Professional Documents
Culture Documents
Product Specification
(5MHU)
D1E-HC0056-02
1
Overview
1. Product Overview
Open Access and Compact Design, with the latest
technologies. New “Visionary CT 16” CT meets your
future needs.
The needs for faster and more accurate diagnosis are increasing every
day in the front-line of medical practice. Visionary CT 16 is designed to
answer in one CT all the demands for various routine applications,
compact size, useful results and ease of use without any compromise.
Visionary CT 16 Performance
Newest technologies for high image quality
-1- D1E-HC0056
2
Systemconfiguration
System configuration
2. System configuration
1. Scanner gantry 1
-2- D1E-HC0056
1. Patient table(CT-WT-21) :Long Table
-3- D1E-HC0056
3
Specification
3. Specification
1. Object for scanning : Whole body including head
CT-WT-21 CT-WT-20
1. Material of tabletop : Carbon fiber
Patient table
2. Table height : 450~1,000mm
3. Tabletop width : 475mm : 400mm
4. Maximum scannable : 1,550mm : 1,210mm
range@ Normal scan (1,800mm) (1,500mm)
(with extended tabletop)
5. Maximum load : 227kg(500lb) : 180kg
(supportable load)
-4- D1E-HC0056
3
Specification
1. Scanogram
Maximum scanable : 1,500mm(CT-WT-20 with extended tabletop)
Scanning range 1,750mm(CT-WT-21 with extended tabletop)
Function Measurement slice : 0.625mm x 8
thickness
2. Normal scan
Scan time : 0.75 / 1.0 / 1.5 / 2.0 sec
Image slice thickness : 0.625 / 1.25 / 2.5 / 3.75 / 5 / 7.5 / 10mm
3. Dynamic scan
Scan time : 0.75 / 1.0 / 1.5 / 2.0 sec
Image slice thickness : 0.625 / 1.25 / 2.5 / 3.75 / 5 / 7.5 / 10mm
4. Volume scan
Scan time : 0.75 / 1.0 / 1.5 sec
Image slice thickness : 0.625 / 1.25 / 2.5 / 3.75 / 5 / 7.5 / 10mm
View rate : 1,200view/sec
Volume pitch : 0.563~1.563
Reconstruction method : CORE(3D image reconstruction algorithm)
-5- D1E-HC0056
3
Specification
-6- D1E-HC0056
4
Environmental requirements
4. Environmental requirements
Mean heat Degree Atmospheric
No.
System dissipation※1 Temperature of pressure, and
(℃) humidity altitude
Environmental (W) (kcal/h) (%)
requirements 1 Scanner gantry
2,650 2,273 700 -
2 Patient table 20~28※3
System (-5~33)※2 1,060hPa
3 400 343 35~80 below
Transformer※4
3,000m
Operator’s 10~28
4 350 300
console (-5~33)※2
(*1) Measurement condition of mean heat dissipation
・# of scan : 150 scan/hour
・Scan condition : 120kV、200mA、1 sec x 30 continuous
scans
(*2) Temperature in ( ) shows the condition while the equipment is
not in use. System shall be prevented from the dew
condensation.
(*3) The fluctuation of room temperature during operation time
shall be within the range of “±2℃
(*4) If the power supply voltage at site is 380/400/415/440 VAC,
use the provided system transformer.
(*5) In the service environment, the concentration of corrosive gas
must be 0.1 PPM or less and salt damage must be 0.02
Mg/cm2 or less.
-7- D1E-HC0056
5
Outside dimension and mass
-8- D1E-HC0056
6
Dimensions of system units
475
1,800 2,688
1,910
652
30° 30°
1,842.5
φ750
1,000
450
1,990
Unit : mm
-9- D1E-HC0056
6
Dimensions of system units
920
400
1,500 2,262
1,570
577
30° 30°
1,842.5
φ750
1,000
450
1,990
Unit : mm
- 10 - D1E-HC0056
6
Dimensions of system units
Intercom 400
244.6
745
85
min
Keyboard Mouse
Intercom Monitor
558.4
min : 423.5
max : 553.5
Main Unit
374
52
470
660
Unit : mm
Operator’s console
- 11 - D1E-HC0056
6
Dimensions of system units
Unit : mm
System Transformer※1
- 12 - D1E-HC0056
Specifications and physical appearance may be changed without prior
notice.
”Visionary CT 16”, “Intelli IP”, “IntelliEC”, “CEV”, “guideShot”,
“fatPointer”, “riskPointer”, “Hyper Q-Net” , “HiMAR” and “MARP” are the
registered trademarks or trademarks of Hitachi, Ltd. in Japan and other
countries.
“DUAL SHOT” is a registered trademark or trademark of Nemoto
Kyorindo Co., Ltd. in United States and other countries.
“SALIENT” is a registered trademark or trademark of Medtronic
Advanced Energy LLC in United States and other countries.
“CERTEGRA” is the registered trademarks or trademarks of BAYER
MEDICAL CARE INC. in the United States and other countries.
“Windows” is a registered trademark or trademark of Microsoft
Corporation in United States and other countries.
- 13 - D1E-HC0056