Professional Documents
Culture Documents
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrade
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a Hot fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D
Hot fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular Hot fix release of a product, see the following PDS 3D Version Fixes charts.
Please note that each Hot fix release contains all fixes made in a previous Hot fix release.
FRAMEWORK PLUS 12.01.00.12 XP/2000/Win7/Win10 1/10/2018 TR#PB203653 Fixed issues with CIMSteel imp
DS 3D needs to export the added port on the header pipe of reinforcement weld and reinforcement
pad branches..
DS 3D needs to Export ports of CableTrays and Cabletray Components.
DS 3D needs to export the added port on the header pipe of Olet family.
DS 3D needs to Export connected Nozzles along with PipeRuns in Piping output for As-Built workflows.
DS 3D needs to Export Tap ports as a seperate entity type than being a regular Piping Port instance..
Use SPRB.exe delivered byt Intergraph Smart Interop Publisher (ISIP) if it is installed on the machine.
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrad
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a Hot fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D
Hot fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular Hot fix release of a product, see the following PDS 3D Version Fixes
Please note that each Hot fix release contains all fixes made in a previous Hot fix release.
PD_REVIEW 12.01.00.14 XP/2000/Win7 1/28/2016 HF#PB 167030- Some Weld graphics does not display
PD_XPDA 12.01.00.02 XP/2000/Win7 10/5/2015 TR#PB 164656- ISO
In RDBlines generated
Conflict withthe
Report, XPDA is mis
model an
PD_DATA 12.00.01.14 XP/2000/Win7 8/31/2015 in v12.0 COM
TR#PB 165435- BATCH: as were displayed in v8.0.
API get_DayNth return
BATCH 06.01.09.00 XP/2000/Win7 11/5/2014 TR#PB 150876-
PD_ISO 12.00.01.25 XP/2000/Win7 6/15/2016 TR#PB 174230 - Requires ISOGEN version 12.1.0 (B
12.00.01.24 XP/2000/Win7 5/26/2016 TR#PB 182592 - setting Intergraph option 18 to 4.
12.00.01.23 XP/2000/Win7 2/24/2016 TR#DM 170443 - Requires ISOGEN version 12.1.0 (B
TR#PB 170159 - Requires ISOGEN version 12.1.0 (B
TR#PB 174649- Isometric drawing.
TR#PB 174833 - dimension gets drawn on the isome
12.00.01.22 XP/2000/Win7 11/6/2015 TR#PB 168452 - even its weld type was set to no we
12.00.01.21 XP/2000/Win7 10/15/2015 TR#PB 167031 - support missing and smaller reduce
TR#PB 167416 - Case Specific: Component mapped 'F
12.00.01.20 XP/2000/Win7 8/21/2015 TR#PB 165501 -
DM#PB 152241 - header pipe at the Weldolet.
12.00.01.19 XP/2000/Win7 6/15/2015 TR#PB 161558 - Requires ISOGEN version 12.0.1 (B
DM#PB 162944 - Requires ISOGEN version 12.0.1 (B
12.00.01.18 XP/2000/Win7 5/8/2015 TR#PB 161481 - even Atext -282 was turned on in th
12.00.01.17 XP/2000/Win7 4/7/2015 DM#PB 159314 - Requires ISOGEN version 12.0.1 (B
DM#PB 159378- segment data table.
TR#PB 159788 - Requires ISOGEN version 12.0.1 (B
12.00.01.16 XP/2000/Win7 11/21/2014 TR#PB 150188 - Requires ISOGEN version 11.2.1 (B
TR#PB 151484 - Requires ISOGEN version 11.2.1 (B
TR#PB 151812 - Requires ISOGEN version 11.2.1 (B
TR#PB 151870 - Requires ISOGEN version 11.2.1 (B
TR#PB 151948- Requires ISOGEN version 11.2.1 (B
TR#PB 152459 - Requires ISOGEN version 11.2.1 (B
12.00.01.15 XP/2000/Win7 6/5/2014 TR#PB 149050 - are not hot-spottable in the isome
TR#PB 149828 - has exceeded the maximum" even Int
12.00.01.14 XP/2000/Win7 4/14/2014 TR#PB 148415 - Case Specific: PD_ISO crashes with
PD_ISOGEN 12.00.01.25 XP/2000/Win7 6/15/2016 TR#PB 174230 - Requires ISOGEN version 12.1.0 (B
12.00.01.24 (No version developed)
12.00.01.23 XP/2000/Win7 2/24/2016 TR#DM 170443 - Requires ISOGEN version 12.1.0 (B
TR#PB 170159 - Requires ISOGEN version 12.1.0 (B
12.00.01.22 (No version developed)
12.00.01.21 (No version developed)
12.00.01.20 (No version developed)
12.00.01.19 XP/2000/Win7 6/15/2015 TR#PB 161558 - Requires ISOGEN version 12.0.1 (B
DM#PB 162944 - Requires ISOGEN version 12.0.1 (B
12.00.01.18 (No version developed)
12.00.01.17 XP/2000/Win7 4/7/2015 DM#PB 159314 - Requires ISOGEN version 12.0.1 (B
TR#PB 159788 - Requires ISOGEN version 12.0.1 (B
12.00.01.16 XP/2000/Win7 11/21/2014 TR#PB 150188 - Requires ISOGEN version 11.2.1 (B
TR#PB 151484 - Requires ISOGEN version 11.2.1 (B
TR#PB 151812 - Requires ISOGEN version 11.2.1 (B
TR#PB 151870 - Requires ISOGEN version 11.2.1 (B
TR#PB 151948- Requires ISOGEN version 11.2.1 (B
TR#PB 152459 - Requires ISOGEN version 11.2.1 (B
12.00.01.15 XP/2000/Win7 6/5/2014 TR#PB 149050 - are not hot-spottable in the isome
12.00.01.14 (No version developed)
PD_SHELL 12.00.01.18 XP/2000/Win7 4/7/2016 HF#PB176216/ When two or more PDS Equipment do
CR#173756 will display the wrong object inform
12.00.01.17 XP/2000/Win7 7/24/2015 TR#PB162995/ Added new option ‘Find Documents to
CR#152952 This command searches the asso
that were deleted from the PDS p
12.00.01.16 XP/2000/Win7 5/13/2014 TR#PB 152315-
HF#PB148252/ Added new option ‘Find Documents to
DM#151299 This command searches the asso
that were deleted from the PDS p
12.00.01.15 Was renumbered to 12.00.01.16 components are not hotspotable w
12.00.01.14 XP/2000/Win7 5/13/2014 TR#PB 148991- Server OS or Windows 2012 Serv
PD_EQUIPMENT 12.00.01.14 XP/2000/Win7 7/1/2014 TR#PB 150928- placed with the UD (manual input)
PD_DESIGN 12.00.01.14 XP/2000/Win7 11/24/2015 TR#PB 168504-
leases 12.0.1
When two or more PDS Equipment documents, are merged into a composite 3D document, some of the equipment
will display the wrong object information when viewed with View and Markup or View in SmartPlant Review.
Added new option ‘Find Documents to Terminate’ to the Material Data and SmartPlant Publisher interface.
This command searches the associated SPF Plant for any documents (models, drawings, or reports)
that were deleted from the PDS project after being published.
Added new option ‘Find Documents to Terminate’ to the Material Data and SmartPlant Publisher interface.
This command searches the associated SPF Plant for any documents (models, drawings, or reports)
that were deleted from the PDS project after being published.
components are not hotspotable when published to Foundation.
Server OS or Windows 2012 Server OS.
placed with the UD (manual input) option.
e equipment
Review.
Summary of Latest PDS 3D Software Versions for releases 12.0
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrad
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a Hot fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D
Hot fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular Hot fix release of a product, see the following PDS 3D Version Fixes
Please note that each Hot fix release contains all fixes made in a previous Hot fix release.
BATCH SERVICES 06.01.04.00 XP/2000/Win7 3/13/2012 HF#PB -126681 Batch Services crashes when submitt
06.01.02.00 XP/2000/Win7 9/29/2011 HF#PB -122527 Scheduled batch job properties is wro
HF#PB -122605 The permissions level for qmgr.exe is
SUPPORT MODELER 12.00.00.12 XP/2000/Win7 3/1/2012 HF#PB 127728 -
TR#PB 102569 -
TR#PB 111073 -
TR#PB Support loses connection to pipe if re
120660 /HF not attached or visible.
120661 -
TR#PB 124268 -
TR#PB 126041 -
TR#PB 127645 -
12.00.00.11 XP/2000/Win7 9/1/2011 TR#PB 102569 -
TR#PB 111073-
TR#PB 120660/ -
HF 120661
TR#PB 124268-
PD_ISO 12.00.00.27 XP/2000/Win7 11/11/2013 TR#PB 142976 - configuration.
12.00.00.26 XP/2000/Win7 7/9/2013 TR#PB 138488 - pipe and nozzle that was placed wit
TR#PB 138492 - Size dependent implied item is duplic
12.00.00.25 XP/2000/Win7 4/1/2013 TR#PB8722/ 1335Implemented new value 2 for Intergra
0 Do not report mating implied com
12.00.00.24 (No version developed) items.
12.00.00.23 XP/2000/Win7 2/10/2013 CR#PB 132029 -
12.00.00.20 XP/2000/Win7 2/10/2012 TR#PB 126535 - 1 Report mating implied componen
12.00.00.19 XP/2000/Win7 12/2/2011 CR#PB 125556 - items while nomto flag and owne
12.00.00.18 XP/2000/Win7 9/1/2011 CR#PB 122738 -
PD_ISOGEN 2 Report mating implied componen
12.00.00.27 (No version developed)
status as the combination of 'Exis
12.00.00.26 (No version developed)
12.00.00.25 (No version developed) Notes:
12.00.00.24 (No version developed) It is 'Existing' when the codelist value
12.00.00.23 XP/2000/Win7 2/10/2013 TR#PB 133223 - value is 5, for the standard note 130
12.00.00.20 (No version developed)
12.00.00.19 XP/2000/Win7 12/2/2011 TR#PB 124368 -
TR#PB 125744 -
12.00.00.18 XP/2000/Win7 9/1/2011 TR#PB 123989 -
PD_SHELL 12.00.00.19 XP/2000/Win7 11/17/2011 TR#PB125684/ Program returns area not found error
HF 125685- file (.sel) that was created in a previo
PD_ORTHO 12.00.01.01 XP/2000/Win7 12/2/2011 TR#PB 124497 - list of piping areas.
TR#PB 124987 -
TR#PB 124728 -
PD_STRESS 12.00.00.18 XP/2000/Win7 3/20/2012 TR#PB127863 In order to have PROP records, chan
PD_XPDA 12.00.00.05 XP/2000/Win7 4/25/2013 TR#PB136685 Designin caesarii.cde and pdstress.tbl.
Review session Th
fails for some
mapping in triflex.cde and adlpipe.c
PD_CLASH 12.00.00.18 XP/2000/Win7 6/4/2013 TR#PB137887 Program does not include the insulati
PD_REPORT 12.00.00.19 XP/2000/Win7 2/12/2014 TR#PB145294 New insulation
optionthickness was defined
to use commodity and
code fr
Interference
commodity Checker
code tableData.
TR#PB126314/ Fixed problem with BolttoCommodity
get bolts deC
DM 126770 MDP_OVERRIDE_SOURCE_BOLT_
system commodity code descrip
TR#PB144058 Program also truncates
for this fix.)0.
the long material d
than the limit.
leases 12.0
configuration.
pipe and nozzle that was placed with different table suffix.
Size dependent implied item is duplicated 4 times on MTO of ISO.
mplemented new value 2 for Intergraph Option 81 as follows.
0 Do not report mating implied components between two 'Existing'
items.
Notes:
It is 'Existing' when the codelist value is 3, 'Relocate' when the codelist
value is 5, for the standard note 130: construction status.
Program returns area not found error when open an existing selection
file (.sel) that was created in a previous MDP job with selecting a
list of piping areas.
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrad
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a Hot fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D
Hot fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular Hot fix release of a product, see the following PDS 3D Version Fixes charts.
Please note that each Hot fix release contains all fixes made in a previous Hot fix release.
PD_SHELL 11.00.01.12 XP/2000/Win7 5/27/2015 TR#PB 162523- Program incorrectly update rece
11.00.01.11 XP/2000/Win7 7/11/2014 TR#PB 148252- 1. If clash is approved or review
approval manager, this colum
11.00.01.10 XP/2000/Win7 4/22/2013 HF 136650- Runtime
insteaderror in Publishing
it gets updated toIsomthe
11.00.01.09 XP/2000/Win7 5/25/2012 HF 128269- for
After drawing
2. If using
clash the index number.
Segment
is approved I/Form
from list,
11.00.01.08 XP/2000/Win7 2/3/2012 HF 127197- had
The gadgets which had been o
EERWAY_USE_PDS_OVE
11.00.01.07 XP/2000/Win7 1/12/2012 HF 126314- Fixed problem with Bolt Commo
11.00.01.06 XP/2000/Win7 11/16/2011 HF 125685- Program returns area not found
11.00.01.05 XP/2000/Win7 7/14/2011 DM 122664/ file (.sel)
The MDP that was created
scheduled job may in afaip
TR122663- was not correctly updated f
11.00.01.04 XP/2000/Win7 6/13/2011 HF#PB 122439- Additional
Program returnschanges were al
error "Unable to
11.00.01.03 XP/2000/Win7 2/10/2011 HF#PB 120108- scheduled
Program MDP "Error
returns job with a Race
Initializin
11.00.01.02 XP/2000/Win7 12/15/2010 TR#PB 116078- Access Control Manager incorre
TR#PB 115841- Corrected the following mapping
TR#PB 115495- Updated PDS to SPF configurat
TR#PB 113371- SPFConfiguration.xls
Sample for details
data requires updated m
TR#PB 110309- We created a Citrix variable to b
TR#PB 91770- Case Specific: CP0 is missing in
TR#PB 95178- used. error Torus radius is gre
Getting
TR#PB 73261- wheel.to place a mixed end elbo
Trying
PD_STRESS 11.00.01.06 XP/2000/Win7 3/26/2015 TR#PB159296/ error Component
Creating Center
stress neutral fileisgives
not o
TR#PB117421 which is connected to a nozzle
11.00.01.05 XP/2000/Win7 6/6/2012 TR#PB130045 Component Node Number great
11.00.01.04 XP/2000/Win7 3/20/2012 TR#PB127863 In order to have PROP records,
11.00.01.03 XP/2000/Win7 3/1/2011 TR#PB 120445 in caesarii.cde
a large numberand pdstress.tb
of pipe suppor
mapping in triflex.cde and adlp
11.00.01.02 XP/2000/Win7 12/7/2010 TR#PB -
RD_USRDB 11.00.01.02 XP/2000/Win7 12/6/2010 TR#PB 100752-
TR#PB 61892- Underground Eccentric Reducer
SUPPORT MODELER 11.00.01.04 XP/2000/Win7 3/1/2011 TR#PB 132377 -
11.00.01.03 XP/2000/Win7 3/1/2011 TR#PB 120661 -
11.00.01.02 XP/2000/Win7 12/10 TR#PB
FWPLUS 11.00.01.02 XP/2000/Win7 12/7/2010 TR#PB 113136 -
TR#PB 111179 -
TR#PB 99421 -
TR#PB 99430 -
TR#PB 97662 -
TR#PB 97397 -
TR#PB 96809 -
TR#PB 96705 -
TR#PB 96300 -
TR#PB 92135 -
TR#PB 88032 -
TR#PB 81354 -
TR#PB 114490 / TR Copy with overrides isnt working
114629 -
TR#PB 114366 / TR Using the manual option when p
114450 -
TR#PB 114315 / TR provide FPL to Batch open the m
114327 -
Model specific > Program does not load complete model into ee schema.
Getting error 'sheet name can not be duplicated' while loading same file & sheet.
Program incorrectly lists the dgn files in the Load Database form.
When labels are placed automatically, when tray/conduit is being placed,
the
Label label will
problem notmax
with move when
entry user uses Move
in ee_part_key Vertex command.
column.
BOM by Volume Fails.
Batch 6 fails with home directory error in event log.
Program incorrectly update recent_review_date column in pdtable_132:
1. If clash
Program is approved
does or the
not include reviewed inside
insulation the model
in the or through
envelope creationinterference
of the equipment
approval manager, this column does not get updated to the current time but
Project specific: VISTA only: Clash is hanging.
instead it gets updated to the same time as completion_date in pdtable_131.
Duplicate
2. If clash'unique' clash from
is approved id forlist,
HVACthis ducts
columnwith insulation.
does not updated.
Case Specific: Schedule Envelope Build/Clash Detect Cmd
fails for
RDB known
Conflict warnings
report. Metric Project, Metric Specs. Model data
RDB conflict report incorrectly outputs discrepancies between the
model and the reference data for schedule thickness on the weld neck
Caseflange when
Specific: connected
RDB Conflict to a reducing
Report item.outputs discrepancies
incorrectly
between the flange and the reference data when there is a spec break
Codebetween
List 400the
willflange and instrument.
not verify
Program incorrectly update recent_review_date column in pdtable_132:
1. If clash
When is approved
approving or reviewed
pipelines inside the
through Approval modelManager,
Control or throughif interference
one of
approval manager, this column does not get updated to the current time but
Case specific: Unable to copy custom supports.
instead it gets updated to the same time as completion_date in pdtable_131.
Case specific:
2. If clash program assigns
is approved from list,duplicated
this columnuser-defined field weld number.
does not updated.
When using SPPID to PDS 3D data transfer, the SPPID file translated into a
Microstation
Review Tags isfile
Notis Working
not named correctly.
correctly for coordinates near Integer extremes
SPPID to PDS 3D Data Transfer problem: If the SPPID name exceeds 24 characters,
PD_Design
SPPID to PDSmay crash.Transfer
3D Data NOTE:problem:
To display a SPPID
If the SPPIDdrawing
path + in PD_Design
SPPID the name
name exceeds
the 80
When character
using SPPIDlimit, the 3D
to PDS SPPID
datafile will failthe
transfer, to display
SPPID inside
file translated into a
PDS2D to PDS 3D Data Transfer problem: Selecting Load from P&ID from the
Place Component form causes the software to crash.
labels commands
Missing thread symbol on one side of FTE coupling.
Requires ISOGEN version 12.0.1 (Build 106).
Case Specific: 2 FFW. Extra length of pipe not showing on MTO of ISO.
Ingr Switch 62 = 100, ISOGEN Switch 22 = 150.
Requires ISOGEN version 12.0.1 (Build 83).
When setting PDISOFONT to 106, all rectangular enclosures on the iso
drawing have lots of extra spaces to the right of the data.
nRequires
a specificISOGEN
case where a reducing
version Tee is 88).
11.2.1 (Build the continuation item,
the dotted graphic of the branch of the Tee is not shown on the
NGR Switch 71
iso drawing = 12continuation
of the or 22 causes the ISO to fail when the
line.
first component
Requires ISOGEN scanned is a FSW
versionIsogen socket
11.2.1 (Build welded flange.
82).
Case specific,
Requires when setting
ISOGEN version 11.2.1 option 9 to 3 or 4, program
(Build 82).
outputs corrupted slope labels, tag numbers and dimension labels
Case
on thespecific: Output orientation changes when nipples are
iso drawing.
replaced
Requires with pipes.
ISOGEN
Report correct
Requires weightversion
ISOGEN on ISO11.2.1
version MTO (Build
11.2.1
82).
(Build 76).
has exceeded the maximum" even Intergraph option 18 was set to 4.
pipe and nozzle that was placed with different table suffix.
Case specific:
Corrected Sheetinconsistencies
isometric continuation notwith
shown for a bypass line.
dimensioning.
Requires ISOGEN version 9.2.0 (Build 30).
Missing thread symbol on one side of FTE coupling.
Requires ISOGEN version 12.0.1 (Build 106).
Case Specific: 2 FFW. Extra length of pipe not showing on MTO of ISO.
Ingr Switch 62 = 100, ISOGEN Switch 22 = 150.
When setting
Requires PDISOFONT
ISOGEN versionto12.0.1
106, all rectangular
(Build 83). enclosures on the iso
drawing have lots of extra spaces to the right of the data.
nRequires
a specificISOGEN
case where a reducing
version Tee is 88).
11.2.1 (Build the continuation item,
the dotted graphic of the branch of the Tee is not shown on the
NGR Switch 71
iso drawing = 12continuation
of the or 22 causes the ISO to fail when the
line.
first component
Requires ISOGEN scanned is a FSW
versionIsogen socket
11.2.1 (Build welded flange.
82).
Case specific,
Requires when setting
ISOGEN version 11.2.1 option 9 to 3 or 4, program
(Build 82).
outputs corrupted slope labels, tag numbers and dimension labels
Case
on thespecific: Output orientation changes when nipples are
iso drawing.
replaced with
Requires ISOGEN pipes.version 11.2.1 (Build 82).
Requires ISOGEN version 11.2.1 (Build 76).
PD_ISOGEN *.prt files no longer have blank lines between the
MTO items.
Requires ISOGEN version 11.2.1 (Build 64).
Requires ISOGEN version 11.2.0 (Build 67).
Case specific:
Corrected Sheetinconsistencies
isometric continuation notwith
shown for a bypass line.
dimensioning.
Requires ISOGEN version 9.2.0 (Build 30).
When copying an equipment model to a new equipment model, the program will set the
symbology of equipment in the copied model to the symbology of Insulation Envelope
Manual Project Creation and Insert Electrical Raceway, do not Update rwysdz.dgn
Program hangs at random model when running MDP with project option,
piping discipline option or with a combination of some piping areas.
so mating behavior option in Material Data Publisher does not
respect the ownership of implied material that user set in the model.
Material Data Publisher returns application error on a specific piping model.
Case specific, MDP publishes incorrect bolt lengths to pdtable_120.
MDP does not report bolts and gasket for the connection between lap
joint flange and nozzle or between lap joint flange and specialty
Program
item.truncates the long material description even it is shorter
than the limit.
Case specific, when running MDP on user's project with selecting
on Publish Standard Notes option, the program keeps publishing
Fixeddata
problem with Bolt Commodity
into pdtable_250 Code Table
and generates reporting
millions incorrectly
of entries in this the system commodity
code description. (Need PD_Shell 11.00.01.07 or later also for this fix.)
MDPtable. User has
and Report to terminate
behaves differentthe
forMDP job toGasket
reporting stop this process.
commodity code.
When Bolt Commodity Code is set to use bolt commodity code table, MTO report gets the
Program returns "Error Initializing Raceways Reference database schema" when opening
Nut dimensions shown in incorrect units in PD_REPORT.
Case Specific : Program crashes when running report with a set of 6 user's models.
Mto does not load areas if the names ends with "_" character.
Case Specific : PD_Report crashing when discrimination criteria is AREA.
ncorrect COG in pdtable_170 for modified COG in Support Eden.
Embedded label does not call the npd for gasket of instru + instrument.
With the enhancement in version 8.0.1.12 (TR PB107656), embedded label
will call the npd of piping component to the short material description
of thespecific:
Project gasket. MDP:
If it isunable
a reduced component,
to report gasket program
between will output
nozzle the
& Flange.
ndp from the design database for the cp1 correctly. For any other
Weld Graphics
connect are
point, not added
program usesatthe
Model
npd Boundaries.
from cp1 which is incorrect.
Unable to create labels for an EQP model which has extended attributes.
DRV's are not being created for HVAC models.
Design Review Scheduled Label Builder deletes the file specification created
during scheduling after the first run.
Case specific :- Design Review session aborts for a raceway design area.
Using the manual option when placing cutouts on MSTN itmes doesnt work
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrad
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a Hot fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D
Hot fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular Hot fix release of a product, see the following PDS 3D Version Fixes
Please note that each Hot fix release contains all fixes made in a previous Hot fix release.
PD_DESIGN 11.00.00.11 XP/2000 6/23/2010 TR#PB 114617-Corrected situation where extending pipe
11.00.00.10 XP/2000 6/8/2010 TR#PB 114225-Pipe will not extend when using PDS_SO
TR#PB 89525 This TR was a WAD. The software func
11.00.00.09 XP/2000 should have
2/5/2010 TR#PB 112200-Selecting been
‘Load made
From for is
P&ID’ this TR. p
crashing
PD_SHELL 11.00.00.11 XP/2000 upgraded from v7.3 to v10 and
9/24/2010 TR#PB 116078-Access Control Manager incorrectly allow v11
11.00.00.10 XP/2000 9/1/2010 TR#PB 115495-Updated PDS to SPF configuration files.
TR#PB 115841 Corrected the following mappings in deliv
1) Equipment division
2) Heat tracing requirements
3) Raceway systems.
11.00.00.09 XP/2000 3/31/2010 TR#PB 113371-Type 63 element does not have the info
RD_USRDB 11.00.00.09 XP/2000 3/31/2010 TR#PB 110494-Sample data requires updated models fo
100752
PD_ISO 11.00.00.14 XP/2000 9/13/2010 TR#PB 115578-Case Specific: Orientation tag displays th
11.00.00.13 XP/2000 8/16/2010 TR#PB 114780-Isoforoutputs
eccentric reducer.
incorrect elevation at the cap
11.00.00.12 XP/2000 7/22/2010 TR#PB 114823-Unable to report more than 6 Chinese C
11.00.00.11 XP/2000 8/17/2009 TR#PB 114497- Fixed problem with tee on orifice flange
11.00.00.10 XP/2000 5/11/2010 TR#PB 113593-Case specific: ISO not displaying proper
Requires
TR#PB 113893-Case ISOGEN
specific: ISO notversion 10.0.0
displaying (Buil
"Cont.
11.00.00.09 XP/2000 Requires ISOGEN version 10.0.0
4/14/2010 TR#PB 110663-Fixed problem with coordinates overlapp (Buil
TR#PB 110720-Fixed problem with dimensions askew an
TR#PB 112964-Isometric fails when coupling (CPLGE) is
PD_ISOGEN 11.00.00.14 No version needed Requires ISOGEN version 9.3.0 (Build
11.00.00.13 XP/2000 8/16/2010 TR#PB 114780-Iso outputs incorrect elevation at the cap
11.00.00.12 No version needed configuration.
11.00.00.11 No version needed
11.00.00.10 XP/2000 5/11/2010 TR#PB 113593-Case specific: ISO not displaying proper
TR#PB 113893-Case specific: ISO not displaying "Cont.
11.00.00.09 XP/2000 Requires
4/14/2010 TR#PB 110663-Fixed ISOGEN
problem version 10.0.0
with coordinates (Buil
overlapp
Requires ISOGEN version 9.3.0 (Build
TR#PB 110720-Fixed problem with dimensions askew an
TR#PB 112964-Isometric fails when coupling (CPLGE) is
FRAMEWORKS 11.00.00.09 XP/2000 Requires
3/31/2010 TR#PB 113136-Incorrect ISOGEN
values version
reported for 9.3.0 (Build
Unit Weight
BATCH SERVICES 06.00.00.06 XP/2000 4/28/2010 TR#PB 29492-
CR#PB 96641-
CR#PB 87374-
CR#PB 113275-Provide "Run Now" option for recurring jo
CR#PB 95620-
PD_XPDA 11.00.00.09 XP/2000 8/11/2010 TR#PB 115491-
PD_XPDA 11.00.00.08 XP/2000 3/8/2010 TR#PB 104713
PD_REVIEW 11.00.00.10 XP/2000 8/31/2010 TR#PB 115502-DRV's are not being created for HVAC m
TR#PB 115585-Unable to create labels for an EQP mode
11.00.00.09 XP/2000 7/30/2010 TR#PB 114896-Design Review Scheduled Label Builder
TR#PB 112177-Customer Specific: PD_Review crashes
TR#PB 112234-Case specific :- Design Review session a
EERWAY 11.00.00.09 XP/2000 10/27/2010 TR#PB 117066-Program populates wrong ee_ol_length
1002 when using metric spec in an Eng
releases 11.0
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrad
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a Hot fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D
Hot fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular Hot fix release of a product, see the following PDS 3D Version Fixes
Please note that each Hot fix release contains all fixes made in a previous Hot fix release.
PD_ISO 10.00.00.32 XP/2000 4/14/2014 TR#PB 130905 Requires ISOGEN version 11.1.0 (Bui
TR#PB 131622 Requires ISOGEN version 11.1.0 (Bui
TR#PB 131885 Requires ISOGEN version 11.1.0 (Bui
TR#PB 132109 Requires ISOGEN version 11.1.0 (Bui
TR#PB 132309 Requires ISOGEN version 11.1.0 (Bui
TR#PB 133700 the drawing and DoubleBack Pipe Err
TR#PB 134681
TR#PB 135895
TR#PB 138317 Case Specific: Wrong weld type on red
TR#PB 139183 Requires ISOGEN version 11.2.1 (Bui
TR#PB 139475 numbers for the branch with using dat
TR#PB 140396 Requires ISOGEN version 11.2.1 (Bui
TR#PB 140400 by the header.
TR#PB 142129 section to the Intermediate Data File(.
TR#PB 144230 Requires ISOGEN version 11.2.1 (Bui
TR#PB 148529/1Report correct weight on ISO MTO.
10.00.00.31 XP/2000 4/6/2012 TR#PB 127780
10.00.00.30 XP/2000 12/2/2011 TR#PB 125744
10.00.00.29 XP/2000 11/21/2011 TR#PB 125652
10.00.00.28 XP/2000 9/19/2011 TR#PB 124368
10.00.00.27 XP/2000 8/30/2011 TR#PB 124417
10.00.00.26 XP/2000 8/22/2011 TR#PB 124203
10.00.00.25 XP/2000 6/27/2011 TR#PB 122156
TR#PB 122157
10.00.00.24 XP/2000 3/18/2011 TR#PB 119841
10.00.00.23 XP/2000 3/9/2011 TR#PB 120664
10.00.00.22 XP/2000 2/17/2011 TR#PB 118947
TR#PB 119434 Requires ISOGEN version 10.2.0 (Bui
TR#PB 119832 Requires ISOGEN version 10.2.0 (Bui
10.00.00.21 XP/2000 1/20/2011 TR#PB 119433-Fixed problem with operator callout whe
is displayed
TR#PB 117369-Case Specific:at the same
Missing Cuttime.
List number
10.00.00.20 XP/2000 8/16/2010 Requires ISOGEN version
TR#PB 114780-Iso outputs incorrect elevation 10.1.0
at the(Bui
cap
10.00.00.19 XP/2000 6/11/2010 TR#PB 114823-Unable to report more than 6 Chinese C
10.00.00.18 XP/2000 6/11/2010 TR#PB 114497-Fixed problem with tee on orifice flange
10.00.00.17 XP/2000 5/11/2010 TR#PB 113593-Case specific: ISO not displaying proper
Requires
TR#PB 113893-Case ISOGEN
specific: ISO notversion 10.0.0
displaying (Bui
"Cont.
Requires
TR#PB 114227-Fixed ISOGEN
problem version
with valve 10.0.0not
operator (Bui
b
10.00.00.16 XP/2000 4/14/2010 TR#PB 112964-Isometric fails when coupling (CPLGE) i
10.00.00.15 XP/2000 12/18/2009 TR#PB 110666- Requires ISOGEN version 9.3.0 (Build
10.00.00.14 XP/2000 12/1/2009 TR#PB 110724- Requires ISOGEN version 9.3.0 (Build
10.00.00.13 XP/2000 10/9/2009 TR#PB 109416- Requires ISOGEN version 9.3.0 (Build
10.00.00.12 XP/2000 9/21/2009 TR#PB 108877- Requires ISOGEN version 9.3.0 (Build
TR#PB 109293
10.00.00.11 XP/2000 8/17/2009 TR#PB 107892 Requires ISOGEN version 9.3.0 (Build
10.00.00.08 XP/2000 7/8/2009 TR#PB 107893 Requires ISOGEN version 9.2.0 (Build
TR#PB 107894 Requires ISOGEN version 9.2.0 (Build
TR#PB 107895 Requires ISOGEN version 9.2.0 (Build
10.00.00.06 XP/2000 6/5/2009 TR#PB 107896 Requires ISOGEN version 9.2.0 (Build
TR#PB 107897 Requires ISOGEN version 9.2.0 (Build
10.00.00.03 3/12/2009 TR#PB 107898
TR#PB 107899 Iso fails for a skewed pipeline having a b
PD_ISOGEN 10.00.00.32 XP/2000 4/14/2014 TR#PB 130905 Requires ISOGEN version 11.1.0 (Bui
TR#PB 131622 Requires ISOGEN version 11.1.0 (Bui
TR#PB 131885 Requires ISOGEN version 11.1.0 (Bui
TR#PB 132109 Requires ISOGEN version 11.1.0 (Bui
TR#PB 132309 Requires ISOGEN version 11.1.0 (Bui
TR#PB 139183 Requires ISOGEN version 11.2.1 (Bui
TR#PB 140396 Requires ISOGEN version 11.2.1 (Bui
TR#PB 144230 Requires ISOGEN version 11.2.1 (Bui
10.00.00.31 XP/2000 4/6/2012 TR#PB 127780
10.00.00.30 XP/2000 12/2/2011 TR#PB 125744
10.00.00.29 (No version developed)
10.00.00.28 XP/2000 9/19/2011 TR#PB 124368
10.00.00.27 (No version developed)
10.00.00.26 (No version developed)
10.00.00.25 XP/2000 6/27/2011 TR#PB 122156
TR#PB 122157
10.00.00.24 XP/2000 3/18/2011 TR#PB 119841
10.00.00.23 No version developed
10.00.00.22 XP/2000 2/17/2011 TR#PB 118947
TR#PB 119434 Requires ISOGEN version 10.2.0 (Bui
TR#PB 119832 Requires ISOGEN version 10.2.0 (Bui
10.00.00.21 XP/2000 1/20/2011 TR#PB 117369-Case Specific: Missing Cut List number
10.00.00.20 XP/2000 8/16/2010 TR#PB 114780-IsoRequires
outputs ISOGEN
incorrect version 10.1.0
elevation at the(Bui
cap
10.00.00.19 No version needed
10.00.00.18 No version needed
10.00.00.17 XP/2000 5/11/2010 TR#PB 113593-Case specific: ISO not displaying proper
Requires
TR#PB 113893-Case ISOGEN
specific: version
ISO not 10.0.0
displaying (Bui
"Cont.
Requires ISOGEN version 10.0.0
TR#PB 114227-Fixed problem with valve operator not (Bui
b
10.00.00.16 XP/2000 4/14/2010 TR#PB 112964-Isometric fails when coupling (CPLGE) i
10.00.00.15 XP/2000 12/18/2009 TR#PB 110666- Requires ISOGEN version 9.3.0 (Build
10.00.00.14 XP/2000 12/1/2009 TR#PB 110724- Requires ISOGEN version 9.3.0 (Build
10.00.00.13 XP/2000 10/9/2009 TR#PB 109416- Requires ISOGEN version 9.3.0 (Build
10.00.00.12 XP/2000 9/21/2009 TR#PB 108877- Requires ISOGEN version 9.3.0 (Build
TR#PB 109293
10.00.00.11 XP/2000 8/17/2009 TR#PB 107900 Requires ISOGEN version 9.3.0 (Build
10.00.00.08 XP/2000 7/8/2009 TR#PB 107901 Requires ISOGEN version 9.2.0 (Build
TR#PB 107902 Requires ISOGEN version 9.2.0 (Build
TR#PB 107903 Requires ISOGEN version 9.2.0 (Build
10.00.00.06 XP/2000 6/5/2009 TR#PB 107904 Requires ISOGEN version 9.2.0 (Build
TR#PB 107905 Requires ISOGEN version 9.2.0 (Build
10.00.00.03 XP/2000 3/12/2009 TR#PB 107906
TR#PB 107907 Iso fails for a skewed pipeline having a b
PD_CLASH 10.00.01.02 XP/2000 8/27/2009 TR#PB 107908 defined.
10.00.00.01 XP/2000 3/19/2009 TR#PB 107909 Case specific:no clashes reported betwe
TR#PB 107910 Case specific: "File is read only" messag
TR#PB 107911 Case specific: no clashes reported on a
PD_ORTHO 10.00.00.11 XP/2000 4/6/2009 TR#PB 107912 Dimensioning shown with imperial and m
TR#PB 107913 Structure column coordinates are displa
TR#PB 107914 White space search not working correct
FRAMEWORK 10.00.00.03 XP/2000 5/25/2010 TR#PB 114367 Using the manual option when placing c
10.00.00.02 XP/2000 doesnt
3/19/2010 TR#PB 112398 Verify workcommand
Model' properly. reports different
Case Specific: Wrong weld type on reducer with mixed end preps.
Requires ISOGEN version 11.2.1 (Build 50).
numbers for the branch with using data from the header line.
Requires ISOGEN version 11.2.1 (Build 54).
by the header.
section to the Intermediate Data File(.idf).
Requires ISOGEN version 11.2.1 (Build 54).
Report correct weight on ISO MTO.
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrad
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a Hot fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D
Hot fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular Hot fix release of a product, see the following PDS 3D Version Fixes
Please note that each Hot fix release contains all fixes made in a previous Hot fix release.
mport does not update Eqp center lines and drawing labels.
defined.
(Also resolved in 07.02.00.25, 08.00.01.10)
(Also resolved in 07.02.00.25, 08.00.01.10)
envelope builder requests a FWP seat instead a PDS seat.
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrad
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a Hot fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D
Hot fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular Hot fix release of a product, see the following PDS 3D Version Fixes
Please note that each Hot fix release contains all fixes made in a previous Hot fix release.
turned on.
After using the Segment I/Form Customization command, the PDSREV.fb form
had
The gadgets which had been overwritten
EERWAY_USE_PDS_OVERRIDES by the
option existing
did fields
not allow for for
the PDS defined
mplemented new variable EERWAY_USE_PDS_OVERRIDES to allow Raceway to use
Citrix: Allow for the re-definition of MS_CONFIG via PDS environment variable.
Citrix: Allow for definition of PDS Control File to be defined on a per
user Allow
Citrix: basis for
by the
inserting the information
re-defition into the HKEY_CURRENT_USER
of MS_FONTRSC registry
via PDS environment variable.
Citrix: Allow for the re-defition of MS_USERPREF via PDS environment variable.
mproved Intersect Underground Piping command.
PDS crashes while loading short material description library
mproved Intersect Underground Piping command.
Case Specific: RDB Conflict Report incorrectly outputs discrepancies between the flange and the reference
dataconflict
RDB when there
reportisincorrectly
a spec break between
outputs the flangebetween
discrepancies and instrument.
the model and the reference data for schedule
thickness on the weld neck flange when connected to
Fixed problem with standard note library not verifying correctly.a reducing item.
Program returns error failed to find SIZE-DEPENDENT commodity data for PIPING even the entry is existing in pdtable_211
Proposed RDB Changes report incorrectly returns discrepancies on commodity
codeSpecific:
Model of every After
component
runninginSurface
the model even when
command there is90%
on model, no change.
of model disappears.
ncorrect placement of HVAC elements in rotated views.
Design
GenerateFiles(.dgn)
envelopeget corrupted
failed if the filemodels
on equipment size iswith
big. shifted global origin
(Also fixed in PEHVAC 07.02.00.23 and 07.03.00.14 and 08.00.00.12)
defined.
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrad
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a Hot fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D
Hot fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular Hot fix release of a product, see the following PDS 3D Version Fixes charts.
Please note that each Hot fix release contains all fixes made in a previous Hot fix release.
Summary of Latest PDS 3D version 8.0 Software Versions ( 2000 and XP) LAST REVISION DAT
PD_XPDA 08.00.00.63 XP/2000 10/13/2006 TR#PB 78309 Trying to create an area which exists already
08.00.00.58 XP/2000 9/15/2006 TR#PB 70254 - PD_XPDA does not delete the .tmp files crea
TR#PB 71006 - Document and help contain incorrect informa
08.00.00.57 XP/2000 12/13/2005 TR#PB 71786 - View PMC, all decimal of NPD are round-up,
PD_ISO 08.00.00.19 XP/2000 10/1/2007 TR#PB 88162- The continuation label on iso's are missing or
TR#PB 87312/DM 89013- If five or more supports are placed
shows87338-
TR#PB NPD forIso
four supports only.
continuation is in the wrong position on is
08.00.00.18 XP/2000 Requires ISOGEN
7/17/2007 TR#PB 85964- Duplicate pipe support version 8.13.1
callouts on 1/2(Build
inch22 lin
pipe support.
TR#PB 86673- Corrected problem with Insulation and Heat T
TR#PB 86682- Specific case, extra pipe support gets called out o
08.00.00.16 XP/2000 6/1/2007 TR#PB 85700 -Specific case, program returns Isogen "FAIL"
08.00.00.15 XP/2000 5/7/2007 TR#PB 74224- Insulation lines plotted on iso are coming out
in Isogen
TR#PB 82082- When 8.12.6,
Isogen Switch as61
compared to dashed
is set to '0' or '2', theli
TR#PB 82409- Thedimension
number offorcomponents
an insulatedexceeds
line shows thean o
limit
TR#PB 82539- When more than 4 logical supports are place
TR#PB 82594- Unable to setup user access for Iso extractio
TR#PB 84273- Intergraph Switch 75 = 1 is producing "False
08.00.00.14 XP/2000 10/30/2006 TR#PB 70257- When flow direction is defined on a line the s
08.00.00.13 XP/2000 10/17/2006 correctly
TR#PB 64951- If a 45 degreeon iso.
rweldHowever,
is placedwhenon a modifying
pipe, isog
TR#PB 70233- The socket olet is reported on the MTO on th
TR#PB 72492- Flanged Eccentric Reducer is shown reverse
TR#PB 72554- Combination of a nozzle- gate valve- spectac
shows incorrect
TR#PB 72655- Program generates valve
a welddimension,
in the BOM whenwithIson
facespecific:
TR#PB 74557- Case for the connection
Iso fails in a ofconfiguration
a BE nozzle and with
Requires
TR#PB 77984- Case ISOGEN
specific: ISOGEN version
Switch 8.12.6
54 =(Build 18
4. A fiel
TR#PB 78268- Facility to have correct BOP elevation when u
TR#PB 78613- Implied material is not shown in iso as well as
08.00.00.12 XP/2000 6/19/2006 lines besides
CR#PB 40519 - Facility the first
to suppress line.between and Pipe
welds
PD_ISOGEN 08.00.00.19 XP/2000 10/1/2007 TR#PB 88162- The continuation label on iso's are missing or
TR#PB 87338- Iso continuation is in the wrong position on is
08.00.00.18 XP/2000 7/17/2007 Requiresproblem
TR#PB 86673- Corrected ISOGENwith version 8.13.1and
Insulation (Build
Heat 22T
08.00.00.15 XP/2000 4/11/2007 when turned off.
TR#PB 74224- Insulation lines plotted on iso are coming out
in Isogen
TR#PB 82082- When Isogen 8.12.6,
Switch as61compared to dashed
is set to '0' or '2', theli
08.00.00.13 XP/2000 10/17/2006 Requires
dimension
TR#PB 64951- If a 45 degree ISOGEN
forrweld version
an insulated 8.12.6
is placedline (Build
on shows
a pipe,an 21
o
isog
TR#PB 70233- TheRequires
socket ISOGEN
"DOUBLEBACK version
PIPE"
olet is reported on8.12.6
error.the MTO(Build
on21 th
Requires ISOGEN
TR#PB 72554- Combination of a nozzle-versiongate8.12.6
valve-(Build
spectac18
TR#PB 72655- Program generates a weld in the BOM with n
facespecific:
TR#PB 74557- Case for the connection ofconfiguration
Iso fails in a a BE nozzle and
with
Requires
TR#PB 77984- Case ISOGEN
specific: ISOGEN version 8.12.6
Switch 54 =(Build 18
4. A fiel
FWPLUS 08.00.00.24 XP/2000 1/25/2008 a shop weld. In an older version of ISOGE
TR#PB 91163-Can not run FWP if microstation XM is installe
08.00.00.23 XP/2000 9/26/2007 TR#PB 89750-PDS pipe models are not getting cut out using
08.00.00.20 XP/2000 9/3/2007 TR#PB 84460-Cutout command causes MDL abort when use
08.00.00.19 XP/2000 4/17/2007 TR#PB 10728- Automatic update of Create view title descrip
TR#PB 84404- Case Specific: Customer's model aborts whe
08.00.00.18 XP/2000 3/9/2007 CR#PB 73896- Provided command line key-in for Verify Mod
08.00.00.22 XP/2000 9/26/2007 TR#PB 89103 -Incorrect Graphics Display for cutbacks has b
PD_SHELL 08.00.00.14 XP/2000 6/14/2007 TR#PB 83424- Create Project no longer support's the use of
08.00.00.13 XP/2000 2/21/2007 TR#PB 83118- Facility to edit Label definition which has use
TR#PB 81989- Program displays standard section library AIS
TR#PB 79929- when
Unableinserting
to setupauser
framework
accessproject into PDS
for a specific us
PD_DESIGN 08.00.00.15 XP/2000 (names with 10 characters
11/5/2007 TR#PB 87146- a pipe in certain models. length).
08.00.00.13 XP/2000 5/11/2007 TR#PB 85327- Model specific: aborts when running VERIFY
08.00.00.12 XP/2000 TR#PB 84732- Fixed intermittent aborts in Piping Design cau
PD_REPORT 08.00.00.11 XP/2000 8/27/2007 TR#PB 88112- of piping OR
Intermittend while executing
- Project some other
specific - unable co
to run
PD_PROJEC 08.00.00.14 XP/2000 3/14/2008 TR#PB 90989- created..
08.00.00.13 XP/2000 11/6/2007 TR#PB 90002- Customer specific: PDME export generating
PD_CLASH 08.00.00.13 XP/2000 2/21/2008 TR#PB 92223- (Alsocomment
Clash fixed in PD_Clash
disappears07.03.00.13)
after rerunning in
08.00.00.12 XP/2000 7/11/2007 TR#PB 86728- (Also fixed in PD_Clash 07.03.00.12)
m Intergraph for new and upgrade shipments.
mart.intergraph.com WEB site.
he Summary of Latest PDS 3D tables is presented in bold.
welded cap.
Summary of Latest PDS 3D Software Versions for releases 7.3
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrad
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a Hot fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D
Hot fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular Hot fix release of a product, see the following PDS 3D Version Fixes charts.
Please note that each Hot fix release contains all fixes made in a previous Hot fix release.
Summary of Latest PDS 3D version 7.3 Software Versions ( 2000 and XP) LAST REVISIO
Fixes charts.
the center, iso output shows tee coming from one end of
causing iso to fail with "DOUBLEBACK PIPE" errors.
ension by ISOGEN for eccentric reducers on sloped lines.
.11.9 (Buildline,
of sloped 21).eccentric reducer, tee, eccentric
place the is
tion note incorrect
missingoffset callout bypass configuration.
in a particular
.11.9 (Build 21).
n of a globe valve and sockolet will not display correctly
trunion support on an elbow with a base plate and two guides,
sing the item tag on the ISO drawing. The MTO is okay.
action fails when the pipeline is composed by multiple
reported in the isometric BOM when a coupling is placed
s two customized components, one has 10 implied items and
ected to the PD_Shell form if the interactive isometric
ailable whenlimit
so drawing attempting to submit
points, setting INGR an word 64 to value 1,
:peError splitting the MTO neutral file.
line will cause PD_ISO to hang. File specific
PD_Iso 07.03.00.11 & PD_Isogen 07.03.00.11, iso extraction
ratio for downward pipeline slope when ISOGEN
e $ENV{'PDISOFONT'} = '106' is set in the pds.cmd so that
onents are reported in Isometric BOM, when using RWELD with
in anote
tion project using DINRDB.
is missing in a customer specific slope pipeline.
d.11.9 (Buildare
symbols 18).
generated when the pipeline is composed by
sional problem when filler-flange (REDC) is used.
dimension is incorrect when there is a custom orifice
end preparations are FTE.
.11.9 (Build 18).
00.28)
33).
ocessing certain characters in Russian Language in short
5 of when
ors MDP trying
Schema is published
to transfer with some
attributes from SPPID 4.2 and SPPID 4.3 to PDS 7.3
oject to new project command fails.
es not delete the .tmp files created in temp directory during "Copy Seed Project to New Project".
d help contain incorrect information for the Command Line Mode.
erate the stress neutral file when there are supports in a slope pipeline.
rial description option.
02.00.17)
ement by Asid ID" command is not capable of locating pseudo cables.
upted when Airway is connected to Tray and portion of Tray is deleted from model.
ore than 200 models already loaded, reloading a model from the graphics environment unloads the entire ee_schema
disciplines.
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrad
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a Hot fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D
Hot fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular Hot fix release of a product, see the following PDS 3D Version Fixes
Please note that each Hot fix release contains all fixes made in a previous Hot fix release.
Summary of Latest PDS 3D version 7.2 Software Versions ( 2000 and XP) Last revision date 10/14/
TR#PB 34358 - MDP fails to publish fwp data into the mto tab
TR#PB 44529 - Entity number is not written correctly for arc w
TR#PB 44376 - Batch propagation not recognizing that the prp
TR#PB 45009 - View modification and setting results in MDL a
07.02.00.15 XP/2000 3/31/2003 TR#PB 45233 - Rule Based offset working inconsistently for v
TR#PB 45579 - Exception error running command line propag
TR#PB 41585 - Regression: cannot apply RBJ on some memb
TR#PB 40824 - Model specific: locks up running cutback on b
TR#PB 41098 - System looks up running batch propagation o
TR#PB 41100 - Mdl abort trying to copy slabs with holes from
TR#PB 41236 - Wrong weight calculation for tapered beams. (
TR#PB 41438 - No member weight calculated for tapered roun
TR#PB 41439 - Weight per unit length for tapered pipe sectio
TR#PB 43462 -
PD_LICE 07.02.01.00 XP/2000 7/31/2003 Applying RBJ - PDS licensing for Pelican Forge Version 7.
CR#PB 32695
results in loss
of WPO
PD_ISOGEN 07.02.00.65 XP/2000 8/16/2010 TR#PB 114780- Iso outputs incorrect elevation at the cap end
07.02.00.64 XP/2000 5/12/2010 configuration.
TR#PB 113893- Case specific: ISO not displaying "Cont. On".
07.02.00.63 XP/2000 12/1/2009 TR#PB 110724- Requires ISOGEN version 9.3.0 (Build 36)
07.02.00.62 XP/2000 9/21/2009 TR#PB 108877- Requires ISOGEN version 9.3.0 (Build 29).
TR#PB 109293
07.02.00.61 XP/2000 8/17/2009 TR#PB 107891- Requires ISOGEN version 9.3.0 (Build 23).
07.02.00.59 XP/2000 7/8/2009 TR#PB 107034- Requires ISOGEN version 9.2.0 (Build 31).
TR#PB 107040- Requires ISOGEN version 9.2.0 (Build 31).
Requires isometric
TR#PB 107283- Corrected ISOGEN problem
version 9.2.0 (Build
with grid 31).
bubble
07.02.00.57 XP/2000 6/21/2009 TR#PB Requires ISOGEN version 9.2.0 (Build 28).
07.02.00.56 XP/2000 105599-
2/9/2009 TR#PB 102685- Requires ISOGEN version 9.1.0 (Build 28).
Corrected
07.02.00.55 No version created by Development
isometric
TR#PB 102811- Requires ISOGEN version 9.1.0 (Build 28).
problem with
07.02.00.54 XP/2000 11/20/2008 grid
TR#PB 99336-
bubbles. Requires ISOGEN version 9.1.0 (Build 22).
Requires
TR#PB Requires
99586- Weld symbolISOGEN
will not version
scale in 9.1.0 (Build
the *.ddf 22).P
if the
ISOGEN
TR#PB 99660- Requires
2nd columnISOGEN
after theversion 9.1.0is(Build
thickness greater22).
th
version 9.2.0
TR#PB 99757- Requires ISOGEN version 9.0.0 (Build 31).
07.02.00.51 XP/2000 8/22/2008 (Build 28).
TR#PB 93560/
TR#PB 97665- Requires ISOGEN version 9.0.0 (Build 31).
07.02.00.50 XP/2000 2/28/2008 TR#PB 64630- Requires ISOGEN version 8.13.3 (Build 6).
TR#PB 87644- Requires ISOGEN version 8.13.3 (Build 6).
TR#PB 88708- Requires ISOGEN version 8.13.3 (Build 6).
TR#PB 90263- Requires ISOGEN version 8.13.3 (Build 6).
TR#PB 91459- Requires ISOGEN version 8.13.3 (Build 6).
TR#PB 91748- Requires ISOGEN version 8.13.3 (Build 6).
TR#PB 92126-
TR#PB 92582-
TR#PB 93144- occurrence when running iso with INGR opt
07.02.00.49 XP/2000 1/10/2008 TR#PB 84761- Requires ISOGEN version 8.13.1 (Build 26)
TR#PB 90313- Requires ISOGEN version 8.13.1 (Build 26)
Requires ISOGEN version 8.13.1 (Build 26)
TR#PB 90450- Missing valve callout on iso output and iso ou
TR#PB 90655- Requires
show a 45ISOGEN version 8.13.1 (Build 26)
degree angle.
7.02.00.46 XP/2000 6/21/2007 TR#PB 85975- IsoRequires ISOGEN
continuation is in version
the wrong 8.12.6 (Build
position on24)
iso
TR#PB 86366- Requires ISOGEN version 8.12.6 (Build 24)
Iso fails when non-orthogonal lines have redu
7.02.00.45 XP/2000 5/17/2007 CR#PB 28967 -Skewed support
Structural orientation
Reference file isnotes
usedcan
withbe turne
INGR
using the new Using
positioncustomer's
B added symbol.lib
to Intergraph produces
Option incorre
59.
TR#PB 84826- Requires
iso output.ISOGEN version 8.12.6 (Build 21)
TR#PB 85537- Requires ISOGEN version 8.12.6 (Build 21)
7.02.00.44 XP/2000 3/23/2007 TR#PB 72554 - Wrong Dimension called out when valve is co
TR#PB 74155/67620 - Line breaks are shown incorrectly when
7.02.00.40 XP/2000 2/1/2006 TR#PB 72655 - Program generates a weld in the BOM with no
07.02.00.38 XP/2000 12/20/2005 TR#PB 71596 - Case Specific: Iso part of drawing is missing a
TR#PB 71053- For a line with more than 17 characters in the s
Iso extraction
TR#PB 72007 - Inwith repeatability
a mixed does
unit project not write
(NPD the 148
in imperial and
unit an
07.02.00.36 XP/2000 to the
the
10/7/2005 TR#PB .idf. - thickness
Insulation
68797 unitcausing
Elbolets are is showing in fail
iso to imperial unit inst
with "DOUBL
07.02.00.33 XP/2000 insulation
Requires
6/6/2005 Same as PD_ISO break.
ISOGEN version 8.11.9 (Build 22).
07.02.00.33
07.02.00.31 XP/2000 2/25/2005 TR#PB 64739 - RPAD is not reported in the isometric BOM wh
07.02.00.28 XP/2000 TR#PB 21887 - Incorrect fall ratio for downward pipeline slope
switch53166
TR#PB 19 is set- Iftothe
1. variable $ENV{'PDISOFONT'} = '106' is
Requires
the iso59078ISOGEN
output- will version
use font 8.11.9
106, the(Build
boxes 18).
and underlines in
TR#PB Orphan components are reported in Isometric
display in
certain59213 the wrong
Header/Branch place.
sizes in anote
project using DINRDB.
TR#PB
Font the- default
50 orISOGEN The continuation
font will display is missing
with in a custome
the boxes and un
Requires
Requires ISOGEN version
version 8.11.9
8.11.9 (Build
(Build 18).
18).
with no59848
TR#PB problems.
- Incorrect weld symbols are generated when
Requires
two
TR#PB drains
60191ISOGEN
and usingversion
- Correct the 8.11.9version
Isogen
dimensional (Build 18).
8.11.9
problem Build
when 11 or B
filler-flang
Requires
Requires ISOGEN
ISOGEN version 8.11.9
version 8.11.9 (Build
(Build 18).
TR#PB 60304 - The pipeline dimension is 18).
incorrect when there
07.02.00.27 XP/2000 TR#PB 55281 - Missing double dimensioning forare
flange assembly with the tap end preparations FTE.when
valves
Requires
position 7 ISOGEN
and version
position 2 8.11.9
are set to(Build
1. 18).
TR#PB 56444- Pipeline displays 2 skew boxes, should only d
Requires
specific ISOGEN version 8.11.9 (Build 14).
problem.
07.02.00.26 XP/2000 7/29/2004 TR#PB 34354 - System fails to show sloped indication on isom
Requires ISOGEN version 8.11.9 (Build 14).
TR#PB 55908 - In a specific case, program incorrectly outputs
TR#PB 56049 - RWeld receives the same component part num
TR#PB 57303 - The continuation note is missing in the joint be
TR#PB 57225 - Defining field fit length via ISOGEN Option Sw
07.02.00.25 XP/2000 6/2/2004 TR#PB 54796 - Continuation note is missing in a flange to flan
07.02.00.24 XP/2000 5/10/2004 TR#PB 43601 - In a specific customer pipeline, when Isogen s
TR#PB 46745 - The Batch Isometric extracts with 10 sheets.
TR#PB 48721 - On a long sloped line the Continuation Notes
TR#PB 51392 - Cut pipe list overflows and overlaps with the ti
TR#PB 53284 - When the flange (and the tap direction) is rota
TR#PB 53737 - An extra spool number is reported in the head
TR#PB 54796 - Continuation note is missing in a flange to flan
CR#PB 53270 - PDS is now compatible with Digital InterPlot v
TR#PB 53749 - When the default enclosure type (bubble) for i
TR#PB 54836 - Spool no is missing in a branch connection
07.02.00.22 XP/2000 3/23/2004 TR#PB 24436 - Dimension to insulation break in the middle of
TR#PB 30525 - When a branch line consists of a sockolet-nipp
TR#PB 48775 - Missing continuation notes for the connection
TR#PB 51764 - Missing composite dimension between socket
TR#PB 52009 - If ISOGEN Option Switch 66 is set to 2, dimen
TR#PB 52552 - Created Type 2 Labels using label 962, ran Is
TR#PB 53013 - When there is an attribute break at a socket-w
TR#PB 53072 - Missing Piece mark number in the iso MTO.
TR#PB 53737 - An extra spool number is reported in the head
07.02.00.21 XP/2000 2/23/2004 TR#PB 53472 - Fixed graphics display on iso when a tee is pla
07.02.00.20 XP/2000 1/8/2004 TR#PB 23229/38524 - Interactive isometric extraction displays
TR#PB 26102 - An extra slanted dimension is obtained on the
TR#PB 28449 - Clamped end for U-return 6Q5P19 is drawn a
TR#PB 29863 - Particular customer lines always fail when grid
TR#PB 35804 - User defined END_POINT_COMPONENT_LA
TR#PB 38287 -
A rotated
TR#PB 38420 - When Placing a Flanged Wye and which is ma
branch is
shown in
Down-South
direction, even
though it is
modeled in Up-
South direction.
TR#PB 41443 - When ISOGEN Option Switch 27 is set to 0, it
TR#PB 42077 -
If Intergraph
TR#PB 47058 - Duplicate Part Number callouts are shown for
Option 67 is set
TR#PB
to 1, part49319
of the- Site welds are not converted to Fabrication we
dash continued
TR#PB 50266 - The idf has an orifice assembly and drip ring h
07.02.00.19 XP/2000 10/21/2003 branch
TR#PB line with- Drawing of U-turn elbow in sloped line is jumb
28455
dimension in
TR#PB
the RWELD33709 is - Composite dimension is wrong on sloped line
shown as
TR#PB solid - System fails to show sloped indication on isom
34354
line.
TR#PB 35897 - Program give fitting shape not found for conce
TR#PB 35929 - System fails to display pipeline graphics on iso
TR#PB 41443 - When ISOGEN Option Switch 27 is set to 0, u
TR#PB 49637 - MTO header containing Russian characters is
TR#PB 50422 - Unwanted extra characters are reported at the
8/11/2003 TR#PB 8083 - Incorrect falling section callout for very small s
TR#PB 30775 - Wrong orientation callout for an olet branch co
TR#PB 43398 - Isogen failed when Isogen Option Switch 118
TR#PB 44557 - Russian characters are not displayed correctly
PD_STRESS XP/2000
PD_DATA 07.02.00.16 XP/2000 7/21/2004 TR# PB 56378 - Corrected the problem where wrong schedule
PD_REVIEW 07.02.00.18 XP/2000 3/28/2005 TR#PB65385 - ProjectCorrected the problem
list option where gaskets
is not shipping NON_PDS are b
PD_DESIGN 07.02.00.32 XP/2000 1/11/2008 TR#PB 83542- Case Specific: pipe_length attribute in pdtable
07.02.00.31 XP/2000 9/21/2007 TR#PB 49516-
TR#PB 45767- any values defined for these attributes.
07.02.00.30 XP/2000 11/1/2006 TR#PB 45121 - Update Component from RDB in Review RDB
07.02.00.25 XP/2000 3/29/2005 update64299
TR#PB the last placed date
- Corrected theforproblem
pipes orwhere
instruments, but not
user could doesp
components.
TR#PB 40579 - "Move Pipe" command moves some pipes do
07.02.00.24 XP/2000 10/1/2004 "Active
TR# Group"- option
PB 59845 Placingisaused.
support(Project Specific)
with Pipe Support Modeler
07.02.00.23 XP/2000 8/16/2004 TR# PB 57194 - Mixed end prep pipe will not place when insu
TR# PB 56293 - Copy Pipe and Copy Model commands copy
TR# PB 53651 - When insulation display is turn on, user defin
TR# PB 42279 - User-defined weld numbers are missing on in
07.02.00.22 XP/2000 4/9/2004 CR# PB 53270 - PDS is now compatible with Digital InterPlot v
07.02.00.21 XP/2000 3/18/2004 TR# PB 52787- CPU usage goes to 100% when placing a pip
TR# PB 53742 - When selecting the P&ID drawing from the 'S
CR# PB 50166 - PDS is now compatible with SPPID version 3
07.02.00.20 XP/2000 12/19/2003 TR# PB 50640 - The Bend Deflection Table check is no longe
07.02.00.19 XP/2000 10/21/2003 TR# PB 45269 - Segment data transfer from SPPID transfers
TR# PB 44010 - Load from SP P&ID changes the System of U
07.02.00.18 XP/2000 8/12/2003 TR# PB 46396 - SmartPlant P&ID Drawing will not display whe
TR# PB 45269 - Segment data transfer from SPPID transfers
TR# PB 45949 - Software terminates after using "Load from P
07.02.00.17 XP/2000 4/9/2003 TR# PB 43467 - Approval Control Manager does not work on
07.02.00.16 TR# PB 42336 - The Line Number Label is truncated to 40 cha
MDP output for bolts & nut is incorrect when u
PD_REPORT 07.02.00.20 XP/2000 1/20/2010 TR# PB 111147-Program uses incorrect commodity code to re
dependant.
Corrected
bolt and problem
gasket. Itwhere Size dependent
uses "size dependent dat
com
07.02.00.19 XP/2000 12/28/2007 TR# PB 91311- pipe by looking for two thicknesses on the G
description for bolt and gasket even the type
07.02.00.18 XP/2000 12/4/2007 TR# PB 91041- "system commodity code".
Program does not code
When commodity publish commodity
is set code fo
to size depende
when commodity code is set to size
is set to system commodity code, MDP depend
dum
TR# PB 71197- what source of implied Data is being set to.
code for bolt to pdtable_120. It should dum
TR# PB 71198- the spec to pdtable_120.
07.02.00.17 XP/2000 8/17/2006 TR# PB 75831 - Specific case, program returns application err
XP/2000
PD_ISO 07.02.00.65 XP/2000 8/16/2010 TR#PB 114780- Iso outputs incorrect elevation at the cap end
07.02.00.64 XP/2000 configuration.
5/12/2010 TR#PB 113893- Case specific: ISO not displaying "Cont. On".
Requires ISOGEN
TR#PB 114227- Fixed problem version
with valve 10.0.0not
operator (Build
being45)d
07.02.00.63 XP/2000 12/1/2009 TR#PB 110724- Requires ISOGEN version 9.3.0 (Build 36)
07.02.00.62 XP/2000 9/21/2009 TR#PB 108877- Requires ISOGEN version 9.3.0 (Build 29).
TR#PB 109293
07.02.00.61 XP/2000 8/17/2009 TR#PB 107891- Requires ISOGEN version 9.3.0 (Build 23).
07.02.00.59 XP/2000 7/8/2009 TR#PB 107034- Requires ISOGEN version 9.2.0 (Build 31).
TR#PB 107040- Requires ISOGEN version 9.2.0 (Build 31).
TR#PB 107283- Requires ISOGEN version 9.2.0 (Build 31).
07.02.00.56 XP/2000 2/9/2009 TR#PB 102685- Requires ISOGEN version 9.1.0 (Build 28).
TR#PB 102811- Requires ISOGEN version 9.1.0 (Build 28).
07.02.00.55 XP/2000 12/5/2008 TR#PB 100946-
07.02.00.54 XP/2000 11/20/2008 TR#PB 99336- Requires ISOGEN version 9.1.0 (Build 22).
TR#PB 99586- Requires ISOGEN version 9.1.0 (Build 22).
TR#PB 99660- Requires ISOGEN version 9.1.0 (Build 22).
TR#PB 99757-
07.02.00.52 XP/2000 9/5/2008 TR#PB 98342/-
94896
TR#PB 98342/- turned on.
07.02.00.51 XP/2000 8/22/2008 TR#PB 93560/
TR#PB 97665- Requires ISOGEN version 9.0.0 (Build 31).
07.02.00.50 XP/2000 2/28/2008 TR#PB 64630- Requires ISOGEN version 8.13.3 (Build 6).
TR#PB 87644- Requires ISOGEN version 8.13.3 (Build 6).
TR#PB 88708- Requires ISOGEN version 8.13.3 (Build 6).
TR#PB 90263- Requires ISOGEN version 8.13.3 (Build 6).
TR#PB 91459- Requires ISOGEN version 8.13.3 (Build 6).
TR#PB 91748- Requires ISOGEN version 8.13.3 (Build 6).
TR#PB 92126-
TR#PB 92582-
TR#PB 93144- occurrence when running iso with INGR opt
07.02.00.49 XP/2000 1/10/2008 TR#PB 84761- Requires ISOGEN version 8.13.1 (Build 26)
TR#PB 90313- Requires ISOGEN version 8.13.1 (Build 26)
TR#PB 90450- Requires ISOGEN version 8.13.1 (Build 26)
TR#PB 90655- Requires ISOGEN version 8.13.1 (Build 26)
Missing valve callout on iso output and iso ou
7.02.00.47 XP/2000 9/14/2007 TR#PB 87312- If five or more supports are placed on elbow,
show a 45 degree angle.
7.02.00.46 XP/2000 6/21/2007 TR#PB 85975-
IsoRequires ISOGEN
continuation is in version 8.12.6
the wrong (Build
position on24)
iso
TR#PB 86366- Requires ISOGEN version 8.12.6 (Build 24)
Iso fails when non-orthogonal lines have redu
7.02.00.45 XP/2000 5/17/2007 CR#PB 28967 -Skewed support
Structural orientation
Reference file isnotes
usedcan
withbe turne
INGR
using the new Using
positioncustomer's
B added symbol.lib
to Intergraph produces
Option incorre
59.
TR#PB 84826- Requires
iso output.ISOGEN version 8.12.6 (Build 21)
TR#PB 85537- Requires ISOGEN version 8.12.6 (Build 21)
07.02.00.44 XP/2000 3/23/2007 TR#PB72554 - Wrong Dimension called out when valve is con
.
TR# 74155/67620 - Line breaks are shown incorrectly when us
07.02.00.43 XP/2000 1/26/2007 TR#PB 82409 - The number of components exceeds the limit
TR#PB 82539 - When more than 4 logical supports are placed
07.02.00.42 XP/2000 7/5/2006 recompiled
07.02.00.41 XP/2000 3/22/2006 TR#PB 57980 - Interactive isometric extraction fails when the
TR#PB 72317 - Problem fixed regarding missing thru-bolted b
TR#PB 73320 - While extracting iso of the branch line, PMC o
TR#PB 73341 (45624) - Iso does not report spec implied pipe
07.02.00.40 XP/2000 2/1/2006 TR#PB 72655 -
Program
TR#PB 72439 - Iso extraction hangs when line has more than
07.02.00.39 XP/2000
generates a
07.02.00.38 XP/2000 12/20/2005 TR#PB
weld in the 71596 -
Case
BOM Specific:
with
TR#PB 71053- no
Iso
item
For part
anumber
lineofwith
07.02.00.37 XP/2000 TR#PB 72007 - In a mixed unit project (NPD in imperial unit an
drawing
shown onis the
07.02.00.36 XP/2000 10/7/2005 more
TR#PB the than 17 - thickness
Insulation
68797 Elbolets are unitcausing
is showing in fail
iso to imperial unit inst
with "DOUBL
missing
iso face
characters a
forpiece
thebreak. version 8.11.9 (Build 22).
in
07.02.00.35 XP/2000 TR#PB insulation
Requires 63995ISOGEN
mark number,
connection
the spool of a- Tee tapped at the center, iso output shows tee
prefix
07.02.00.34 XP/2000 BE the
TR#PB tee,
nozzle not
andthe
68728 center.
- When placing trunion support on an elbow wit
(-7 record),
a reducer.
theIso isometric fails.
07.02.00.33 XP/2000 6/6/2005 TR#PB 60283 -
.
extraction with
When
TR#PB weight
60501is- RPADs are not reported when the Line_id is d
repeatability
reported, the
does
TR#PB and branch.
notpartwrite
65083 However when the branch line has the same
printed
header list - the
then
The continuation
RPAD is
note
reported
is missing
on the iso
in a
BOM.
particula
the (.prt)
file 148
Requiresand
shows ISOGEN version 8.11.9 (Build valve
21).
TR#PB Requires65370 - A combination
ISOGEN version of a globe
8.11.9 (Build 21). and sockole
-28 records
(Also
the separator fixed in version 07.02.00.33)
TR#PB with67393
ISOGEN v8.11.9 Build 18 and 20.
linesto the .idf. - Case specific: Graphics are missing partly on
(above
when Requires
PD_ISO ISOGEN version
07.02.00.32 is 8.11.9
used. (Build 21).
and
TR#PB below 6581the- Incorrect dimension by ISOGEN for eccentric r
TR#PB Total10582
Requires ISOGEN version 8.11.9
- Configurations (Buildline,
of sloped 21).eccentric reduce
Weight'
(Also
reducer value)
fixed in version
and sloped 07.02.00.33)
07.02.00.32 XP/ 2000 5/9/2005 TR#PB
shown as65174 - Whenline will place
Intergraph the incorrect
Option switch 74 offset callout
is set to "1"
for some eccentric reducers.
07.02.00.31 XP/2000 garbage
TR#PB
Requires 64739ISOGEN- RPAD is not 8.11.9
version reported in the
(Build isometric BOM wh
21).
characters
TR#PB
instead of 64971 - Customer has two customized components, o
'--------'. 6020 - The user is ejected to the PD_Shell form if the
TR#PB
Requires
license (IISO) seat is not available when attempting to subm
07.02.00.30 XP/2000 TR#PB 39489,TR#PB41221,TR#PB42243,TR#PB42365,TR#
ISOGEN
interactive job.
TR#PB
version 8.11.962448 - When using iso drawing limit points, setting IN
the software
(Build 21).
TR#PB 63893 gives- CaseError 110:: Error
specific splittingsloped
Customer's the MTOline neutral
having
extraction to hang.
TR#PB 64410 - When customer is using PD_Iso 07.02.00.29 &
extraction
TR#PB 62337 hangs for some lines.
- Customer's However,
isometric showsitduplicate
extracts without
iso insp
07.02.00.29 XP/2000
when PD_Iso 07.02.00.28 & PD_Isogen 07.02.00.28 are use
07.02.00.28 XP/2000 TR#PB 21886 - Incorrect fall ratio for downward pipeline slope
switch53166
TR#PB 19 is set- If to
the1.variable $ENV{'PDISOFONT'} = '106' is
Requires
the iso59078ISOGEN
output- will version
use font 8.11.9
106, the(Build
boxes18).
and underlines in
TR#PB Orphan components are reported in Isometric
display in
certain59213 the wrong
Header/Branch place.
sizes in anote
project using DINRDB.
TR#PB
Font the- default
50 orISOGEN The continuation
font will display is missing
with in a custome
the boxes and un
Requires
Requires ISOGEN version
version 8.11.9
8.11.9 (Build
(Build 18).
18).
with no problems.
TR#PB 59848 - Incorrect weld symbols are generated when t
Requires
two drains ISOGEN
and using version
the 8.11.9version
Isogen (Build 18).
8.11.9 Build 11 or B
TR#PB 60191 - Correct dimensional problem when filler-flang
Requires
Requires ISOGEN
ISOGEN version 8.11.9 (Build 18).
version 8.11.9 (Build 18).
TR#PB 60304 -
The pipeline
TR#PB 55281 - Missing double dimensioning for valves when
07.02.00.27 XP/2000
dimension
position 7isand Pipeline
position displays
2 are set2toskew
1. boxes, should only d
TR#PB
incorrect56444-
when
Requires
specific ISOGEN version 8.11.9 (Build 14).
there is a problem.
Requires
custom ISOGEN version 8.11.9 (Build 14).
orifice
flange
assembly with
the tap end
preparations
are FTE.
07.02.00.26 XP/2000 7/29/2004 TR#PB 42819 - Attribute Breaks do not display in the correct l
TR#PB 34354 - System fails to show sloped indication on isom
TR#PB 55908 - In a specific case, program incorrectly outputs
TR#PB 56049 - RWeld receives the same component part num
TR#PB 57303 - The continuation note is missing in the joint be
TR#PB 57225 - Defining field fit length via ISOGEN Option Sw
07.02.00.24 XP/2000 5/10/2004 TR#PB 43601 - In a specific customer pipeline, when Isogen s
TR#PB 46745 - The Batch Isometric extracts with 10 sheets.
TR#PB 48721 - On a long sloped line the Continuation Notes
TR#PB 51392 - Cut pipe list overflows and overlaps with the ti
TR#PB 53284 - When the flange (and the tap direction) is rota
TR#PB 53737 - An extra spool number is reported in the head
TR#PB 54796 - Continuation note is missing in a flange to flan
CR#PB 53270 - PDS is now compatible with Digital InterPlot v
TR#PB 53749 - When the default enclosure type (bubble) for i
TR#PB 54836 - Spool no is missing in a branch connection
07.02.00.22 XP/2000 3/23/2004 TR#PB 24436 - Dimension to insulation break in the middle of
TR#PB 30525 - When a branch line consists of a sockolet-nipp
TR#PB 48775 - Missing continuation notes for the connection
TR#PB 51764 - Missing composite dimension between socket
TR#PB 52009 - If ISOGEN Option Switch 66 is set to 2, dimen
TR#PB 52552 - Created Type 2 Labels using label 962, ran Is
TR#PB 53013 - When there is an attribute break at a socket-w
TR#PB 53072 - Missing Piece mark number in the iso MTO.
TR#PB 53737 - An extra spool number is reported in the head
07.02.00.20 XP/2000 1/8/2004 TR#PB 23229/38524 - Interactive isometric extraction displays
TR#PB 26102 - An extra slanted dimension is obtained on the
TR#PB 28449 - Clamped end for U-return 6Q5P19 is drawn a
TR#PB 29863 - Particular customer lines always fail when grid
TR#PB 35804 - User defined END_POINT_COMPONENT_LA
TR#PB 38287 -
A rotated
TR#PB 38420 - When Placing a Flanged Wye and which is ma
branch
TR#PB is41443 - When ISOGEN Option Switch 27 is set to 0, it
shown in
TR#PB
Down-South42077 -
If Intergraph
TR#PB 47058
direction, even - Duplicate Part Number callouts are shown for
Option
though 67
it isis set
TR#PB
to 1, 49319
part of the- Site welds are not converted to Fabrication we
modeled in Up-
TR#PB
dash 50266 - The idf has an orifice assembly and drip ring h
Southcontinued
direction.
07.02.00.19 XP/2000 branch line with
10/21/2003 TR#PB 28455 - Drawing of U-turn elbow in sloped line is jumb
dimension in
TR#PB
the RWELD 33709 is - Composite dimension is wrong on sloped line
shown as
TR#PB solid - System fails to show sloped indication on isom
34354
line.
TR#PB 35897 - Program give fitting shape not found for conce
TR#PB 35929 - System fails to display pipeline graphics on iso
TR#PB 41443 - When ISOGEN Option Switch 27 is set to 0, u
TR#PB 49637 - MTO header containing Russian characters is
TR#PB 50422 - Unwanted extra characters are reported at the
07.02.00.18 XP/2000 8/11/2003 TR#PB 8083 - Incorrect falling section callout for very small s
TR#PB 30775 - Wrong orientation callout for an olet branch co
TR#PB 43398 - Isogen failed when Isogen Option Switch 118
TR#PB 44557 - Russian characters are not displayed correctly
07.02.00.17 XP/2000 6/27/2003 TR#PB 45024 -
PEHVAC 07.02.00.23 XP/2000 11/14/2007 Weld
TR#PB numbers
89335 - Design Files(.dgn) get corrupted if the file siz
07.02.00.22 XP/2000 9/27/2006 missing from - Resurfacing duct route changes system and
TR#PB 89371
07.02.00.21 XP/2000 5/3/2006 isometric
TR#PB 73807 - Case fittings.
specific, getting application error on grap
XP/2000 drawing for
07.02.00.17 8/13/2004 TR#PB 58094 - Dr Watson creating HVAC cell on W2K machi
certain pipeline
PD_CLASH 07.02.00.27 XP/2000 10/19/2009 TR#PB 109962 Case Specific: Program aborts when running
configurations
3/12/2009 TR#PB Report inside Interference Approval Manage
07.02.00.25 XP/2000 involving104087 Case specific, program does not report clashe
multiple olet
TR#PB 103731 and specific,
Case equipment model.does
program Interactive clash
not clash checkche
type branch these clashes in the pre-defined volume.
07.02.00.24 XP/2000 11/19/2008 TR#PB even it is
99659- Program
connections. (Also
insidemany
returns
resolved in
the pre-defined volume##
error "component
07.02.00.25)
of ra
th
TR#PB 90467- Inwhen(Also resolved
somerunning in 07.02.00.25)
envelope
cases, clash diagnostic
checker on includ
does not a spe
07.02.00.22 XP/2000 Pipes
1/7/2008
running
TR#PB
through
91326
FW+- holes
reportin slabs
clashes arecorrectly.
generating invalid
It was clashes.
observed tha
07.02.00.21 5/16/2007 TR#PB 84910 - Model has an specific:
element abort
which
running
was located
IFC withatgeneric
the low
TR#PB 73067 - Modelplan.specific:
This caused the range
incomplete volumefortogener
envelope be q
07.02.00.20 XP/2000 software is trying to determine
3/13/2007 TR#PB 81310 - Case specific: Clash checker hangs for specif whether the
07.02.00.19 XP/2000 volume and should be checked,
11/14/2006 TR#PB 79482-Program does not honor the search criteria on the comput
XP/2000 of an integer causing an incorrect result.
07.02.00.16 3/22/2004 TR#PB 53886 - Rotate command not rotating ducts correctly.
PD_PROJEC 07.02.00.23 XP/2000 3/27/2006 TR#PB 73179 - Unable to export multilines instrument's tags w
07.02.00.22 XP/2000 11/28/2005 TR#PB 59829 - End_1_nozzle_id/End_2_nozzle_id attributes
07.02.00.21 XP/2000 TR#PB 65862 - when importing models from an incremental s
07.02.00.17 XP/2000 4/9/2004 CR#PB 53270 - PDS is now compatible with Digital InterPlot v
07.02.00.18 XP/2000 8/17/2004 TR#PB 56293 - Copy Pipe and Copy Model commands copy t
07.02.00.17 XP/2000 4/6/2004 TR#PB 54413 - Archival by model of propagated FW+ models
07.02.00.16 XP/2000 3/17/2003 CR#PB 43134 - The Propagation command has a new option
07.02.00.20 XP/2000 2/15/2005 TR#PB 60167 - The PDME export function fails to export the
BATCH SERVICES 05.00.00.27 XP/2000 2/21/2005 TR#PB54463 - Recurring batch jobs get one hour delay when
TR#PB 60528 - Delayed batch jobs get one hour delay when t
05.00.00.25 XP/2000 1/2/2004 TR#PB 29550 - Recurring batch jobs cause 100% CPU usage
TR#PB 49376 - Not able to run Batch Services on some NT m
05.00.00.24 XP/2000 7/2/2003 TR#PB 47469 - When submitting recurring jobs through Batch
TR#PB 32415 - Application error message for cmd.exe when o
PD_EQP 07.02.00.17 XP/2000 3/13/2007 TR#PB 83535 - Fixing the problem with "Load Design Databas
07.02.00.16 XP/2000 12/20/2006 TR#PB 78962 - Model Specific: Unable to generate Parametri
ases 7.2
e Field Name for NPD setting in the drawing seed file is not
placement. It always
having problem withdefault to double
Automatic Labelsquotes.
command when the reference
han 99 equipments.
compatible with Digital InterPlot version 8.1and Interplot Client version 8.1.
ocess large drawings containing b-splines in several views. Requires PD_Shell 07.02.00.24 or higher
ocess large drawings containing b-splines in several views. Requires PD_Shell 07.02.00.24 or higher
inates are given when rounding off to the nearest 1/2" for labels as well as when just displaying the coordinates on the forms. If user has a
orting zero weight for smartcut members immediately after batch propagation.
ic: MDP Program terminates without giving any error if ran Area wise by selecting
ocess few models and batch finishes without error. Process locks and
unit length for tapered pipe section should not be populated. MDP
g a Flanged Wye and which is mapped to TEXX, if ISOGEN Option Switch 118 Position A is set to 1 to have Overall Dimensions, ISOGEN
EN Option Switch 27 is set to 0, it gets a non aligned underlining for the Heading in the MTO area of the iso
e problem where wrong schedule thicknesses are being reported using indices CDT3 and CDT4.
the problem
option where gaskets
is not shipping NON_PDSare being reported
models. only message
No error once per create.
PCD line entry, rather than expanding to the full range of valid sizes.
c: pipe_length attribute in pdtable_50 is not updated.
ometric extraction fails when the design file name is longer than 19 characters in total including the file extension.
d regarding missing thru-bolted bolts at line breaks.
ing iso of the branch line, PMC of header is displayed in the MTO.
does not report spec implied pipe to the material list on the iso face.
n hangs when line has more than 5 logical supports placed at one point.
g a Flanged Wye and which is mapped to TEXX, if ISOGEN Option Switch 118 Position A is set to 1 to have Overall Dimensions, ISOGEN
EN Option Switch 27 is set to 0, it gets a non aligned underlining for the Heading in the MTO area of the iso
unit is specified.
ect version
hare. Since07.02.00.16
raceway hasand FW+
been version 07.02.00.15
incorperated into PDS and there is Drawing
hare. Since raceway has been incorperated into PDS and there is Drawing
ed and exited, Tray one-line and three-line information is deleted from the model.
ire ee_schema.
ate the dimension to reflect the new changes made.
dinates on the forms. If user has a Duct at BOD elevation at 10:6 3/4, and the round off is set to nearest 1/2", software is rounding it down t
.
and a reducer.
alve with quantity of 0.1M.
a 90 degree elbow.
ut Interactive Iso with "iso" file extension extracts only 5 sheets.
n the same model
ndicator connected to the tap, the orientation of the blind flange and instrument is shown incorrectly on the isometric.
1 of instrument indicator. Batch extraction of this line errors out as two disconnected segments and no graphics are produced.
B is 1 and Intergraph Option 7 is set to 1.
he clamp symbol.
Lines extract correctly when Intergraph Option 71 is set to 0.
cters in length. When extracting the iso, user gets Dr. Watson in ISOGEN.
id "Segment Data Comparison Report". The "Copy/Do Not Copy PID Node Numbers" toggle only works for PDS2D.
sing or duplicated.
unit is specified.
reducing branch lateral
a 90 degree elbow.
ut Interactive Iso with "iso" file extension extracts only 5 sheets.
n the same model
ndicator connected to the tap, the orientation of the blind flange and instrument is shown incorrectly on the isometric.
1 of instrument indicator. Batch extraction of this line errors out as two disconnected segments and no graphics are produced.
B is 1 and Intergraph Option 7 is set to 1.
he clamp symbol.
Lines extract correctly when Intergraph Option 71 is set to 0.
cters in length. When extracting the iso, user gets Dr. Watson in ISOGEN.
shop welds
version 8.9.9. But good iso is extracted with ISOGEN version 8.7.0.
d "Segment Data Comparison Report". The "Copy/Do Not Copy PID Node Numbers" toggle only works for PDS2D.
cpiomodels.Requires PD_Shell version 07.02.00.16 and FW+ version 07.02.00.15
version 07.02.00.16 and FW+ version 07.02.00.15
ings in the registry to SharedSection=1024, 3072,4096,512 using Windows 2000 Server with SP2.
ware is rounding it down to 10:6 instead of 10:7.
re produced.
re produced.
INTERGRAPH Process Power Offshore Divison
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrade shipments.
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a quick fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D tables is presented in bold.
Quick fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular quick fix release of a product, see the following PDS 3D Version Fixes charts.
Please note that each quick fix release contains all fixes made in a previous quick fix release.
Summary of Latest PDS 3D version 7.1 Software Versions (NT, 2000 Only) LAST REVISION DATE: 06/27/2003
Page 249
INTERGRAPH Process Power Offshore Divison
PD_DRAW 07.01.00.13 NT 4/11/2003 TR# PB43447 - Wrong coordinates are given when rounding off to the nearest 1/2" for labels as well as when just displaying the coordinates on the forms. If user has a Duct at BOD elevation at 10:6 3/4, and the round off is
07.01.00.12 2/17/2003 TR# PB42222 - The Mass Annotation command fails, when the drawing has a model attached that contains 100 Equipment items.
07.01.00.11 10/8/2002 TR# PB38054 - The VHL process takes longer to complete when it is running on a server with more than 1 GB RAM.
PD_EQP 07.01.00.11 NT 3/21/2003 TR# PB31495 - Access Control allows greater access than designated, after setting access for EERWAY users. Requires PD_SHELL version 07.01.00.14.
NT Batch 05.00.00.20 NT 8/22/2002 TR# PB37327 - Batch job fails if the batch user (map to user in account mapping) has a home directory defined on a Server. This
happens only on Windows 2000 operating system.
05.00.00.19 NT 4/11/2002 TR# PB30017
TR#PB 71801 -- Newly submitted
Case Sepcific: batch jobs
FWPMDP change
aborts on athe start when
model times user
of existing
sectionbatch jobs,
library making it difficult to differentiate between jobs.
is attached.
FW+ 07.01.00.33 12/6/2005 TR#PB 70890 - Abort when running mdp on certain models.
07.01.00.31 6/7/2005 TR#PB 66735 - When a FWP arc is placed from a Microstation arc having a negative sweep angle,
07.01.00.30 then the linear- report
TR#PB66437 Model for the arcabort
specific: member shows
setting plan negative
view values.
07.01.00.29 NT 10/10/2003 TR# PB43560 - Regression: Copy member command now changing the member name.
07.01.00.28 NT 9/15/2003 TR# PB49881- Opening the test model causes access violation error.
07.01.00.27 NT 8/25/2003 TR# PB49572 - Model specific: abort creating envelope file for slabs with circular holes
07.01.00.26 NT 8/16/2003 TR# PB48708 - When a code parameters table is defined Frame Work Plus will not save the table to the model. If the model is reopening the table information is lost
07.01.00.25 NT 6/17/2003 TR# PB45233 - Rule Based offset working inconsistently for vertical braces.
07.01.00.24 NT 5/21/2003 TR# PB45579 - Exception error running command line propagation if display mode is set to shaded in any view.
TR# PB45009 - Mdl abort while setting or modifying certain views in specific model.
TR# PB45579 - Exception error running command line propagation if display mode is set to shaded in any view
07.01.00.21 NT 3/31/2003 CR# PB42267 - The batch propagation command has a new option to ignore smartcuts while propagating FW+ graphics. Requires PD_Shell version 07.01.00.15 and PD_Project version 07.01.00.11.
TR# PB41336 - Need to change element data in prp file to allow VHL to process properly. Requires PD_Shell version 07.01.00.15 and PD_Project version 07.01.00.11.
TR# PB40335 - Applying named group symbology to user section containing a hole with cutbacks applied causes graphical errors
TR# PB41650 - Command line propagation not working on Windows 2000
TR# PB38291 - User cutbacks on pipe members with mitered cutback display wrong
TR# PB37110 - Slab placed using aecFPL_placesolid() shows wrong thickness in review command
TR# PB36592 - Batch regenerate /update command should not update the model.prp file
Page 250
INTERGRAPH Process Power Offshore Divison
Page 251
INTERGRAPH Process Power Offshore Divison
PD_DATA 07.01.00.12 NT 2/28/2003 TR# PB41709 - False discrepancy is reported in the Reference Data Conflict report for a branch component if thickness equation is not
defined for the piping material class and the branch table has multiple choices.
07.01.00.11 NT 9/16/2002 TR# PB36649 - In some specific cases, 'RDB Conflict Report' process fails to create report file when having customized supports in
model.
PD_REVIEW 07.01.00.14 NT 4/29/2003 TR# PB44846 - Label Builder generates application error if label extents are defined as entire project and Add Weld Graphics option is used
07.01.00.13 NT 2/17/2003 TR# PB41716 - Creating a DesignReview Session with the Project option results in "error mounting file system", when the PDS project
has more than 256 models.
07.01.00.12 NT 11/13/2002 TR# PB37743 - DesignReview Integrator creates incomplete label files for specific FWP models.
07.01.00.11 NT 8/19/2002 TR# PB36684 - Model specific: multiple labels for piping model.
PD_DESIGN 07.01.00.23 NT 3/29/2005 TR#PB64299 - Corrected the problem where user could not place pipe between two elbow
07.01.00.22 NT components. "Move Pipe" command moves some pipes double the distance entered when
TR#PB40579-
07.01.00.21 NT "Active Group"
TR#PB57194 optionend
- Mixed is used.
prep (Project
pipe will Specific)
not place when insulation graphics display is
07.01.00.20 NT 3/18/2004 turned
TR# ON.
PB53651- User defined weld numbers on insulated pipe (graphics turned on) that contain a sockolet will be missing or duplicated
TR# PB42279 - User defined weld numbers are not loaded on pipes when insulation is displayed.
TR# PB53742 - When selecting the P&ID drawing from the 'Select P&ID by Line ID' option, the wrong drawing may be displayed
CR# PB50166 - PDS is now compatible with SPPID version 3.0 and version 4.0
07.01.00.19 NT 12/19/2003 TR# PB50640 - The Bend Deflection Table check is no longer performed during manual placement
07.01.00.18 NT 10/21/2003 TR# PB38767 - A "Component invalid for bend angle" error occurs during placement, whenever a 90^ or 45^ direction change component is selected, and the bend angle has been defined in the form with a value other than
TR# PB44010 - Load from SP P&ID changes the System of Unit setting for Insulation Thickness from the P&ID, instead of respecting the active segment data setting.
TR# PB46396
TR# PB45269 -- SmartPlant
Segment data transfer
P&ID fromwill
Drawing SPPID transfers
not display attribute
when value
there is destined
a comma in for train_number into wrong attribute. PD_Shell version 07.01.00.17 or later is also required
07.01.00.16 NT 8/12/2003 the drawing title.
TR# PB45269 - Segment data transfer from SPPID transfers attribute value destined for
train_number
TR# PB45949 -into wrong attribute.
Software terminates after using "Load from P&ID" when the SmartPlant
P&ID project contains 350 drawings, and no unit is specified.
07.01.00.15 NT 4/9/2003 TR# PB43467 - Approval Control Manager does not work on Japanese Windows Operating System.
07.01.00.14 TR# PB42336 - The Line Number Label is truncated to 40 characters, even though it is set to 50 during project creation .
07.01.00.12 8/30/2002 TR# PB36591 - When loading Weld ID on segment, program gives 'Error Forming Weld ID label for Segment linkage. #, #, #' if label 355
has user defined attribute.
TR# PB36314 - When placing flange component using 'Integral Gasket' system place component using gasket gap value from spec.
TR# PB35779 - If the piping specification is setup for fixed pipe length (pds_sort_code defined). The use of the copy pipeline command
will cause Invalid Elements error after running Data Integrity Verification Command.
TR# PB32774 - For specific configurations, an extra segment is created that extends to the file origin (0,0,0), after using the 'Intersect
Sloped Pipe Run' Command.
Page 252
INTERGRAPH Process Power Offshore Divison
Page 253
INTERGRAPH Process Power Offshore Divison
Page 254
INTERGRAPH Process Power Offshore Divison
3/4, and the round off is set to nearest 1/2", software is rounding it down to 10:6 instead of 10:7.
Page 255
INTERGRAPH Process Power Offshore Divison
Page 256
INTERGRAPH Process Power Offshore Divison
Page 257
INTERGRAPH Process Power Offshore Divison
Page 258
INTERGRAPH Process Power Offshore Divison
Page 259
INTERGRAPH Process Power Offshore Divison
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrade shipments.
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a quick fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D tables is presented in bold.
Quick fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular quick fix release of a product, see the following PDS 3D Version Fixes charts.
Please note that each quick fix release contains all fixes made in a previous quick fix release.
Summary of Latest PDS 3D version 7.0 Software Versions (NT, 2000 Only) LAST REVISION DATE: 04/08/2003
Page 260
INTERGRAPH Process Power Offshore Divison
Page 261
INTERGRAPH Process Power Offshore Divison
PD_ISO 07.00.00.30 NT 10/21/2003 TR# PB 50653 - For some pipelines with model having large partition number, the title block data on isometric is empty.
Page 262
INTERGRAPH Process Power Offshore Divison
Page 263
INTERGRAPH Process Power Offshore Divison
Page 264
INTERGRAPH Process Power Offshore Divison
Page 265
INTERGRAPH Process Power Offshore Divison
Page 266
INTERGRAPH Corporation
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrade shipments.
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a quick fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D tables is presented in bold.
Quick fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular quick fix release of a product, see the following PDS 3D Version Fixes charts.
Please note that each quick fix release contains all fixes made in a previous quick fix release.
Page 267
INTERGRAPH Corporation
Summary of Latest PDS 3D version 6.4.1 Software Versions (NT Only) LAST REVISION DATE: 1/21/2003
Page 268
INTERGRAPH Corporation
Page 269
INTERGRAPH Corporation
Page 270
INTERGRAPH Corporation
Page 271
INTERGRAPH Corporation
Page 272
INTERGRAPH Corporation
Page 273
INTERGRAPH Corporation
Page 274
INTERGRAPH Corporation
Page 275
INTERGRAPH Corporation
Page 276
INTERGRAPH Corporation
Page 277
INTERGRAPH Corporation
Page 278
INTERGRAPH Corporation
Page 279
INTERGRAPH Corporation
Page 280
INTERGRAPH Corporation
Page 281
INTERGRAPH Corporation
Page 282
INTERGRAPH Corporation
and
D but
Page 283
INTERGRAPH Corporation
Page 284
INTERGRAPH Corporation
Page 285
INTERGRAPH Corporation
Page 286
INTERGRAPH Corporation
Page 287
INTERGRAPH Corporation
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrade shipments.
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a quick fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D tables is presented in bold.
Quick fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular quick fix release of a product, see the following PDS 3D Version Fixes charts.
Please note that each quick fix release contains all fixes made in a previous quick fix release.
Page 288
INTERGRAPH Corporation
Summary of Latest PDS 3D version 6.4.0 Software Versions (NT Only) LAST REVISION DATE: 04/11/2000
Page 289
INTERGRAPH Corporation
Page 290
INTERGRAPH Corporation
Page 291
INTERGRAPH Corporation
Page 292
INTERGRAPH Corporation
Page 293
INTERGRAPH Corporation
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrade shipments.
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a quick fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D tables is presented in bold.
Quick fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular quick fix release of a product, see the following PDS 3D Version Fixes charts.
Please note that each quick fix release contains all fixes made in a previous quick fix release.
Page 294
INTERGRAPH Corporation
Summary of Latest PDS 3D version 6.3.1 Software Versions LAST REVISION DATE: 10/01/2001
Page 295
INTERGRAPH Corporation
Page 296
INTERGRAPH Corporation
Page 297
INTERGRAPH Corporation
Page 298
INTERGRAPH Corporation
Page 299
INTERGRAPH Corporation
Page 300
INTERGRAPH Corporation
Page 301
INTERGRAPH Corporation
Page 302
INTERGRAPH Corporation
Page 303
INTERGRAPH Corporation
Page 304
INTERGRAPH Corporation
Page 305
INTERGRAPH Corporation
Page 306
INTERGRAPH Corporation
Page 307
INTERGRAPH Corporation
Page 308
INTERGRAPH Corporation
Page 309
INTERGRAPH Corporation
Page 310
INTERGRAPH Corporation
Page 311
INTERGRAPH Corporation
Page 312
INTERGRAPH Corporation
Page 313
INTERGRAPH Corporation
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrade shipments.
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a quick fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D tables is presented in bold.
Quick fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular quick fix release of a product, see the following PDS 3D Version Fixes charts.
Please note that each quick fix release contains all fixes made in a previous quick fix release.
Page 314
INTERGRAPH Corporation
Summary of Latest PDS 3D version 6.1 Software Versions LAST REVISION DATE: 8/02/99
(Version 6.2 of RD_DINRDB is to be used with PDS3D 6.0, 6.1, and PDS2D 6.2)
Page 315
INTERGRAPH Corporation
Page 316
INTERGRAPH Corporation
Page 317
INTERGRAPH Corporation
Page 318
INTERGRAPH Corporation
Page 319
INTERGRAPH Corporation
Page 320
INTERGRAPH Corporation
Page 321
INTERGRAPH Corporation
Page 322
INTERGRAPH Corporation
Page 323
INTERGRAPH Corporation
Page 324
INTERGRAPH Corporation
Page 325
INTERGRAPH Corporation
Page 326
INTERGRAPH Corporation
Page 327
INTERGRAPH Corporation
Page 328
INTERGRAPH Corporation
Page 329
INTERGRAPH Corporation
Page 330
INTERGRAPH Corporation
Page 331
INTERGRAPH Corporation
Page 332
INTERGRAPH Corporation
Page 333
INTERGRAPH Corporation
Page 334
INTERGRAPH Corporation
N DATE: 8/02/99
6.2 CD
DATE
2/28/1997
2/28/1997
2/6/1997
1/16/1997
1/16/1997
2/21/1997
11/5/1996
1/31/1997
--
10/21/1996
10/21/1996
11/1/1996
1/16/1997
10/29/1996
2/25/1997
10/21/1996
--
11/4/1996
--
--
3/26/1997
Page 335
INTERGRAPH Corporation
eeded.
Page 336
INTERGRAPH Corporation
been
pick
oved
Page 337
INTERGRAPH Corporation
iplines
piping
Page 338
INTERGRAPH Corporation
o the
Page 339
INTERGRAPH Corporation
Page 340
INTERGRAPH Corporation
Page 341
INTERGRAPH Corporation
Page 342
INTERGRAPH Corporation
Page 343
INTERGRAPH Corporation
Page 344
INTERGRAPH Corporation
Page 345
INTERGRAPH Corporation
Page 346
INTERGRAPH Corporation
tson
This
ble for
Page 347
INTERGRAPH Corporation
error.
ams)
m 32
Page 348
INTERGRAPH Corporation
mmands.
ations.
FWP
pound
DL input
of the
. This
Page 349
INTERGRAPH Corporation
ables
ytical
uch a
STAAD,
ed and
F, did
ecorded
hole's
with the
member
Page 350
INTERGRAPH Corporation
er and
ritten
mirrored,
when
ss is
tions
A log
o be
items
Page 351
INTERGRAPH Corporation
anges
ersion,
meet
at the
e. The
ue to
roke
erated
type,
Page 352
INTERGRAPH Corporation
was
RUDL.
e option
mber
here
an one
iptor for
points.
written
is not
bers on
d on the
anges
Page 353
INTERGRAPH Corporation
bles
have
Page 354
INTERGRAPH Corporation
Legend:
Versions listed under the “Kitted Version” column are the versions currently being shipped from Intergraph for new and upgrade shipments.
Versions under the "Latest Version" column show the very latest version available from http:\\smart.intergraph.com WEB site.
If a quick fix release has been made available since the kitted version was released, the line in the Summary of Latest PDS 3D tables is presented in bold.
Quick fixes that have been released since the LAST REVISION DATE are presented in gray.
To see what was fixed in a particular quick fix release of a product, see the following PDS 3D Version Fixes charts.
Please note that each quick fix release contains all fixes made in a previous quick fix release.
Page 355
INTERGRAPH Corporation
Summary of Latest PDS 3D version 5.4 Software Versions LAST REVISION DATE: 4/10/98
Page 356
INTERGRAPH Corporation
Page 357
INTERGRAPH Corporation
Page 358
INTERGRAPH Corporation
Page 359
INTERGRAPH Corporation
Page 360