Professional Documents
Culture Documents
ENGINEERING LABORATORY V
BDA37201
FLUID MECHANICS 2 AND THERMODYNAMIC 2
2020/2021 SEMESTER 1
INTRODUCTION
• Perform practical work according to procedure, instruction and specified aims whilst
using equipments efficiently in order to obtain data, information and solve
problems scientifically
• Prove theory based on experiment, observation, data processing and information
• Encourage healthy attitude such as truthfulness, dedication, discipline,
cooperation, creativity and awareness to safety.
• Develop high skill in production of a quality work, preparation and professional
report presentation.
• Practical attendance is compulsory and should not be less than 80%. Students have
to record their attendance. Non attendance must be verified by supporting
documents.
• Practical report has to be SUBMITTED ON THE NEXT DAY AFTER THE PRACTICAL
CLASS to the designated lecturer/instructor/tutor on duty at each laboratory before
4.00 pm. LATE REPORT WILL LEAD TO EITHER ZERO OR REDUCED MARKS (5% per
day)
• Students are not allowed to smoke, eat or drink during practical classes.
Total: 100 %
MARKING SCHEME FOR FLUID MECHANICS II LABORATORY
i.Investigation (PLO4) 70 %
ii.Communication (PLO3) 25 %
iii.Team work assessment (PLO5) 5%
Total: 100 %
* Total marks consists of 50 % overall final marks
• Conclusions
• References
OBSERVATION
PERBINCANGAN
PERBINCANGAN 30%
20% DISCUSSION
DISCUSSION
KESIMPULAN KESIMPULAN
10% 15%
CONCLUSION CONCLUSION
CADANGAN
5% JUMLAH
RECOMMENDATION 100%
RUJUKAN TOTAL
5%
REFERENCES
JUMLAH
100%
TOTAL
• Fluid Mechanics II
F1 Pelton Wheel
F2 Friction Loss Along a Pipe
F3 Centrifugal Pump
F4 Boundry Layer
F5 Cavitation
Maznan® Page 19
FKMP UTHM
EXPERIMENT TITLES
FLUID MECHANICS II
1. PELTON WHEELS
• To determine the performance and torque characteristics of the Pelton Wheels.
4. BOUNDARY LAYER
• To measure the velocity distribution, displacement thickness and momentum
thickness in a boundary layer of flat plate. Furthermore to made a comparison
between smooth and rough plate.
JKM FKMP UTHM
5. CAVITATION
• To determine the cavitation phenomenon in a throat
Maznan® Page 20
FKMP UTHM
THERMODYNAMICS II