Professional Documents
Culture Documents
Racid B255 PDF
Racid B255 PDF
1. The Output Logic model is set as per the relay default settings. To disable any of the swtiches S1 ..
S8, switch the DIP settings to "off" position. In the current (default) position of "off high" these
contacts are all correctly enabled through logic formulae in the relay type model.
2. It is not clear from the relay manual if the high set element starters could also enable the "start"
output through contacts K1..K3. It was therefore assumed to be the case.
3. The available current settings differ for RACID relays. Relays may have one or two measuring
ranges. Measuring ranges were therefore modelled for the wider range.
4. RACID relay models were prepared for all possible rated current combinations available.