Professional Documents
Culture Documents
The Reinforcing Steel Bar is a hot rolled steel product, with circular section, or nearly circular, with a
minimum of 2 reinforcement traversal lines, this lines are uniformly distributed on all the length. We
produce the bars under the DIN 488 Standard and we provide you with the 3.1.B and International
Certification (DNV, BV, GL, …)
We perform laboratory tests following the corresponding international standard and we also agree with the
customer the specific tests and inspections that must be performed to the product.
Dimensions
Production and delivery possibilities
2
Diameter (mm) Cross section (cm )
8 0,50
10 0.79
12 1.13
14 1.54
16 2.01
18 2.54 Lengths 10 - 18 m
20 3.14
22 3.80
25 4.91
28 6.16
32 8.04
• OTHER DIMENSIONS OR GRADES, PLEASE CONTACT US., all the bars will be delivered with the right
markings to identify them (heat number, dimensions, material, …)
Yield Tensile
Steel Elongation
Standard Strenght Strenght Relation Chemical Composition max %
Grade (%)
(N/mm2) (N/mm2)
C P S N
DIN-488 BST500S 500 550 1,08 10 0,24 0,055 0,055 0,013
• This material could be provided with other international certifications, normally we provide
it with Germanischer Lloyd.
C P S Mn
GB1449 HRB500 500 630 12 0,25 0,045 0,045 1,6
• Chinese Standard.
• OTHER DIMENSIONS OR GRADES, PLEASE CONTACT US.
www.islasglobal.com Tlf +34986442607 Fax +34986442215 Policarpo Sanz 6, 3º A, 36201 Vigo (Spain)
Document annexed to the product:
With the final product you could get the following documents:
• All this documents are included in the L/C agreement and on the contract.
• The price may change according with the documents and tests.
- Crystalline Microstructure
- Surface Test
- Hardness
- Impact
- Welding
- Bending
- Etc…
www.islasglobal.com Tlf +34986442607 Fax +34986442215 Policarpo Sanz 6, 3º A, 36201 Vigo (Spain)