Professional Documents
Culture Documents
TR2
TR3 ®
Air-cooled
direct injection
diesel engines. TM
CONSTRUCTION
Cast iron crankcase for durability.
Large bearing surfaces for low bearing loads and long life.
ROTATION
Counter-clockwise, looking at the flywheel end.
COOLING
Air cooling by means of a highly efficient flywheel mounted fan.
Designed for continuous operation in ambients up to 52°C (125°F).
Oil cooling by means of air flow over deep crankcase finning.
LUBRICATION
Self regulating plunger type pump supplies oil under pressure
to all important bearing surfaces.
Full flow spin-on cartridge oil filter.
Oil service interval is 250 hours.
STARTING
Hand starting on the camshaft at the gear end.
Starting handles are available in both limited or non limited DRIVES
kickback versions. Full power is normally taken from the flywheel end.
Optional 12V electric starting. Auxiliary drives are available for the gear end.
Hydraulic pump adaptors are available.
GOVERNING
Mechanical governing is provided for either variable or MOUNTING
constant speeds depending on build. Hold-down feet are integral with the crankcase for base
Generating set governing is available for 1500 & 1800 r/min. mounting.
®
This information is intended for the assistance of users
and is based upon results obtained from tests performed
at the place of manufacture. This company does not
guarantee that the same results will be obtained
elsewhere under different conditions and in certain Lister-Petter Limited TM
applications. The information in this brochure does not
form a part of any contract, guarantee or warranty. We Dursley, Gloucestershire, GL11 4HS England
have made efforts to ensure that the information is © Copyright Lister-Petter Ltd.
accurate, but reserve the right to amend specifications Tel: +44 (0)1453 544141 E-mail: sales@lister-petter.co.uk August 1998
and information without notice and without obligation
or liability. Fax: +44 (0)1453 546732 http//www.lister-petter.co.uk 027-08848 Issue 7