This document provides dimensions for an assembly, tong, 5500-18K7. Key details include:
- Maximum width is 31 7/8 inches
- Maximum length is 53 5/8 inches with the door closed and 57 5/8 inches with the door open
- Maximum height is 46 3/8 inches
- Various revisions and part numbers that have been added and removed are noted
- Proprietary statement indicates the document is confidential property of McCoy Corporation
This document provides dimensions for an assembly, tong, 5500-18K7. Key details include:
- Maximum width is 31 7/8 inches
- Maximum length is 53 5/8 inches with the door closed and 57 5/8 inches with the door open
- Maximum height is 46 3/8 inches
- Various revisions and part numbers that have been added and removed are noted
- Proprietary statement indicates the document is confidential property of McCoy Corporation
This document provides dimensions for an assembly, tong, 5500-18K7. Key details include:
- Maximum width is 31 7/8 inches
- Maximum length is 53 5/8 inches with the door closed and 57 5/8 inches with the door open
- Maximum height is 46 3/8 inches
- Various revisions and part numbers that have been added and removed are noted
- Proprietary statement indicates the document is confidential property of McCoy Corporation
53 5/8" MAX LENGTH (DOOR CLOSED) 57 5/8" MAX LENGTH (DOOR OPEN)
46 3/8" MAX HEIGHT
27 11/16"
ECN REV. DESCRIPTION DATE APPROVED
REMOVED 1064-11(X1), 101-0150(X1), 101-0151(X1), 101-6157(X4), 101-6080(X4) 09/APR/2014 002272 1 SP & CE-HANDLE-2 AND ADDED 101- 1.23 6860(X1) & 101-6861(X1) 1500-09-03A(x1) & 1483-500-00-07(x1) 12/APR/2016 R. RAJIUR 1.50 002591 A WERE 101-6122 REMOVED 10-0010R(X1), 87-0110(X1), 997-A10-149(X1), 01-0317(X1), 09- 002609 B 0106(X2), 09-9155(X2), 09-5832(X2) 03/05/2016 SP ADDED 10-0084(X1), 101-8942(X1), 10- 9001(X1), 02-9022(X1), 02-0225(X2) UNLESS OTHERWISE SPECIFIED: PROPRIETARY STATEMENT 1. DIMENSIONS ARE IN INCHES THIS DOCUMENT IS THE PROPERTY OF MCCOY CORPORATION AND IS 2. TOLERANCES: CONSIDERED CONFIDENTIAL. THIS INFORMATION MAY NOT BE USED, ANGULAR 1 DISCLOSED, COPIED, OR REPRODUCED IN ANY FORM, WITHOUT THE FRACTIONAL 1/16 TWO PLACE DECIMAL 0.02 EXPRESS WRITTEN CONSENT OF MCCOY CORPORATION DESCRIPTION THREE PLACE DECIMAL 0.005 DRAWN R.RAHMAN 04/12/2016 3. IDENTIFY P/N & MATL PO. USING 1/8 TO 1/4 ETCHED LETTERS; DENOTED BY "X" ASSEMBLY, TONG, 5500-18K7 4. REMOVE BURRS & SHARP EDGES WITH CHECKED M.GERWING 04/12/2016 1/64x45 MAX SIZE PART NO. REV 80-0420-23 5. MACHINED FILLET RADII SHALL BE 1/32 6. FINAL SURFACE ROUGHNESS AVG. (Ra) APPROVED M.GERWING 04/12/2016 B B RELEASED FOR PRODUCTION SHALL BE ≤ 250 MICROINCHES 7. DENOTES CRITICAL DIMENSION; THIRD ANGLE WEIGHT MATERIAL 100% INSPECTION REQUIRED 8. A TRIANGLE DENOTES A REVISION PROJECTION 1092.95 LBS. SHEET 1 OF 2 9. INTERPRET DRAWING PER ASME Y14.5-2009 SOLIDWORKS DOCUMENT PRINTED ON: Friday, March 24, 2017