24476
B.Tech, 7th Semester (F) Scheme (ME) Examination,
December-2018,
STRENGTH OF MATERIAL-IL
Paper-ME-401-F
Time allowed: 3 hours] Masxinsum marks :100
Note : Attempt five questions intotal, selecting one question
from each of the four sections. Question no. 1 is
compulsory.
1. (Define modulus of resilience,
Gi) Define strain energy theory:
(Gi) Detine produet of Inertia,
(iv) Define circumferential or hoop stress in ease of
thin eylinder.
(9) Write Lamne's equation fr thick spherical vessel
(vi). Write down the circumferential stress developed
ina thin rotating cylinder.
(vil) What are the different types of leaf spring ?
(vii) Define ellipse of Inertia,
(Gs) What do you mean by concentric spring ?
(8) Define volumetric strain in case of thin
cylinder, 210-20
24476-P-3-0-9 18) IPT.Q) 24476
Section-A,
Explain the expression fr strain energy stored ina body
‘hen the load is appplid. 20
(Gradually applied load
Gi) Suddenty applied Toad
Gil) Load is applied with impact
According to the theory of maximum shear stress,
determine the diameter ofa bolt which is subjected to
‘an axial pull of KN together witha transeverse shear
force of 4.5 KN, Elastic limit in tension is 225 Nimm’,
factor of safety = 3 and Poisson's ratio= 0.3. 20
Section-B
[Explain the following tes is detail 20
(2) Shear centre and the flexural axis
(6) Slope of the natural axis
A boiler is subjected to an internal steam pressure of
2 Nimm?. The thickness ofthe boiler plate is 2.6 em
and the permissible tensile stress is 120 Nim, Find
‘out the maximum dlameter, when efficiency of
longitudinal joint is 90% and that of circumferential
joint is 40 %, 20
G
@ 24476
Section-C
Derive the expression for Lamne's equation for thick
cylindrical shel, 20
A steel dise of uniform thickness and of diameter 90
mm is rotating about its axis at 3000 rpm. Determine
the radial and circumferential stresses at the centre
and the outer radius. The density of the material is
7800 kg/m? and Poisson ratio= 0.3 20
Section-D
(Location of neutral axis,
Gi) Maximum and minimum stresses,
when a curved beam of rectangular cross section of
width 20mm and of depth 40 mm is subjected to
pure bending of moment +600 N.m. The beam is curved
inva plane pavallel co depth. Radius of curvature is
50mm, 20
Explain in detail
(Open coiled helical spring subjected to axial load
Gi) Leafsprings 20