Professional Documents
Culture Documents
htm
ECO - 15 u ECO-22
ECO - 25 u ECO-30 u ECO-35
Economical u Single Tube u Grounded Grid
High Power u FM Broadcast Transmitter
Features:
Attractively priced
80% PA Efficiency
Application:
The high power ECO series transmitters described in this brochure have been designed to meet the needs of broadcasters who need between 12KW
and 35KW of transmitter power to achieve their targeted ERP
requirements. The ECO Series, Single Tubed Grounded Grid, FM transmitters offer excellent quality and the highest level of reliability at very
affordable prices.
Single Button Operation: One touch of the start switch, in either local or remote position, turns the transmitter on. Once filament warm-up occurs
the transmitter will automatically activate, provided all interlocks are closed. The controller will automatically restart the transmitter when power is
restored after a power outage.
1 of 2 12/30/2013 11:17 AM
ECO - 15 u ECO-22 ECO - 25 u http://www.energy-onix.com/HTML/Catalog Sheets/eco15-35.htm
Circuit Breaker Protection: Every major circuit in the ECO series is protected by circuit breakers. Independent circuit breakers for the Driver,
blower, filament, and PA power supply are conveniently located on the Main circuit breaker panel along with the circuit breaker.
Remote Control: The ECO 15, 22, 25 & 35 are designed for both local and remote operation. Start, stop, VSWR and overload reset, and metering
is available at the remote control point.
Main Features
2 KW Solid State Driver: The ECO series High Power Transmitters contain a 2KW solid state driver with independent power supply. This driver
section can be placed on the air as an emergency back-up transmitter.
Single Long Life Triode Final Tube: The Hi MU Triode tube in Grounded Grid Configuration minimizes operational expense. Triode tubes have
an average life of 4 years, cost less to replace and are far more robust than their tetrode counterparts that use fragile screen circuit technology. The
result is continued cost savings with the ECO. We use the 3CX15,000A7 in the ECO 15, and 22. We use the 3CX20,000A7 in the ECO-25, 30 and
35.
Power Supplies: Regulated power supplies are used for the ECO controller. A filament voltage regulator is included in the filament supply. Full
wave bridge rectified power supplies are used for the Driver and Plate supplies.
Exciter: All ECO high power transmitters are provided with the Energy-Onix SST-100 high performance
exciter.
TECHNICAL SPECIFICATIONS
88 - 108 mHz
Model Power Range Power Consumption Weight Frequency Range :
23.2KW @ 15KW
ECO-15 5KW - 17.5KW 1400 lb. Modulation Capability : +250 KHz
(65%)
32KW @ 22KW At least 80db below carrier
ECO-22 5KW - 23.5KW 1800 lb. RF Harmonics :
(65%)
37KW @ 25KW At least 55db below carrier
ECO-25 5KW - 27.5KW 2200 lb. AM Noise :
(68%)
45KW @ 30KW At least 70db below 100% mod. at 400Hz
ECO-30 5KW - 32.5KW 2400 lb. FM Noise :
(68%)
52KW @ 35KW Please see Exciter Specs.
ECO-35 5KW - 35KW 2400 lb. Audio Performance :
(67%)
Line Voltage: 208/250 VAC, 50 or 60HZ, Single or Three phase Cabinet Size : 37" D x 81" H x 26 " W
Output: 50 Ohm, 3 1/8" EIA flange Power Supply Vault : 45" D x 36" H x 32 " W
ECO series transmitters including the solid state driver are manufactured by Energy-Onix at our Valatie, NY factory. Specifications listed
in this brochure are subject to change without notice.
Home || Company History || Guestbook/Information Request || Broadcast Transmitters || LPFM|| Medium Pwr Packages || High Pwr Packages ||
CONTACT INFORMATION
Our Address:
PO BOX 801
1306 River Street
Valatie,NY 12184
Phone 518.758.1690 FAX 518.758.1476
E-MAIL: info@energy-onix.com
2 of 2 12/30/2013 11:17 AM