Professional Documents
Culture Documents
Which of The Following Is The Command Coed To Move The Tool in The Clockwise Direction?
Which of The Following Is The Command Coed To Move The Tool in The Clockwise Direction?
The depth that the tool is plunged into the surface is called as ______
a) feed
b) depth of cut
c) depth of tool
d) working depth
Write a part program manually to mill the edge of the plate as shown in figure. The
dimensions are in millimeters. Assuming the raw material is in rectangular form with
thickness of 15 mm. Take the bottom face as z offset:
which of the following is the command coed to move the tool in the clockwise
direction?
o A.
G01
o B.
G02
o C.
G03
o D.
G17
G02 is code for ----------------------------------12.
The G-code for rapid traverse is -----------------13.
G42 is the code for ------------------------------14.
M30 is the code for ---------------------------------
The M-code for spindle stop is