Professional Documents
Culture Documents
If there is any anomaly on the HT of a specific batch/item - this one shall be No any descrepency observed yet. In case of anomaly WIF can
1 - -
marked and traced. mark and trace the batch
Procedure or Work instruction for systematically Quenching media analysis to be Frequency of quenching oil and water testing is once in six months. Refer reports
2 Refer Attachment WI-HT-04
done - details to be shared attached.
4 All Calibration reports of heat tretment process validation Calibration reports of heat treatment furnace enclosed Enclosed in Attachment Ann-A
Heat Treatement is carried out on the clean forgings. Generally Quenching and
5 Work instructions with criteria for Forging cleaning-with evidenced -
tempering is carried out after rough machining.