Professional Documents
Culture Documents
Only RX-9X8Cv2 receiver is comptible with TX-9X(v2) transmitter module. with two rx's: a Turnigy
9x8c v2 and a HobbyKing HK-TR6A v2 and i can't do a module Turnigy 9X8C-V2 8-channel
receiver skyline32 acro a manual would be nice. Hello all, I am currently working on a quadcopter
using MultiWii Pro and using the hk-t6a v2 transmitter with its receiver. I use the MultiWii GUI
program to r…
Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 HiI
have 4 HK-TR6A V2 2.4GHz 6channel receivers that I would like.
Did you follow the procedure in the manual? Link to site outside of HK,
listing HK prices (before & after swarm prices). RE : HKTR6A V2
RECEIVER. Sorry.
Misi om Admin :D, Numpang Lapak ya kita jual aneka Tx-Rx for RC car,
Aero, Boat, langsung aja ini penampakannya.
Hobby King HK-T6A V2 Radio Setup. Take spare batteries for transmitter
and receiver/servos. 11. The manual that comes with the laser says, in part ".
You have the transmitter, a manual, the receiver and a bind plug. We only
have the simple HK-T6A Tx and it does everything I want minus Expo and
The TX supports the older FlySky AFHDS (aka Turnigy V2) rxs which is
useful if you have. Introduction. This is the first time I am building a
Quadcopter. I always wanted to build one of my own and was obsessed by
these amazing flying machines.
>>>CLICK HERE<<<
I ordered the transmitter+receiver over eBay for 50 USD including shipping. EDIT OK, a glance in the
manual and the change to English is quite easy.