AI-200 COMPLIANCE OF MATERIALS AI-220 DIMENSIONAL CHECK OF
WITH REQUIREMENTS COMPONENT PARTS The Inspector shall assure him/herself that all materials The Inspector shall satisfy him/herself that: used comply in all respects with the requirements of this (a) head and shell sections conform to the prescribed Division. The Manufacturer shall submit to the Inspector shape and meet the thickness requirements after forming; certification of materials compliance (see AM-101). He/ (b) nozzles, manhole frames, reinforcement around she shall examine certified test reports or certificates of openings, and other appurtenances to be attached to the compliance for the materials used, except as otherwise inside or outside of the vessel fit properly to the curvature provided for in the material specification or in this of the vessel surface (see Fig. AD-912.1); Division. (c) the dimensional requirements have been met. This shall include making such dimensional measurements as he/she considers necessary. AI-201 Examination of Materials AI-220.1 Use of Templates. If required by the Inspec- See AF-112.1. tor, the Manufacturer of the vessel shall furnish accurately formed templates for his/her use (see AF-130).
AI-210 MARKING ON MATERIALS
AI-230 CHECK OF HEAT TREATMENT The Inspector shall inspect materials used in the con- PRACTICE struction to see that they bear the identification required by the applicable material specification, except as other- The Inspector shall satisfy him/herself that the Manu- wise provided in AM-105.1 and AM-105.2. Should the facturer has conducted all heat treatment operations identifying marks be obliterated or the material be divided required by this Division. Certificates furnished by the into two or more parts, the marks shall be properly trans- Manufacturer may be accepted as evidence that the heat ferred by the Manufacturer as provided in AF-102.1. treatment operations were correctly carried out.
214
Copyright ASME International
Provided by IHS under license with ASME Licensee=foster wheeler /5956413001 No reproduction or networking permitted without license from IHS Not for Resale, 10/09/2007 01:15:53 MDT