Professional Documents
Culture Documents
2. HAZARDS IDENTIFICATION
Classification
2. HAZARDS IDENTIFICATION
Indication of danger: T - Toxic
Carcinogenic Category 2
Mutagenic Category 3
Toxic to Reproduction Category 2
C - Corrosive
N - Dangerous for the environment
Classification according to European directive on classification of hazardous
preparations 1999/45/EC
3. COMPOSITION/INFORMATION ON INGREDIENTS
For the full text of the R phrases mentioned in this Section, see Section 16
Skin contact: Wash off with. Calcium gluconate solution. First treatment with calcium gluconate paste.
Remove and wash contaminated clothing before re-use. Call a physician immediately.
Product code: 1683088 Product name: TRIDUR MAX BL Revision Date: 08.10.2010 Page 2 / 9
Product name: TRIDUR MAX BL
Eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Immediate medical attention is required.
Ingestion: Call a physician or Poison Control Centre immediately. Do not induce vomiting without medical
advice. Never give anything by mouth to an unconscious person.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media: Use extinguishing measures that are appropriate to local circumstances and the surrounding
environment.
Extinguishing media which must not DO NOT use combustible materials such as sawdust.
be used for safety reasons:
Special protective equipment for fire- As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH
fighters (approved or equivalent) and full protective gear.
Specific hazards: In case of fire hazardous decomposition products may be produced such as, hydrogen fluoride,
Nitrogen oxides (NOx), Sulphur oxides.
Specific methods: Water mist may be used to cool closed containers. Dike and collect water used to fight fire. Fire
residues and contaminated fire extinguishing water must be disposed of in accordance with
local regulations.
Methods for cleaning up: Avoid formation of aerosol. Soak up with inert absorbent material. Keep in suitable, closed
containers for disposal. Clean contaminated surface thoroughly. Dispose of in accordance with
local regulations. Do not allow to dry. The product is oxidizing when dried.
Safe handling advice: Do not breathe vapours/dust. Remove and wash contaminated
clothing before re-use. Handle in accordance with good industrial
hygiene and safety practice. Do not ingest. For personal protection
see section 8.
Storage
Technical measures/Storage conditions: Keep containers tightly closed in a dry, cool and well-ventilated
place. Keep locked-up.
Product code: 1683088 Product name: TRIDUR MAX BL Revision Date: 08.10.2010 Page 3 / 9
Product name: TRIDUR MAX BL
Storage temperature
Minimum storage temperature -5 °C
Maximum storage temperature 45 °C
Engineering measures:
Ensure adequate ventilation, especially in confined areas
Hand protection: Wear protective gloves. The suitability for a specific workplace should be discussed with the
producers of the protective gloves. Please observe the instructions regarding permeability and
breakthrough time which are provided by the supplier of the gloves. Also take into
consideration the specific local conditions under which the product is used, such as the danger
of cuts, abrasion, and the contact time.
Skin and body protection: Chemical resistant apron. long sleeved clothing. boots.
Eye protection: tightly fitting safety goggles. face-shield. Ensure that eyewash stations and safety showers are
close to the workstation location.
Hygiene measures: Avoid contact with skin, eyes and clothing. Handle in accordance with good industrial hygiene
and safety practice. Wash hands before breaks and immediately after handling the product.
When using, do not eat, drink or smoke.
Product code: 1683088 Product name: TRIDUR MAX BL Revision Date: 08.10.2010 Page 4 / 9
Product name: TRIDUR MAX BL
Explosion limits:
Conditions to avoid: To avoid thermal decomposition, do not overheat. Do not allow to dry. The product is oxidizing
when dried.
Hazardous reactions: Corrosive in contact with metals. Gives off hydrogen by reaction with metals. Exothermic
reaction.
Acute toxicity
Component Information
Components LD50/oral/rat = LC50/inhalation/rat = LD50/dermal/rat =
Chromium nitrate - 13548-38-4 3250 mg/kg No information available No information available
Sodium nitrate - 7631-99-4 1267 mg/kg No information available No information available
Product code: 1683088 Product name: TRIDUR MAX BL Revision Date: 08.10.2010 Page 5 / 9
Product name: TRIDUR MAX BL
Product Information
Local effects
Skin contact: Causes burns. Extremely corrosive and destructive to tissue. Harmful in contact with skin.
Eye contact : Causes burns. Corrosive to the eyes and may cause severe damage including blindness.
Inhalation : Causes burns. Inhaled corrosive substances can lead to a toxic oedema of the lungs. Causes
inflammation and ulceration of the respiratory tract. Harmful by inhalation.
Ingestion : Causes burns. Ingestion causes burns of the upper digestive and respiratory tracts. Extremely
corrosive and destructive to tissue. Harmful if swallowed.
Chronic toxicity:
Sensitization:
May cause sensitization by inhalation and skin contact.
Carcinogenic substances
Contains: Carcinogenic substances
Components EU 67/548 IARC: CA PROP 65 Australia - Australian EPA - IRIS OSHA
PCS Carcinogens Carc.
Assessment
Chromium nitrate 3
Sodium fluoride 3
Cobalt(II) nitrate 2 2B X
cobalt dichloride 2 2B X
Aquatic toxicity: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment
Sodium fluoride - 7681-49-4 96 h EC50 Selenastrum capricornutum = 272 mg/L 96 h LC50 (Lepomis macrochirus) > 530
mg/L
Hydrogen fluoride - 7664-39-3 48 h LC50 (Lepomis macrochirus) = 660
mg/L
Product code: 1683088 Product name: TRIDUR MAX BL Revision Date: 08.10.2010 Page 6 / 9
Product name: TRIDUR MAX BL
Contaminated packaging: Empty containers should be taken for local recycling, recovery or waste disposal
EWC waste disposal No: According to the European Waste Catalogue, Waste Codes are not product specific, but
application specific
IMDG
UN-No: UN2922
Proper shipping name: Corrosive liquid, toxic, n.o.s.
Technical Name (IMDG): Hydrofluoric acid,Cobalt(II) nitrate
Ems no.: F-A,S-B
Hazard Class: 8
Subsidiary Risk: 6.1
Packing group: II
Marine pollutant: P
Hazard Label (IMO/IMDG): 8
Hazard Label II (IMO/IMDG): 6.1
ADR/RID
UN-No: 2922
Proper shipping name: Corrosive liquid, toxic, n.o.s
Technical Name (ADR): Hydrofluoric acid,Cobalt(II) nitrate
Hazard Class: 8
Subsidiary Risk: 6.1
Packing group: II
Classification Code: CT1
Kemler Number (ADR): 86
ADR/RID-Labels 8
Hazard Label II (ADR): 6.1
ICAO/IATA
UN-No: UN2922
Proper shipping name: Corrosive liquid, toxic, n.o.s.
Technical Name (IATA): Hydrofluoric acid,Cobalt(II) nitrate
Hazard Class: 8
Subsidiary Risk: 6.1
Packing group: II
Hazard Label: 8
Hazard Label II: 6.1
Symbol(s)
Product code: 1683088 Product name: TRIDUR MAX BL Revision Date: 08.10.2010 Page 7 / 9
Product name: TRIDUR MAX BL
R-phrase(s)
R49 - May cause cancer by inhalation
R68 - Possible risk of irreversible effects
R60 - May impair fertility
R34 - Causes burns
R20/21/22 - Also harmful by inhalation, in contact with skin and if swallowed
R42/43 - May cause sensitization by inhalation and skin contact
R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment
S-phrase(s)
S23 - Do not breathe dust/fume/gas/mist/vapours/spray
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)
S53 - Avoid exposure - obtain special instructions before use
S57 - Use appropriate container to avoid environmental contamination
S60 - This material and its container must be disposed of as hazardous waste
S61 - Avoid release to the environment. Refer to special instructions/safety data sheets
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection
Substances currently restricted by WEEE/RoHS (European Directive 2002/96/EC , 2002/95/EC) or ELV (European
Directive 2000/53/EC):
Please note: Current legislation restricting the use of certain substances applies to „homogeneous material“ in finished
articles being supplied to the market. Substances deposited during surface finishing may have a composition (weight
percent) higher than the weight percent of the substance in the operating solution from which the deposit is made.
Atotech encourages its customers to implement systems to ensure their finished products comply with the regulations in
force.
International Inventories
Product code: 1683088 Product name: TRIDUR MAX BL Revision Date: 08.10.2010 Page 8 / 9
Product name: TRIDUR MAX BL
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its
publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal
and release and is not to be considered a warranty or quality specification. The information relates only to the specific material
designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in
the text
Product code: 1683088 Product name: TRIDUR MAX BL Revision Date: 08.10.2010 Page 9 / 9