × 4.7–7.9 × 7.9 in
Ft
Offset member
Ø 60–76 mm
Ø 2.4–3 in
MR Optional:
Ø 88.9–114.3 mm
Ø 3.5–4.5 in
Fm
Performance
Ultimate transient man-load (Ft): 2.4 kN
Maximum side force/offset arm (FS): 4000 N
Load capacity (Fm): 250 kg (551 lb)
FS
Rot. slip resistance (MR): See Rotational Slip Table
Parts list
Product options
MAFI 3274
Small Universal
Pole Mount
Flexibility
Can be mounted on a circular or angle member. Offset poles
for equipment can range from Ø 48.3–114.3 mm (1.9–4.5 in).
Additional Data
For more detailed product data see sections Bracket Content of kit
Properties, Rotational Slip Table and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
3274 or E-order number (SEG): 6000688
Contact information can be found at www.mafigroup.com.
©
© 2019–2020
2019–2020 MAFI
MAFI AB.
AB. All
All rights
rights reserved.
reserved.
Article 3274 Rev 4
Parent member
40 × 40–80 × 80 mm
1.6 × 1.6–3.1 × 3.1 in
Ø 25–114.3 mm
Ø 1–4.5 in
Offset member
Ø 48.3–114.3 mm
Ø 1.9–4.5 in
Ft
Performance
Ultimate transient man-load (Ft): 2.4 kN
Maximum side force/bracket (FS): 4000 N
MR FR
Parts list
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
3274 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
MAFI 4418*
3-Sector
Antenna Mount
Flexibility
This 3-sector antenna mount is both flexible and easy to
assemble. 4415 is the smaller one with a maximum c/c offset
of 186 mm (7.3 in) between parent and offset member center. Content of kit 4415
Maximum c/c offset for 4418 is 286 mm (11.3 in).
Additional Data
For more detailed product data see sections Bracket
Properties, Rotational Slip Table and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to order
To order this kit, please contact MAFI quoting article number:
4415 or E-order number (SEG): 6000881
4418 or E-order number (SEG): 6000682
Contact information can be found at www.mafigroup.com. Content of kit 4418
Measurements in mm (in)
4415
Parent member
Ø 76–114.3 mm
Ø 3–4.5 in
Ø 60.3–76.1 mm
Ø 2.4 –3 in
Performance
Ft
Ultimate transient man-load (Ft): 2.4 kN
Maximum side force (FS): 4000 N
Load capacity/offset arm (Fm): 60 kg (132 lb)
Rot. slip resistance (MR): See Rotational Slip Table
Fm MR
FS
Parts list
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. 4415
4418 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
© 2019–2020 MAFI AB. All rights reserved.
22 Rev44
Rev *Article
*Article 5310/5311/5312
5310/5311/5312
MAFI 5310*
Joint
Plate Kit
5310
Flexibility
Fits circular members ranging from Ø 25–60 mm (1–2.4 in)
and square members ranging from 50 × 50–60 × 60 mm
(2 × 2–2.4 × 2.4 in).
See 5320/5321 for larger kits.
Additional Data
For more detailed product data see sections Bracket
Content of kit 5310
Properties and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
5310 or E-order number (SEG): 6000671
5311 or E-order number (SEG): 6000672
5312 or E-order number (SEG): 6000673
Contact information can be found at www.mafigroup.com. Content of kit 5311 Content of kit 5312
Measurements in mm (in)
5310/-11/-12 5310
Parent member
5310:
Ø 25–35 mm
Ø 1–1.4 in
5311:
Ø 35–60 mm
Ø 1.4– 2.4 in
5312:
50 × 50–60 × 60 mm
2 × 2–2.4 × 2.4 in
5311 5312
Offset member
50 × 50–60 × 60 mm
2 × 2–2.4 × 2.4 in
Performance
Fm
Parts list
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
MAFI 5320*
Crossover Kit
5320
Flexibility
5320 fits circular members of Ø 76.1 mm (3 in) and square
members ranging from 50 × 50–60 × 60 mm (2 × 2–2.4 × 2.4 in).
5321 fits circular members of Ø 114.3 mm (4.5 in) and square
members ranging from 50 × 50–60 × 60 mm (2 × 2–2.4 × 2.4 in).
See 5310/5311/5312 for smaller kits.
5321
Additional Data
For more detailed product data see sections Bracket Properties,
Rotational Slip Table and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
5320 or E-order number (SEG): 6000674
5321 or E-order number (SEG): 6000675
Contact information can be found at www.mafigroup.com.
Measurements in mm (in)
5320 5321
Parent member
50 × 50–60 × 60 mm
2 × 2–2.4 × 2.4 in
Offset member
5320:
Ø 76.1 mm
Ø 3 in
5321:
Ø 114.3 mm
Ø 4.5 in
Performance
Maximum side force (FS): 3875 N
Load capacity/joint (Fm): 100 kg (220 lb)
Rot. slip resistance (MR): See Rotational Slip Table
FR
FS MR
Fm
Parts list
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
5321 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
MAFI 43249*
Combiclamp
Family
43246 43247
43248 43249
Flexibility
43246 connects one circular member of Ø 60.3 mm (2.4 in)
to another circular member of Ø 48.3 mm (1.9 in).
43247 connects two circular members of Ø 76.1 mm (3 in).
43248 connects one circular member of Ø 114.3 mm (4.5 in)
to another circular member of Ø 76.1 mm (3 in).
43249 connects two circular members of Ø 114.3 mm (4.5 in).
The products are delivered with all necessary fasteners.
How to Order
To order this kit, please contact MAFI quoting article number:
43246
43247
43248
43249
Content of kit 43248 Content of kit 43249
Contact information can be found at www.mafigroup.com.
Measurements in mm (in)
43246 43247
Parent/offset member
43246:
Ø 60.3 mm
Ø 2.4 in
Ø 48.3 mm
Ø 1.9 in
43247:
43248 43249 Ø 76.1 mm
Ø 3 in
43248:
Ø 114.3 mm
Ø 4.5 in
Ø 76.1 mm
Ø 3 in
43249:
Ø 114.3 mm
Ø 4.5 in
Performance
Maximum side force (FS): 2000 N
Load capacity (Fm): 200 kg (441 lb)
Maximum axial moment (Ma) 43246: 150 Nm
Ma
Maximum axial moment (Ma) 43247: 350 Nm
FS Maximum axial moment (Ma) 43248: 350 Nm
Maximum axial moment (Ma) 43249: 1000 Nm
Rot. slip resistance (MR): See Rotational Slip Table
Fm
FR
MR
Parts list
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Radio
Brackets
MAFI 5110
Radio Support
Flexibility
The support is delivered as a flat pack and can easily
be mounted on cable trays of width 200–500 mm (7.9–19.7 in).
Self-tapping screws and fasteners are included.
Option 5111 allows mounting directly on surfaces such as roof Content of kit 5110
tops or other solid platforms.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number: Content of option kit 5111
Measurements in mm (in)
Parent structure
Width of cable tray:
200–500 mm
7.9–19.7 in
Parts list
Product options
91103: Adaptor plate for Nokia RRH.
5110
© 2019–2020 MAFI AB. All rights reserved.
Multi ERS
60 × 60–80 × 80 mm
2.4 × 2.4–3.1 × 3.1 in
Bracket XL Ø 55–114.3 mm
Ø 2.2–4.5 in
50 × 50–80 × 80 mm
2 × 2–3.1 × 3.1 in
Performance
Flexibility
This bracket can be mounted on either circular, angular or box
Fm Fm
beam members, as well as on to a wall. The hole pattern for
equipment is c/c 30 mm (1.2 in) or c/c 80 mm (3.1 in). The
bracket allows a mix of ERS units to be mounted. Bolts for
attaching up to four ERS units are included.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code.
How to Order
To order this kit, please contact MAFI quoting article number: Measurements in mm (in)
6029
Contact information can be found at www.mafigroup.com.
Parts list
Product options
91139: Bolt kit. 4 pcs M8 x 20 mm (0.8 in) stainless steel A4 with captive washers.
6029
©2019–2020
© 2019–2020MAFI
MAFIAB.
AB.All
Allrights
rights reserved.
reserved.
Article 6030 Rev 1 Rev 1 Article 603033
Dual ERS
60 × 60–80 × 80 mm
2.4 × 2.4–3.1 × 3.1 in
Bracket Ø 55–114.3 mm
Ø 2.2–4.5 in
50 × 50–80 × 80 mm
2 × 2–3.1 × 3.1 in
Performance
Fm Fm
Bracket for attaching two standard or Heavy ERS units.
Flexibility
This bracket can be mounted on either circular, angular or box
beam members, as well as on to a wall. The hole pattern for
equipment is c/c 30 mm (1.2 in) or c/c 80 mm (3.1 in). The
bracket also allows a mix of RRU and filter/PSU.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code.
Measurements in mm (in)
How to Order
To order this kit, please contact MAFI quoting article number:
6030
Contact information can be found at www.mafigroup.com.
Parts list
Product options
91139: Bolt kit. 4 pcs M8 x 20 mm (0.8 in) stainless steel A4 with captive washers.
6030
© 2019–2020 MAFI AB. All rights reserved.
© 2019–2020 MAFI AB. All rights reserved.
34 Rev
Rev3 3 Article 1234
Article 1234
MAFI 1234
Remote Radio
Adaptor Plate
Flexibility
The adaptor plate can be mounted on MAFI products:
4010, 4015, 4019-family, 4020, 4036-family and 5110, or on
similar brackets with same footprint.
Additional data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
1234 or E-order number (SEG): 6000825 Content of kit
Product fit
4010 4015
4019-2 4019-3
4019-4 4020
4036 5110
Performance
Load capacity (Fm): 35 kg (77.2 lb)
Fm
Parts list
Bolt M8 A4 8
Washer M8 A4 8
Locking Nut M4 A4 4
Washer M4 A4 4
1234
©2019–2020
© 2019–2020MAFI
MAFIAB.
AB.All
Allrights
rightsreserved.
reserved.
36 Rev
Rev 22 Article 1236
PSU Adaptor
Load capacity (Fm): 8 kg (17.6 lb)
Plate
Fm
Measurements in mm (in)
Flexibility
This adaptor plate can be mounted on a unit with horizontal
hole pattern of c/c 226 mm (8.9 in). Fitting equipment
horizontal hole pattern is c/c 146 mm (5.75 in).
Additional data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code. Content of kit
How to Order
To order this kit, please contact MAFI quoting article number:
1236
Contact information can be found at www.mafigroup.com.
Parts list
Plate S355MC 2
Fasteners A4 Incl.
1236
© 2019–2020
© 2019–2020 MAFI
MAFI AB.
AB. All
All rights reserved.
Article 1237 Rev 2 Rev 2 Article 1237
37
Bracket
Performance
FBookshelf FPortrait
Plate for mounting a single ERS, PSU or filter unit to a C-rail.
Flexibility
This plate can be used for units with a vertical c/c of 110 mm
(4.33 in) and horizontal c/c of 30 mm (1.18 in). For units with
greater horizontal c/c, use two plates. Easy installation due to
the hooking feature on the back side of the plate.
Additional data
For package data see section Package Data.
Additional information for this product can be found at
Measurements in mm (in)
www.mafigroup.com, or use the QR-code.
How to Order
To order this kit, please contact MAFI quoting article number:
1237
Contact information can be found at www.mafigroup.com
Parts list
Plate S420MC/HC420LA 1
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
38
50 × 50–80 × 80 mm
2 x 2–3.2 x 3.2 in
Performance
FS
Flexibility Fm
This bracket can be mounted on either circular, angular or box
beam members, as well as on to a wall. The included steel
band plate also allows mounting on utility poles. Azimuth is
adjustable ±30° and downtilt up to 45°.
Additional data
Pole mount 0° Wall mount 45° Pole mount 45°
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code.
Parts list
Clamp S355MC 2
MAFI 1242
Universal
Remote Radio
Bracket
Flexibility
The Universal Remote Radio Bracket is developed to accomodate
remote radio units by Ericsson, Huawei and Nokia. See equipment
hole patterns on next page for c/c measurements, and also
functional layout for attaching to C-rail system. For equipment with a
horizontal c/c wider than 80 mm (3.15 in) an extra bracket is needed.
The key hole pattern on the bracket makes it easy to mount, and all
necessary bolts and channel nuts are included in the kit.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
1242
Contact information can be found at www.mafigroup.com.
Content of kit
Measurements in mm (in)
Parent member
Performance
Load capacity (Fm): 50 kg (110 lb)
Maximum side force (FS): 540 N
FS
Fm
Parts list
Product options
91139: Bolt kit. 4 pcs M8 x 20 mm (0.8 in) stainless steel A4 with captive washers.
1242
© 2019–2020 MAFI AB. All rights reserved.
MAFI 4019*
RRU Mount
Family
4019-4
4019-3
Flexibility
The products can be mounted on circular, square or angular
members. Single RRU mount 4020 can also be used for wall
mounting. Fits any equipment with horizontal c/c 146 mm (5.75 in).
4019-2
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
4019-2 or E-order number (SEG): 6000684
4019-3 or E-order number (SEG): 6000685
4019-4 or E-order number (SEG): 6000686
4020 or E-order number (SEG): 6000683
Contact information can be found at www.mafigroup.com. 4020
©©2019–2020
2019–2020MAFI
MAFIAB.
AB.All
Allrights
rightsreserved.
reserved.
*Article 4019-2/4019-3/4019-4/4020 Rev5 5
Rev 43
Parent member
4019-3/-4:
40 × 40–80 × 80 mm
1.6 × 1.6–3.1 × 3.1 in
4020:
35 × 35–80 × 80 mm
1.4 × 1.4–3.1 × 3.1 in
4019-2:
Ø 40–114 mm
Ø 1.6–4.5 in
4019-3/-4/4020:
Ø 25–114 mm
Ø 1–4.5 in
Content of kit 4019-2 Content of kit 4019-3
4019-2/-3/-4:
40 x 40–80 x 80 mm
1.6 × 1.6–3.1 × 3.1 in
4020:
35 × 35–80 x 80 mm
1.4 × 1.4–3.1 × 3.1 in
Ft
Performance
Ultimate transient man-load (Ft): 2.4 kN
Load capacity (Fm) 4019-2: 2 x 35 kg (2 x 77 lb)
Load capacity (Fm) 4019-3: 3 x 35 kg (2 x 77 lb)
Load capacity (Fm) 4019-4: 4 x 35 kg (2 x 77 lb)
Load capacity (Fm) 4020: 1 x 40 kg (1 x 88 lb)
Fm Fm
Fm Fm
Parts list
MAFI 4036*
Single/Dual
RRU Support
Flexibility
The support can be mounted on circular, square or angular
members, with or without a PSU or A2/A3 attached to the 4037
backside of the RRU. The support is manufactured of high
quality steel with hot dip galvanization treatment. Fits any
equipment with horizontal c/c 146 mm (5.75 in).
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
4036 or E-order number (SEG): 6000826
4037 or E-order number (SEG): 6000827
Contact information can be found at www.mafigroup.com. Content of kit 4036 Content of kit 4037
Measurements in mm (in)
Parent member
35 × 35–80 × 80 mm
1.4 × 1.4–3.1 × 3.1 in
Ø 35–114 mm
Ø 1.4–4.5 in
35 × 35–80 × 80 mm
1.4 × 1.4–3.1 × 3.1 in
Performance
Fm
Parts list
Antenna
Brackets
MAFI 3058
GPS Mount
Flexibility
Tilting possibility
The support is designed with slotted holes on the back clamp
for easy pre-assembling on ground. Tiltable up to 10°.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
3058 or E-order number (SEG): 6956996
Contact information can be found at www.mafigroup.com.
Content of kit
Measurements in mm (in)
Parent member
35 × 35–80 × 80 mm
1.4 × 1.4–3.2 × 3.2 in
Ø 25–114 mm
Ø 1–4.5 in
35 × 35–80 × 80 mm
1.4 × 1.4–3.2 × 3.2 in
Performance
Fm
Parts list
3058
© 2019–2020 MAFI AB. All rights reserved.
MAFI 3115*
Antenna
Offset
Flexibility
The offset bracket can handle a wide range of tower
and mast leg sections. The bracket fits either directly
against the antenna or tilt brackets if used. Hole pattern for
equipment is c/c 32–72 mm (1.26–2.83 in).
The optional 31154 antenna adaptor kit allows mounting of
3115 with option 31154,
antennas with c/c 150 mm (5.9 in) in the vertical plane
antenna adaptor kit
Additional Data
For more detailed product data see sections Rotational Slip
Table and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
3115 or E-order number (SEG): 6062514
Content of kit 3115
3116 or E-order number (SEG): 6000951
31154 or E-order number (SEG): 6000883
Content of kit 3116
Contact information can be found at www.mafigroup.com
Measurements in mm (in)
3115
Parent member
Ø 25–76.1 mm
Ø 1–3 in
Performance
3116
Ultimate transient man-load (Ft): 2.4 kN
Load capacity (Fm) 3115/-16: 50 kg (110.2 lb)
Rot. slip resistance (MR): See Rotational Slip Table
Ft
31154
MR
Fm
Parts list
Product options
31154: Antenna adaptor kit. Optional for both 3115 and 3116.
MAFI 3117
Antenna
Offset Large
Flexibility
This larger version of antenna offset can handle a wide range
of tower and mast leg section. The brackets hole pattern fits
either directly against the antenna or tilt brackets if used.
The antenna offset large is suitabel for larger and heavier
antennas with a c/c between 32–72 mm (1.26–2.83 in).
The optional 31154 antenna adaptor kit allows mounting of 3117 with option 31154,
antennas with c/c 150 mm (5.9 in) in the vertical plane. antenna adaptor kit
Additional Data
For more detailed product data see sections Rotational Slip
Table and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
3117 or E-order number (SEG): 6001003
31154 or E-order number (SEG): 6000883
Contact information can be found at www.mafigroup.com.
3117
Content of kit
Measurements in mm (in)
3117
Parent member
Ø 42.3–114.3 mm
Ø 1.7–4.5 in
Performance
Ft
MR
Fm
Parts list
Product options
3117
© 2019–2020 MAFI AB. All rights reserved.
Flexibility
These brackets can be mounted on either circular, angular or
box beam members, as well as on to a wall. With the option
91133 it is also possible to mount on a utility pole. Both
brackets provide ± 30° azimuth adjustment and the 5012 also
provide tilting of the unit ± 30°.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
5012
5013
Contact information can be found at www.mafigroup.com.
©©2019–2020
2019–2020MAFI
MAFIAB.
AB.All
Allrights
rightsreserved.
reserved.
Article 5012/5013 Rev 2
Article MAFI 5012/5013 Rev 2 55
Measurements in mm (in)
Parent member
5012
50 × 50–80 × 80 mm
2 x 2–3.1 x 3.1 in
Ø 76.1–114.3 mm
Ø 3–4.5 in
50 × 50–80 × 80 mm
2 x 2–3.1 x 3.1 in
Performance
Fm
FS
Parts list
Product options
Flexibility
These brackets can be mounted on either circular, angular or
box beam members, as well as on to a wall. Both brackets
provide ± 30° azimuth adjustment and the 5022 also provide
tilting of the unit ± 20°.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
5022
5023
Contact information can be found at www.mafigroup.com.
Measurements in mm (in)
Parent member
5022
50 × 50–80 × 80 mm
2 x 2–3.1 x 3.1 in
Ø 76.1–114.3 mm
Ø 3–4.5 in
50 × 50–80 × 80 mm
2 x 2–3.1 x 3.1 in
Performance
Fm
FS
Parts list
5022 5023
© 2019–2020 MAFI AB. All rights reserved.
© 2019–2020 MAFI AB. All rights reserved.
58 Rev22
Rev Article 5030/5031
Article 5030/5031
Flexibility
These brackets can be mounted on either circular, angular or
box beam members, as well as on to a wall. Both brackets
provide ± 30° azimuth adjustment and the 5030 also provide
tilting of the unit ± 20°.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
5030
5031
Contact information can be found at www.mafigroup.com.
© 2019–2020
© 2019–2020 MAFI
MAFI AB.AB. All rights
All rights reserved.
reserved.
Article 5030/5031 Rev 2
Article 5030/5031 Rev 2 59
Measurements in mm (in)
Parent member
5030
50 × 50–100 × 100 mm
2 x 2–4 x 4 in
Ø 76.1–120 mm
Ø 3–4.7 in
50 × 50–100 × 100 mm
2 x 2–4 x 4 in
Performance
Fm
Parts list FS
Part Material Quantity 5030 Quantity 5031
5030 5031
© 2019–2020 MAFI AB. All rights reserved.
© 2019–2020 MAFI AB. All rights reserved.
60
Wall Mount
Solutions
MAFI 3541
Medium
Duty Wall
Mount
Flexibility
The product can be mounted either directly to brick
or concrete walls, or using through-mounts with back plates.
Equipment poles can range from Ø 60–114.3 mm (2.4–4.5 in).
Additional Data
For more detailed product data see sections Wall Bracket
Properties, Rotational Slip Table and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
3541 or E-order number (SEG): 6062659
Content of kit
Contact information can be found at www.mafigroup.com.
Measurements in mm (in)
Offset member
Ø 60–114.3 mm
Ø 2.4–4.5 in
Performance
Ft
Fm
MR
FS
Parts list
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
3541 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
MAFI 3544
Large Offset
Wall Mount
Flexibility
The product can be mounted either directly to brick or concrete
walls, or using through-mounts with back plates.
Equipment poles can range from Ø 60–114.3 mm (2.4–4.5 in).
Additional Data
For more detailed product data see sections Wall Bracket
Properties, Rotational Slip Table and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
3544 or E-order number (SEG): 6062518
Contact information can be found at www.mafigroup.com.
Content of kit
Measurements in mm (in)
Offset member
Ø 60–114.3 mm
Ø 2.4–4.5 in
Performance
Ft
Fm
FS
MR
Parts list
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
3544 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
© 2019–2020 MAFI AB. All rights reserved.
66 Rev5 5
Rev Article
Article 2414
2414
MAFI 2414
Heavy Duty
Wall Mount
Flexibility
The product can be mounted either directly to brick
or concrete wall, or using through-mounts with reinforcement
on the back. Equipment poles can range from Ø 101.6–114.3
mm (4–4.5 in).
Additional Data
For more detailed product data see sections Wall Bracket
Properties, Rotational Slip Table and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
2414 or E-order number (SEG): 6000693
Content of kit
Contact information can be found at www.mafigroup.com
Measurements in mm (in)
Offset member
Ø 101.6–114.3 mm
Ø 4–4.5 in
Performance
Ft
Fm
MR
Fm
Ft
FS
Configuration 1 Configuration 2
Parts list
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
2414 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
© 2019–2020 MAFI AB. All rights reserved.
68 Rev4 4
Rev Article
Article 43692
43692
MAFI 43692
Corner Wall
Mount
Flexibility
The product can be mounted either directly to brick or concrete
walls, or using though-mounts with back plates.
Equipment poles can range from Ø 60–114.3 mm (2.4–4.5 in).
Additional Data
For more detailed product data see sections Wall Bracket
Properties, Rotational Slip Table and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
43692 or E-order number (SEG): 6000694
Contact information can be found at www.mafigroup.com.
Content of kit
Measurements in mm (in)
Offset member
Ø 60–114.3 mm
Ø 2.4–4.5 in
Performance
Ft
Fm
FS
MR
Parts list
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
43692 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
MAFI 8057
Wall
Mounted
Cabinet
Platform
Flexibility
The elongated slots and slidable cross beams allows to create
the required hole pattern for any cabinet.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order kit, please contact MAFI quoting article number:
8057
Contact information can be found at www.mafigroup.com. Content of kit
Measurements in mm (in)
Performance
Parts list
8057
© 2019–2020 MAFI AB. All rights reserved.
© 2019–2020 MAFI AB. All rights reserved.
72
Rooftop
Solutions
Fixed
Free
Stander
MAFI 2230*
Adjustable
Strut Family
Flexibility
The 2230-family comprises three lengths of struts and two
standard sizes of pole attachment clamps available
to fit poles with Ø 76.1 or 114.3 mm (3 in or 4.5 in).
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
2230 or E-order number (SEG): 6000865
2231 or E-order number (SEG): 6000866
2232 or E-order number (SEG): 6000867
2233 or E-order number (SEG): 6000868
2234 or E-order number (SEG): 6000869 Option: 4328 Content of kit
2235 or E-order number (SEG): 6000870
Contact information can be found at www.mafigroup.com.
© 2019–2020
2019–2020 MAFI
MAFI AB.
AB. All
All rights
rights reserved.
reserved.
*Article 2230/2231/2232/2233/2234/2235 Rev3 3
Rev 75
Parent member
Measurements in mm (in)
2230/-31/-32:
Option 4328 Ø 76.1 mm
Ø 3 in
2233/-34/-35:
Ø 114.3 mm
Ø 4.5 in
Optional Ø 76.1 mm (3 in)
Performance
Load capacity Ø 76.1 (3 in):
Fstrut: 10 000 N
Included Foot Load capacity Ø 114.3 (4.5 in):
Fstrut: 15 000 N
Strut length
and clamp width
Clamp width
Product X Length m (ft)
Ø mm (in)
Parts list
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Top view
How to calculate
For an evenly distributed load the recommended angle
between struts is 90° as shown in the "Top view" picture.
The recommended angle between strut and parent
member is 45° as shown in the "Side view" picture.
b = 3.11
The needed strut length is 3.11 meter, which means 2232
or 2235 depending on parent member diameter.
b
a=—
√2
a b
b = √(2*a2)
© 2019–2020
2019–2020 MAFI
MAFI AB.
AB. All
All rights
rights reserved.
reserved.
77
MAFI 3022
Adaptor beams
Flexibility
The adaptor beams can be mounted either with clamps around
existing structural beams, or with spacers and washers on the
top flange when there is no space underneath the structural
beams. Requires no drilling or welding on site.
Overturning resistance
For these adaptor beams the critical dimensioning parameter Option 4316 Enclosure mounted with washers
is the resistance torque and reaction forces when ultimate
wind loads are acting on the equipment. Both load cases must
be considered when dimensioning equipment, and these limits
may not be exceeded.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
3022
Contact information can be found at www.mafigroup.com. Content of kit
© 2019–2020
2019–2020 MAFI
MAFI AB.
AB. All
All rights
rights reserved.
reserved.
Article 3022 Rev33
Rev 79
Clamp
Bottom flange
Fwind
Fwind
FR FR
FR FR
MR MR
Parts list
Product options
4316: Single pole 1.8 m (3.3 ft) with foot.
3022 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
80 Rev 4 Article 3510
Article 3510
MAFI 3510
Rafter
Bracket Kit
Flexibility
The product can be mounted directly on to the wooden
structure using through-mounts with large square washers on
the back. The kit consist of high quality steel parts with hot dip
galvanization treatment.
Additional Data
For more detailed product data see sections Rotational Slip
Table and Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
3510 or E-order number (SEG): 6000882
4328 Option Content of kit
Contact information can be found at www.mafigroup.com.
©
© 2019–2020
2019–2020 MAFI
MAFI AB.
AB. All
All rights
rights reserved.
reserved.
Article 3510 Rev 4
Measurements in mm (in)
Parent member
Wooden beams minimum:
120 × 45 mm
FWind 4.7 × 1.8 in.
Offset member
Ø 60.3–114.3 mm
Ø 2.4–4.5 in
Performance
Ft
Ultimate transient man-load (Ft): 2.4 kN
Maximum side force (FS): 10 000 N
Load capacity (Fm): 300 kg (661 lb)
FS Rot. slip resistance (MR): See Rotational Slip Table
Fm
MR
FS
Parts list
Threaded rod M8 A4 14
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
3510 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
MAFI 4316
Single Pole
Flexibility
The kit consists of a single 1.8 meter (5.9 ft) pole with a
diameter of 76.1 mm (3 in), fasteners and a foot.
Foot and pole assembly can be mounted on adaptor beams or a
free stander allowing for secure mounting of equipment on, for
example, a roof top. When mounted on the free stander 4310 the
equipment pole is tiltable up to 6° for vertical alignment.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
4316 Mounted on 3022 Mounted on 4310
©
© 2019–2020
2019–2020 MAFI
MAFI AB.
AB. All
All rights
rights reserved.
reserved.
Article 4316 Rev 3
Measurements in mm (in)
FWind
Performance
Fm
MO
Parts list
Product options
4316 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
MAFI 4120
Roof Butler
Flexibility
The Roof Butler is horizontally adjustable up to 6°, so that the
pole will always be vertical.
Overturning moment
For this free standing structure, the critical dimensioning
parameter is the ability to resist overturning moment. Wind
forces, dimensions and equipment weight must be taken into
consideration when designing.
This free standing structure must be equipped with a minimum
ballast weight of 25 kg (55.1 lb).
All equipment must always be placed as evenly distributed as
possible.
A stability calculation should be done in every case
– If you need help, please contact MAFI.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
©
© 2019–2020
2019–2020 MAFI
MAFI AB.
AB. All
All rights
rights reserved.
reserved.
Article 4120 Rev 1
Article 4120 Rev 1 85
Measurements in mm (in)
Parent member
Ø 76.1 mm
Ø 3 in
Performance
Load capacity (Fm)*: 240 kg (529 lb)
(Exluding roof butler weight)
Maximum overturning moment (MO): 800 Nm
(Including roof butler weight)
Lever arm for overturning moment calculation:
0.32 m (1.05 ft)
Maximum tilt: 6°
FWind
Fm
Parts list
Product options
4120
© 2019–2020 MAFI AB. All rights reserved.
© 2019–2020 MAFI AB. All rights reserved.
86 Rev 4 *Article 4112/41121
*Article 4112/41121
MAFI 4112*
Free Stander
Light
Flexibility
The pole on the free stander light is horizontally adjustable up
to 6°, so that the pole will always be vertical.
Overturning moment
For this free standing structure, the critical dimensioning
parameter is the ability to resist overturning moment. The
figure stated in "Performance" on the next page must be higher
than the moment applied by the ultimate wind loads acting on
the pole and the supported equipment. A stability calculation
should be done in every case - if you need help, please contact
MAFI.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
4112 or E-order number (SEG): 6062548
41121 or E-order number (SEG): 6062641
Contact information can be found at www.mafigroup.com. Content of kit 4112 Content of kit 41121
© 2019–2020
2019–2020 MAFI
MAFI AB.
AB. All
All rights
rights reserved.
reserved.
*Article 4112/41121 Rev 4
Measurements in mm (in)
Parent member
Ø 60.3 mm
Ø 2.4 in
Performance
MO
Parts list
41121
© 2019–2020 MAFI AB. All rights reserved.
MAFI 4309*
Free Stander
Medium
Flexibility
This structure provides mounting opportunity without
penetrating weatherproofing layers on rooftops. The ballast in
the structure can be varied to suit the wind load and there’s a 4309 with 1 layer option 42071
lot of space for mounting equipment.
The equipment pole is horizontally adjustable up to 6° so that it
always can be kept vertical.
Overturning moment
For this free standing structure the critical dimensioning
parameter is the ability to resist overturning moment.
The figures stated in "Performance" on the next page must be
higher than the moment applied by the ultimate wind loads
acting on the pole and the supported equipment.
The roof structure should to be checked by an engineer
to confirm that it can withstand the total weight of the
structure. Also it should be confirmed that the friction
between the free stander's rubber mat and the roof is enough
to prevent sliding. Content of kit 43091
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
4309 or E-order number (SEG): 6062564
43091
43092 or E-order number (SEG): 6062656
Contact information can be found at www.mafigroup.com. Content of kit 43092 Content of kit 4309
Measurements in mm (in)
Performance
4309 4309/-1/-2
Tube thickness: 2.9 mm (0.1 in)
Maximum tilt: 6°
Maximum overturning moment (MO) with 4
concrete blocks*: 1000 Nm
Maximum overturning moment (MO) with 8
concrete blocks*: 1600 Nm
FWind
43091
Parts list
Quantity Quantity Quantity
Part Material
4309 43091 43092
Pocket S355MC HDG 4 4 4
Product options
4309
42071: Concrete block to increase ballast weight.
MAFI 4310
Free Stander
Platform
Flexibility
The ballast in the structure can be varied to suit the wind load
and there is plenty of space for mounting equipment.
Cross pattern is designed for option 4316. When used together
the equipment pole is horizontally adjustable up to 6° for a
vertical alignment.
Overturning moment
For this free standing structure the critical dimensioning
parameter is the ability to resist overturning.
The figures stated in "Performance" on the next page must be
higher than the moment applied by the ultimate wind loads
acting on the equipped free stander.
The roof structure should to be checked by an engineer
to confirm that it can withstand the total weight of the
structure. Also it should be confirmed that the friction
between the free stander's rubber mat and the roof is enough Option 4316
to prevent sliding.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting Content of kit
article number: 4310
Contact information can be found at www.mafigroup.com.
Measurements in mm (in)
Performance
Maximum tilt: 6°
Maximum overturning moment (MO) with 4
concrete blocks*: 870 Nm
Maximum overturning moment (MO) with 8
concrete blocks*: 1470 Nm
FWind
MO
Parts list
Product options
4310 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
4600*
Free Standing
Corner Mount
Flexibility
The structure is designed to support equipment-carrying
tubes using ballast as counter weight. This provides mounting
Option 91124
opportunity without penetrating weatherproofing layers on
rooftops. Adjustable ballast-carrying cross beams make
it possible to account for different sizes of concrete blocks
depending on availability. The interface between the frame and
the equipment pole is a cone-shaped folded steel sheet that
provides a three-point contact even when tilting so that the
pole can be kept vertical if the surface is sloping.
Additional Data
For package data see section Package Data.
Content of kit 4600
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
4600 or E-order number (SEG): 6000689
4601 or E-order number (SEG): 6000690
4602 or E-order number (SEG): 6000691
Contact information can be found at www.mafigroup.com.
©
© 2019–2020
2019–2020 MAFI
MAFI AB.
AB. All
All rights
rightsreserved.
reserved.
*Article 4600/4601/4602 Rev 5
Measurements in mm (in)
4600
Parent member
Ø 76.1 mm
Ø 3 in
Option 91125:
Ø 114.3 mm
Ø 4.5 in
4600:
Half ballast: 4 pcs 42071
Full ballast: 8 pcs 42071
Maximum ballast weight: 224 kg (494 lb)
4601:
Half ballast: 9 pcs 42071
Full ballast: 18 pcs 42071
Maximum ballast weight: 504 kg (1111 lb)
4602:
4601 4602 Half ballast: 16 pcs 42071
Full ballast: 32 pcs 42071
Maximum ballast weight: 896 kg (1975 lb)
Parts list
Product options
91124: Additional strut for yoke arms to be attached to Ø 76.1 mm (3 in) tube.
91125: Clamp set for Ø 114.3 mm (4.5 in) tube. 3 clamps with U-bolts included.
4600
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
FWind
Overturning moment
For this family of freestanding structures the critical
dimensioning parameter is the ability to resist overturning.
The figures in the overturning moment table need to be higher
than the moment applied by the design wind loads
(i.e ultimate load including load factors) acting on the pole
and the supported equipment.
The roof structure should be checked by an engineer to confirm
that it can withstand the total weight of the structure. Also it
should be confirmed that the friction between the product´s
rubber mat and the roof is enough to prevent sliding.
Custom calculations
For custom calculations regarding design resistance
for overturning, use the formula and the table below.
The maximum allowed ballast stated on previous page and
overturning moment in table below is not to be exceeded.
MO = (Ballast weight* + Product weight) × 9.81 × Lever arm
MO
Lever arm Product weight Max overturning
Product
m (ft) kg (lb) moment MO (Nm)
MAFI 91110
Extra
Pole Kit
Flexibility
Kit for mounting an extra 76.1 mm (3 in) tube to 4601 or 4602.
The recommended maximum length of tube is 1.5 m (4.9 ft).
Easily mounted when assembling the Free Standing Corner
Mount or added onto already built structures.
Overturning moment
All restistance data accoring to platform 4601
or 4602.
Additional Data
For package data see section Package Data. 91110 mounted on
Additional information for this product can be found at 4602
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
91110
Contact information can be found at www.mafigroup.com. Content of kit
Parent member
Ø 76.1 mm
Ø 3 in
Parts list
Product options
Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
91110 EN 1090
© 2019–2020 MAFI AB. All rights reserved.
© 2019–2020 MAFI AB. All rights reserved.
98 Rev 3 *Article 8051/91100/91101
8051/91100/91101
MAFI 8051*
Small
Adjustable
Cabinet
MAFI 8051
Platform
MAFI 91100
Flexibility
The elongated slots and slidable cross beams allow you to
create the hole pattern you need for any cabinet. MAFI 91101
Overturning moment
For this family of freestanding platforms the critical
dimensioning parameter is the ability to resist overturning.
Wind forces, dimensions and weights of the cabinets must be
taken into consideration when designing a platform solution.
A stability calculation should be done in every case
– If you need help, please contact MAFI.
The roof structure should be checked by an engineer to confirm
that it can withstand the total weight of the structure. Also it
should be confirmed that the friction between the product´s
rubber mat and the roof is enough to prevent sliding.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order kit, please contact MAFI quoting article number:
8051 or E-order number (SEG): 6000692
91100
91101
Contact information can be found at www.mafigroup.com.
© 2019–2020 MAFI AB. All rights
rights reserved.
reserved.
*Article 8051/91100/91101 Rev 3
Measurements in mm (in)
Performance
91100
91101
Fm Fm
FWind
MO
Parts list
Product options
Accessories
MAFI 32655*
Cable Holder
Family
Flexibility
The different models in the family can accommodate tubular 32655/-57/-58
tower-legs ranging from Ø 20–193 mm (0.8–7.6 in), and angle
legs from 60 × 60–130 × 130 mm (2.4 × 2.4–5.1 × 5.1 in).
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-codes on next page.
How to Order
To order this kit, please contact MAFI quoting article number: 32660/-63
32664
Measurements in mm (in)
32655/-57/-58
Parent member
32664:
60 × 60 mm–130 × 130 mm
2.4 × 2.4 in–5.1 × 5.1 in
32655:
Ø 20–50 mm
Ø 0.8–2 in
32657:
Ø 40–76.1 mm
Ø 1.6–3 in
32658:
32660/-63/-64 Ø 88.9–114.3 mm
Ø 3.5–4.5 in
32660:
Ø 35–76.1 mm
Ø 1.4–3 in
32663:
Ø 88.9–114.3 mm
Ø 3.5–4.5 in
32664:
Ø 76.1–193 mm
Ø 3–7.6 in
Parts list
Quantity Quantity
Part Material
32655/57/58/60/63 32664
32660/-63 32664
© 2019–2020 MAFI AB. All rights reserved.
MAFI 7000
Stainless
Steel 10-hole
Groundbar
Flexibility
The groundbar can easily be fitted to round members from
Ø 42–76.1 mm (1.7–3 in) or angle members up to 50 × 50 mm
(2 × 2 in). It can also be readily attached to cable ladder,
cable tray and C-channel members.
Additional Data
For package data see section Package Data.
Additional information for this product can be found at
www.mafigroup.com, or use the QR-code on next page.
How to Order
To order this kit, please contact MAFI quoting article number:
7000 or E-order number (SEG): 6062665
Contact information can be found at www.mafigroup.com.
©
© 2019–2020
2019–2020MAFI
MAFIAB.
AB.All
Allrights
rightsreserved.
reserved.
Article 7000 Rev 4
Measurements in mm (in)
Parent member
Ø 42–76.1 mm
Ø 1.7–3 in
Up to 50 x 50 mm
Up to 2 x 2 in
Parts list
Plate A2 1
U-bolt A4 1
Bolt M8/M6 A2 12
Nut M8 A2 10
Washer M8/M6 A2 34
7000
© 2019–2020 MAFI AB. All rights reserved.
Tubes and
Beams
Article no. Wall thickness Weight Article no. corresponding to available length
Outer Ø mm (in)
(Circular profile) mm (in) (kg per m) (ex. 2000 mm length corresponds to -20)
GT60329-XX 60.3 (2.4) 2.90 (0.11) 4.11 -10, -15, -20, -25, -30, -60
GT76129-XX 76.1 (3) 2.90 (0.11) 5.24 -075, -10, -15, -20, -25, -30, -40, -60
GT76145-XX 76.1 (3) 4.50 (0.18) 7.96 -10, -15, -20, -30, -60
GT88932-XX 88.9 (3.5) 3.20 (0.13) 6.76 -10, -15, -20, -25, -30, -40, -60
GT101636-XX 101.6 (4) 3.60 (0.14) 8.70 -10, -20, -25, -30, -60
GT114336-XX 114.3 (4.5) 3.60 (0.14) 9.83 -075, -10, -15, -20, -25, -30, -40, -60
GT114350-XX 114.3 (4.5) 5.00 (0.2) 13.51 -10, -15, -20, -30, -40, -60
Article no. Wall thickness Weight Article no. corresponding to available length
Dimension mm (in)
(Square profile) mm (in) (kg per m) (ex. 2000 mm length corresponds to -20)
AT605-XX 60.3 (2.4) 5.00 (0.2) 2.33 -10, -15, -17, -20, -25, -30, -60
Article no. Wall thickness Weight Article no. corresponding to available length
Dimension mm (in)
(Square profile) mm (in) (kg per m) (ex. 2000 mm length corresponds to -20)
GB50503-XX 50 × 50 (2 × 2) 3.00 (0.12) 4.32 -07, -10, -12, -15, -20, -30, -60
GB60603-XX 60 × 60 (2.4 × 2.4) 3.00 (0.12) 5.26 -10, -15, -20, -25, -30, -60
©
©2019–2020
2019–2020MAFI
MAFIAB.
AB.All
Allrights
rightsreserved.
reserved.
Threaded Rods and U-bolts Rev 3 Rev 3 Threaded Rods and U-bolts
107
9705
Material
A4
Length mm (in)
1000 (39.4)
Ø metric
M8
33815
HDG 8.8
HDG 8.8
200 (7.9)
250 (9.8)
M10
M10
U-bolts
9535 A4 1000 (39.4) M10
U-bolts Ø
Thread
C–C Effective
The MAFI range of U-bolts are made Article no. Type length
mm (in) metric length mm (in)
mm (in)
of 8.8 HDG or A4 steel. They range in
size and shape to fit different member 3756-1 A 70 (2.8) M8 45 (1.8) 50 (2)
profiles. The U-bolt kits in 3013-1 B 90 (3.5) M8 95 (3.7) 107 (4.2)
the table include nuts and washers.
2802-1 A 81 (3.2) M10 85 (3.3) 95 (3.7)
© 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
108 Rev 3 Various Accessories
Various Accessories
Various
Accessories
Lightning Protector
Designed to protect equipment poles from lightning current.
Protection Mat
Designed to prevent damage to roof finish.
Rubber Insert
Designed to prevent any cable deformation.
Fits any 7/8" cable holder.
Article no. Outer diameter mm (in) Inner diameter mm (in) Length mm (in)
Concrete Plate
Designed to act as ballast weight to increase performance of
free standing products.
Parent member Torque (Nm) Torque (Nm) Torque (Nm) Torque (Nm) Torque (Nm)
ø mm (in) General Product: 3272 Product: 3541 Product: 3544 Product: 2414
25 (1) 77 - - - -
42.3 (1.7) 152 - - - -
48.3 (1.9) 178 356 - - -
60.3 (2.4) 230 460 115 172 -
76.1 (3) 298 596 159 223 -
88.9 (3.5) 353 706 176 264 -
101.6 (4) 408 816 204 306 816 Mresisting
114.3 (4.5) 462 924 231 346 924
139.7 (5.5) 572 1144 - - -
152.4 (6) 627 1254 - - -
168.9 (6.6) 698 1396 - - -
193 (7.6) 802 1396 - - -
244.5 (9.6) 1025 - - - -
Mresisting Mresisting
F wind
F wind F wind
Example using two brackets with double Example using two brackets with Example using three brackets with
clamps. Parent member is ø 114.3 mm single clamps. Parent member single clamps. Parent member
(4.5 in). Maximum torque is then 2 x 924 is ø 114.3 mm (4.5 in). Maximum is ø 114.3 mm (4.5 in). Maximum
= 1848 Nm. torque is then 2 x 462 = 924 Nm. torque is then 3 x 462 = 1386 Nm.
Bracket Properties
Guidance
MAFI brackets are flexible – they can fit different sizes and profiles of parent member, and the offset distance can be varied.
This table allows a quick comparison of load capacity, parent member, offset member and offset range. Please read our
disclaimer found on page 4.
It’s OK to have the pole a size less than the U-bolt. A U-bolt works by squeezing the pole against the bracket through the
tangential point of contact, not by gripping the sides of the pole. It's important to follow the installation instructions regarding
the specified nut-tightening torque. The tightening torque is calculated for every MAFI U-bolt leg or threaded rod to produce the
required tension. It's not going to slip if it's installed properly.
ø U-bolt mm (in) 60.3 (2.4) 76.1 (3) 88.9 (3.5) 101.1 (4) 114.3 (4.5)
76.1 (3)
114.3 (4.5)
Load Capacity is the maximum mass (equipment plus offset member) that you can hang on a pair of brackets at the maximum
offset. Extra brackets can be added to increase the load capacity proportionately e.g. two pairs of brackets supporting a single
offset member can carry double the mass of a single pair.
In addition to the permitted equipment mass, brackets mounted at least as a pair can support a 160 kg rigger standing on the
end, exceptions are 53XX and 4324X.
In addition to the permitted equipment mass, brackets mounted at least as a pair can support a fall arrest load of 6 kN.
Exceptions are 3274, 53XX and 4324X. If a fall arrest event would occur, all involved brackets should be replaced.
All brackets in the table apart from 532X and 4324X are sold as pairs.
Load Capacity Parent Member versus Offset Min and Max Offset
The 3263 bracket pair to the left can Member The minimum and maximum
carry 120 kg/265 lb. c/c distance between parent
The parent member is what the bracket
Using two pairs of bracket means and offset member.
is attached to, while the offset member is
that the load capacity doubles to where the equipment goes.
240 kg/529 lb.
F
2xF
Offset member
Parent member
Product Load Capacity Parent Member Offset Member Min Offset Max Offset
3610 250 kg 76.1 - 139.7 mm 60.3 - 76.1 mm Upper arm: Upper arm:
(551 lb) (3 - 5.5 in) (2.4 - 3 in) 219 mm 424 mm
60 - 120 mm (8.6 in) (16.7 in)
(2.4 - 4.7 in) 88.9 - 114.3 mm 1) Lower arm: Lower arm:
60 - 120 mm (3.5 - 4.5 in) 1) 250 mm 305 mm
(2.4 - 4.7 in) (9.8 in) (12 in)
3611 250 kg 76.1 - 139.7 mm 60.3 - 76.1 mm 219 mm 424 mm
(551 lb) (3 - 5.5 in) (2.4 - 3 in) (8.6 in) (16.7 in)
60 - 120 mm
(2.4 - 4.7 in) 88.9 - 114.3 mm 1)
60 - 120 mm (3.5 - 4.5 in) 1)
(2.4 - 4.7 in)
3612 250 kg 76.1 - 139.7 mm 60.3 - 76.1 mm 250 mm 305 mm
(551 lb) (3 - 5.5 in) (2.4 - 3 in) (9.8 in) (12 in)
60 - 120 mm
(2.4 - 4.7 in) 88.9 - 114.3 mm 1)
60 - 120 mm (3.5 - 4.5 in) 1)
(2.4 - 4.7 in)
3613 250 kg 139.7 - 244.5 mm 60.3 - 76.1 mm Upper arm: Upper arm:
(551 lb) (5.5 - 9.6 in) (2.4 - 3 in) 264 mm 499 mm
120 - 200 mm (10.4 in) (19.6 in)
(4.7 - 7.9 in) 88.9 - 114.3 mm 1) Lower arm: Lower arm:
120 - 200 mm (3.5 - 4.5 in) 1) 295 mm 379 mm
(4.7 - 7.9 in) (11.6 in) (14.9 in)
) Requires U-bolt kit option 2867-1 for mounting on circular member 88.9 - 114.3 mm (3.5 - 4.5 in).
1
Product Load Capacity Parent Member Offset Member Min Offset Max Offset
5312 100 kg 50 - 60 mm 50 - 60 mm 50 mm 60 mm
(220 lb) (2 - 2.4 in) (2 - 2.4 in) (2 in) (2.4 in)
) Requires U-bolt kit option 2867-1 for mounting on circular member 88.9 - 114.3 mm (3.5 - 4.5 in).
1
It’s OK to have the pole a size less than the U-bolt. A U-bolt works by squeezing the pole against the bracket through the
tangential point of contact, not by gripping the sides of the pole. It's important to follow the installation instructions regarding
the specified nut-tightening torque. The tightening torque is calculated for every MAFI U-bolt leg or threaded rod to produce the
required tension. It's not going to slip if it's installed properly.
ø U-bolt mm (in) 60.3 (2.4) 76.1 (3) 88.9 (3.5) 101.1 (4) 114.3 (4.5)
76.1 (3)
114.3 (4.5)
Load Capacity is the maximum mass (equipment plus offset member) that you can hang on a pair of brackets at the maximum
offset. Extra brackets can be added to increase the load capacity proportionately e.g. two pairs of brackets supporting a single
offset member can carry double the mass of a single pair.
In addition to the permitted equipment mass, all brackets mounted at least as a pair can support a 160 kg rigger standing on the
end.
All brackets in the table are sold as pairs.
Load Capacity
The 3541 bracket pair to the
left can carry 100 kg/220 lb.
Using two pairs of bracket F 2xF
means that the load capacity
doubles to 200 kg/441 lb.
Product Load Capacity Side Force Offset Member Min Offset Max Offset
Configuration 1 Configuration 2
Package data
Package data
Package data
Mora
Dallas
Shanghai
Nairobi
www.mafigroup.com
Table of Content 119
content
4316 Single Pole 82
4415 3-Sector Antenna Mount 20
4418 3-Sector Antenna Mount 20
4600 Free standing Corner Mount 92
Article no. Product name Page 4601 Free standing Corner Mount 92
1234 RRU Adaptor Plate 34 4602 Free standing Corner Mount 92
1236 PSU Adaptor Plate 36 5012 AIR Light Bracket 54
1237 RRU C-Rail Bracket 37 5013 AIR Light Bracket 54
1241 Micro ERS Tilt Bracket 39 5022 AIR Medium Bracket 56
1242 Universal RRU Mount 40 5023 AIR Medium Bracket 56
2230 Telescopic Strut Support 74 5030 AIR Heavy Bracket 58
2231 Telescopic Strut Support 74 5031 AIR Heavy Bracket 58
2232 Telescopic Strut Support 74 5110 Radio Support 30
2233 Telescopic Strut Support 74 5310 Joint Plate Kit 22
2234 Telescopic Strut Support 74 5311 Joint Plate Kit 22
2235 Telescopic Strut Support 74 5312 Joint Plate Kit 22
2414 Heavy Duty Wall Mount 66 5320 Crossover Kit 24
3022 Adaptor beams 78 5321 Crossover Kit 24
3058 GPS Mount 48 6029 Multi ERS Bracket XL 32
3115 Antenna Offset 50 6030 Dual ERS Bracket 33
3116 Antenna Offset 50 7000 Stainless Steel 10-hole Groundbar 104
3117 Antenna Offset Large 52 8051 Small Adjustable Cabinet Platform 98
3263 One-Direction Offset Family 10 8057 Wall Mounted Cabinet Platform 70
3265 One-Direction Offset Family 10 31154 Antenna Adaptor Kit 50
3268 Symmetric Offset Family 12 32655 Cable Holder Family 102
3270 Symmetric Offset Family 12 32657 Cable Holder Family 102
3272 One-Direction Offset Family 10 32658 Cable Holder Family 102
3273 One-Direction Offset Family 10 32660 Cable Holder Family 102
3274 Small Universal Pole Mount 18 32663 Cable Holder Family 102
3510 Rafter Bracket Kit 80 32664 Cable Holder Family 102
3541 Medium Duty Wall Mount 62 41121 Free Stander Light 86
3544 Large Offset Wall Mount 64 43091 Free Stander Medium 88
3610 Raking Tower Leg Offset Family 14 43092 Free Stander Medium 88
3611 Vertical Tower Leg Offset Family 16 43246 Combiclamp Family 26
3612 Vertical Tower Leg Offset Family 16 43247 Combiclamp Family 26
3613 Raking Tower Leg Offset Family 14 43248 Combiclamp Family 26
3614 Vertical Tower Leg Offset Family 16 43249 Combiclamp Family 26
3615 Vertical Tower Leg Offset Family 16 43692 Corner Wall Mount 68
4019-2 Double RRU Mount 42 91100 Small Adjustable Cabinet Platform 98
4019-3 Triple RRU Mount 42 91101 Small Adjustable Cabinet Platform 98
4019-4 Quattro RRU Mount 42 91110 Extra Pole Kit 96
4020 Single RRU Mount 42 Tubes and Beams 106
4036 Single RRU Support 44 Threaded Rods and U-bolts 107
4037 Dual RRU Support Expansion 44 Various Accessories 108
4112 Free Stander Light 86 Rotational Slip Table 110
4120 Roof Butler 84 Bracket Properties 111
4309 Free Stander Medium 88 Wall Bracket Properties 114
4310 Free Stander Platform 90 Package Data 116
MAFI GROUP Overall e-mail adress: info@mafigroup.com
Seljavägen 15/Box 275 Order e-mail adress: order@mafigroup.com
SE-792 95 Mora, Sweden Personnel: firstname.lastname@mafigroup.com
Tel: +46 (0)250-381 60 www.mafigroup.com