Professional Documents
Culture Documents
Experimental Procedures
Experimental Procedures
0 EXPERIMENTAL PROCEDURE
Students were provided with 8 specimens, which have been heat treated under the following
conditions. Student were required to observe the microstructure under the optical microscope
and record the data obtain.
Ferrous Alloy
Specimen 1 (X17) - 0.8% carbon steel, rolled bar, heated for 1 hour at 800 C, furnace
cooled(annealed) to room temperature.
Specimen 2 (X18) - 0.8% carbon steel, rolled bar, heated for 1 hour at 800 C, cooled in still
air (normalized).
Specimen 3 (X19) - 0.35% carbon steel bar, furnace cooled from 870 C.
Specimen 4 (X20) - 1.3% carbon steel bar, furnace cooled from 970 C.
Non-Ferrous Alloy
Specimen 8 (X14) - Aluminium / 4% copper alloy, sand cast, heated at 525-degree C for
16 hours and then water quenched.
Specimen 9 (X15) - Aluminium / 4% copper alloy, sand cast, heated at 525-degree C for
16 hours and then water quenched, reheated at 260-degree C for 70
hours.