Professional Documents
Culture Documents
Page 1/11
This information corresponds to the current state of knowledge. Kistler reserves ©2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded. Kistler is a registered trademark of Kistler Holding AG.
maXYmos NC – XY Monitor for Monitoring and Controlling NC Joining Modules, Type 5847A...
Technical Data
Page 2/11
This information corresponds to the current state of knowledge. Kistler reserves ©2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded. Kistler is a registered trademark of Kistler Holding AG.
maXYmos NC – XY Monitor for Monitoring and Controlling NC Joining Modules, Type 5847A...
Measurement Programs
Number 128
Switchover via Menu/BUS
Switchover time ms <50
Switching Signals
Number 2
Channel assignment X or Y (selectable)
Switching point Threshold X reached
Threshold Y reached
Output Dig.-Out or Fieldbus
Mode Free-running or latch
Influence on evaluation No
Real-time Reactions
Switching signals, NO-PASS ms <1
BREAK, inflexion,
TUNNELBOX-X, TUNNELBOX-Y
5847A_003-126e-08.14
Power Supply
Voltage VDC 24 (18 … 30)
Power consumption (typical) VA 45
Power consumption (max.) VA 80
Screw-type/plug-in connector, 1 supplied with device
Wago, order no. 734-103/037-000
Housing: order no. 734-603
Page 3/11
This information corresponds to the current state of knowledge. Kistler reserves ©2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded. Kistler is a registered trademark of Kistler Holding AG.
maXYmos NC – XY Monitor for Monitoring and Controlling NC Joining Modules, Type 5847A...
Interfaces
The module, which features an XY channel pair and all data
and control interfaces, forms the heart of the XY monitor.
maXYmos NC:
Measuring and evaluation module
(MEM)
Power supply
Digital IO 24 VDC
16 inputs and
… or they can be used as a compact unit. In this case the MEM outputs (24 V) USB (Device)
2 analog monitor for laptop
is inserted into the rear slot of the DIM, forming a secure me-
outputs for X and Y
chanical and electrical connection: USB (Host)
Channel-X (1) for USB Stick
Analog sensors:
Poti, ±10 V, LVDT, USB (Host)
inductive for USB Stick
Page 4/11
This information corresponds to the current state of knowledge. Kistler reserves ©2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded. Kistler is a registered trademark of Kistler Holding AG.
maXYmos NC – XY Monitor for Monitoring and Controlling NC Joining Modules, Type 5847A...
Charge amplifier
Cable SERCOS III Cable
Piezoelectric safety zone box KSM18029160-5 1200A161A...
force sensor KSM18029161-1 (Cable length max. 5 m)
Configuration, parameterization,
evaluation and visualization
maXYmos NC Type 5847A...
Motor control
feedback
PC
Ethernet interface
CSV, Q-DAS®, PDF, XML,
Visualization via VNC®
Functional principle of an NC joining system using the NC joining module NCFH Type 2151B... and maXYmos NC Type 5847A...
PROFIBUS
PROFINET PLC
EtherNet /IP
Y X Y X Y t Y t Y X EtherCAT
5847A_003-126e-08.14
Networking/Multiview of maXYmos NC
Page 5/11
This information corresponds to the current state of knowledge. Kistler reserves ©2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded. Kistler is a registered trademark of Kistler Holding AG.
maXYmos NC – XY Monitor for Monitoring and Controlling NC Joining Modules, Type 5847A...
Motion Element: this element serves to actuate the Input Element: when this element is activated, the
NC joining module, e.g. to absolute/relative positi- system waits for the configured digital input signal
on, or force. In addition, force regulation, deflection and then continues the sequence.
compensation or stopping on an external signal, or
the response to an inflextion point event can be Output Element: when this element is activated, the
configured. corresponding configured output is set on the de-
vice.
Wait Element: when the sequence reaches this ele-
ment, it is paused and acknowledgment must be ob- Home Position Element: this element is contained
tained from the PLC before the sequence continues. once in the sequence and defines the basic settings.
It is approached with the predefined speed when the
element is activated or via the fieldbus.
Label Element: this element provides interaction
with the PLC. In the process, the label number is Sequence End Element: this element indicates that
transferred to the PLC when the element Label is the sequence has been stopped. Subsequent ele-
activated. ments are no longer executed.
Page 6/11
This information corresponds to the current state of knowledge. Kistler reserves ©2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded. Kistler is a registered trademark of Kistler Holding AG.
maXYmos NC – XY Monitor for Monitoring and Controlling NC Joining Modules, Type 5847A...
Examples:
Type UNI-BOX NC
A defined gradient change is expected within the
expectancy range (box) and can be used as a fur-
ther switching condition in the sequence.
Type SPEED NC
The measurement curve must not cross the upper
or lower line of the envelope. This evaluation ob-
ject is easy to master.
Type LINE-X NC
Type TIME NC
The line must be crossed once. An X-value at the
point of intersection is monitored.
Type LINE-Y NC
Type NO-PASS NC
Evaluates the X-hysteresis between forward and Provides NOK and online signal in case of sudden
reverse curves on a horizontal line. gradient change within an expectancy range (box),
e.g. in case of tool breakage.
Type
TypeGRAD-Y
GRADIENT-Y Type CALC NC
NC
Evaluates the gradient dY/dX between two vertical Object references two selectable process values
lines. and performs calculations, e.g. the X-difference
between two ripples, and evaluates them.
Type GRADIENT-X NC
Type AVERAGE NC
IO NIO
X1 X2
Y2
Y1
Product Testing Example: Distance check between two snap- Front Panel Mounting
in points of a latch. The two GET-REF boxes supply the co- After removing the fixing bracket and rear frame, push the
ordinates of the snap-in points to the CALC objects. These display through the front panel opening. Then screw the frame
calculate and evaluate the distances in the X and Y directions. back on. The measuring module (MEM) can now be pushed
into the slot of the display module if required.
Page 9/11
This information corresponds to the current state of knowledge. Kistler reserves ©2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded. Kistler is a registered trademark of Kistler Holding AG.
maXYmos NC – XY Monitor for Monitoring and Controlling NC Joining Modules, Type 5847A...
Dimensions
Zeichnung für Datenblatt / 003-126
Measuring and evaluation module (MEM)
77 137
33 22,5
28,2 54,4 16,8
Digital I/O
Reset
X14 X10
Power
X1
24 V
GND
I/O I/O
±10 V Device
D1 state
Uout USB
X2
Type 5700A31
X3
Channel X
0,5
35 EN 60715
X15 X11 X4
±10 V
Ethernet
X5
M3 x7
32,3
198
33
X6
Channel Y
X16 X12
Fieldbus
X7
±10 V
M3 x 6
In
X8
Out
Servo X18
Display
Profibus DP
82,85
82,85
82,5
X17
X9
Piezo X13
maXYmos NC D2
Type 5847
Längenmasse * ...0,5 >0,5...3 > 3...6 > 6...30 > 30...120 >120...400 >400..1000
-0,2 +0,25
weder kopiert noch vervielfältigt, noch an Drittpersonen
Winkelmasse kürz. Schenkel ...10 > 10...50 > 50...120 >120...400 >400...
Abmasse ±1° ±0°30' ±0°20' ±0°10' ±0° 5'
mitgeteilt oder zugänglich gemacht werden.
Page 10/11
This information corresponds to the current state of knowledge. Kistler reserves ©2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded. Kistler is a registered trademark of Kistler Holding AG.
maXYmos NC – XY Monitor for Monitoring and Controlling NC Joining Modules, Type 5847A...
Windows® Software maXYmos PC (Basic) Type 2830A1 Included Accessories for Type 5847A0 Type/Mat. No.
• Organize firmware updates • Windows® software maXYmos PC (Basic) 2830A1
• Save device settings in a backup file
• Restore settings to the device Accessory (not included) Type
(included in the scope of delivery of the measuring and evaluation • maXYmos force transmitter cable,
module Type 5847A0) length 5 m KSM18028884-5
• maXYmos force strain gage cable,
Windows® Software maXYmos PC (Plus) Type 2830B2* length 5 m KSM18028883-5
Like Basic version, additional features: • SERCOS III connection cable,
5847A_003-126e-08.14
• Log explorer opens and interprets exported test records length 5 m KSM18029160-5
• Generation of an Excel® statistical file with selected process • Safety zone box cable,
values (2 cables required), length 1 m KSM18029161-1
• Cursor measurement, bundle presentation of curves, etc.
• Final Y(X) curves can also be presented as Y(t) or X(t)
• PDF print function for test records
*Product availability: December 2014