Professional Documents
Culture Documents
EYENUTS, STANDARD
Most commonly used for deadending, back-guying, and attaching pole
head guys on the threaded ends of crossarm bolts. Drop-forged hot
dip galvanized steel.
EYENUTS, THIMBLEYE®
For attaching to thru-bolts or threaded end of straight or angle-Thim-
bleye bolts for straight-away head guys. Drop-forged galvanized steel.
Nuts are contoured to minimize bending and kinking of guy strand.
No. 6510
EYENUTS, TWINEYE®
Used for head or stub guying of two strands, Twineye Nuts can be
attached to thru-bolts or threaded end of straight or angle Thimbleye
bolts. Grooves are contoured to protect guy strands. Drop-Forged
galvanized steel.
Dimensions In Inches Approx. Ship
Catalog Tapped Wt. Lbs. Per
No. For A B C D E F R 100 Pcs.
6560 5/8 Bolt 17/8 111/16 11/8 15/16 23/8 35/8 5/16 190
6561 3/4 Bolt 17/8 111/16 11/8 15/16 23/8 35/8 5/16 184
*6562 1" Bolt 17/8 111/16 11/8 15/16 23/8 35/8 5/16 188
and PISA No. 6562
*Cat. No. 6562 1" eyenut fits both 1" and 3/4" PISA rods.