Professional Documents
Culture Documents
PROBLEM Introduction
Plant operators are often faced with large numbers ARA continuously collects alarm and event data to
of alarms and abnormal situations making them provide statistical reports based on EEUMA 191,
unable to respond quickly enough to prevent safety ISA-18.2-2009 and IEC-62682. These reports aid
related incidents, environmental issues, shutdowns supervisors and managers to identify which alarms
and equipment damage. A poorly applied alarm and events are occurring most frequently and where
management policy resulting in excessive alarms the alarm management policy can be improved. Each
and events can also make operators routinely ignore report can be filtered and drilled down to desired
alarms due to the excessive amount of information levels, including individual alarm occurrences, and then
being received. exported to a number of file formats including PDF,
Word and Excel.
ARA can be installed on a single server and provides
SOLUTION access to multiple users via its intuitive web user
Exaquantum Alarm Reporting and Analysis interface, eliminating the need for any client software.
(Exaquantum/ARA; hereafter referred to as ‘ARA’)
is Yokogawa’s solution. Exaquantum/ARA assists In addition to the web user interface, authorized access
supervisors and managers in implementing effective to the data is provided via Excel and SQL Server
alarm management by highlighting patterns in alarm Report Builder, allowing custom reports to be created.
and event occurrences making it easier to identify and
correct areas of concern.
BENEFITS
• Reducing the number of distracting and nuisance
alarms allows operators to focus on and react faster
to abnormal situations with the proper corrective
action
• Reduced operator stress will improve reaction times
for incident resolution
• Improved plant safety and reduced risk of serious
environmental incidents
• Identification of improvement opportunities through
focused KPIs
• Consolidated alarm and process information can
be supplied in custom reports to provide additional
analysis information
• Information available to key stakeholders on demand F01E.ai
Custom Reports
Reports Overview In addition to the reports supplied with ARA, custom
ARA provides 46 reports (listed in the next page), reports can be created in:
grouped into the following four areas. • Excel - ARA data can be further analyzed and charted
• Management – providing a high-level overview of with process data from Exaquantum PIMS also
plant KPIs incorporated to produce a single report containing
• Performance – covering specific EEMUA 191 both alarm and process data
performance guidelines to quickly highlight potential • SQL Server Report Builder - Created in SQL Report
areas of concern Builder and accessed via the ARA web browser
• Operations – day-to-day operator reports covering menu of reports, these reports can be scheduled and
alarm rates and trends distributed
• Maintenance – highlighting problem alarms and
aiding in the alarm rationalization process
Web User Interface
Client access to ARA is provided via an intuitive web
Exaquantum/ARA Report Branding user interface, eliminating the need for specific client
Report styles are stored centrally in ARA, allowing style software. A central navigation bar provides links to
changes to be made easily and consistently across all each of the reports, localization options and other
reports. This ensures that company standards can be Exaquantum products.
adhered to in the production of reports. The web user interface is compatible with Microsoft
Internet Explorer with security provided through
Windows local and domain user groups.
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 36J40A20-01EN Oct. 18, 2016-00
<<Contents>> <<Index>> 3
Localization Reports
The ARA user interface can be seamlessly switched
between installed languages. ARA is provided with US Management Reports
English by default with support for additional languages • Alarm Overview
available on request – please contact your local • Alarm Rate KPIs
Yokogawa office for more information. • Area KPIs
• KPIs by Operator
• Shift
Centralized ARA server • Summary
ARA can be hosted on a central server with
Yokogawa’s Remote Data Synchronization solution Operation Reports
‘Exaquantum/RDS’ installed on remote Exaquantum • Alarm by Condition
servers worldwide to transfer Alarms & Events to the • Alarm by Condition and Tag
central server via the internet. This allows alarms to be • Alarm Flood
analyzed from each connected remote site. Process • Alarm Frequency
data can also be transferred. • Alarm Peak
• Alarm Rate
Alarm Rationalization using Exaquantum/ARA with • Alarm Rationalization Progress
Exaquantum/AMD (Alarm Master Database) • Alarm Responsiveness
Alarm rationalization can be provided by using • Alarm Setting Change
Exaquantum/ARA with Yokogawa’s Master Alarm • Area Alarm Counts
Database solution ‘Exaquantum/AMD’. • Consequential Alarms
• Event Balanced Trend
Exaquantum/ARA provides a comprehensive set • High Integrity Pressure Protection System (HIPPS)
of reports in order to understand the performance (*1)
of the system and to identify problem areas. Once • Shelved Events
such problem alarms have been identified, the alarm • System Alarms
settings can then be modified using Exaquantum/ • Top Alarms
AMD’s comprehensive Management of Change (MOC) • Top Alarms by Operator
environment. • Valve Travel Time (VTT) (*1)
Performance Reports
• Area Alarm Average
• Area Alarm Peak
• Area Performance
Maintenance Reports
• Active Alarms
• Active Events
• Active Suppression Events
• Alarm Messages Segregation
• Bad Actors
• Bad Actors by Condition
• Calibration Events
• Chattering Alarms
• Duplicate Alarm Analysis
• Force
• Long Standing Alarms
• Mode Change
• MV/SV Changes
• Override
• PID Changes
• Range Changes
• Summary of Operator Changes
• Suppressed Alarms
• Suppressed Alarms by Tag
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 36J40A20-01EN Mar. 16, 2018-00
<<Contents>> <<Index>> 4
Hardware and Software Models and Suffix Codes
Requirements Exaquantum/ARA Product
Minimum Hardware and Software Specifications Description
Model NTPC002 Exaquantum/ARA Product
Minimum Hardware and
Component
Software Specification -S Basic Software license
For detailed specification information, 1 New Order (with Media)
refer to the following description in
“Exaquantum GS (GS 36J04A10-01E).” 1 English version
Hardware:
Suffix Enter number of Exaquantum/
Hardware Operating Environment -SV
Codes ARA Server Licenses (01 - 99)
Exaquantum/ARA “Exaquantum Server”
Server Software: Enter the number of discounted
Software Operating Environment -SD Exaquantum/ARA Server
“Exaquantum Server” Licenses (01 - 99)
-YYYY Select an Option Code
For detailed supported revision, please
Enter the number of New per-seat
refer to “GS 36J40W10-01EN.”
/WC Exaquantum/ARA Web Client
For detailed specification information, Licenses (01 - 99)
refer to the following description in
Enter the number of 50%
“Exaquantum GS (GS 36J04A10-01E).”
Hardware: /WD discounted Exaquantum/ARA
Web Client Licenses (01 - 99)
Hardware Operating Environment
Exaquantum/ARA “Web Server” Enter the number of Exaquantum/
Web Server Software: /DAA ARA OPC DA 2.05a Server
Software Operating Environment Interface Licenses (01 - 99) (*10)
“Exaquantum Web Server” Enter the number of Yokogawa
/CFH CAMS for HIS Interface Licenses
For detailed supported revision, please (01 - 99) (*1)
refer to “GS 36J40W10-01EN.” Enter the number of Yokogawa
For detailed specification information, /FTA FAST/TOOLS Interface Licenses
refer to the following description in (01 - 99) (*2)
“Exaquantum GS (GS 36J04A10-01E).” Enter the number of Emerson
Hardware: /EDA DeltaV R10.3 Interface Licenses
Hardware Operating Environment (01 - 99) (*3)
“Exaquantum Use PCs”
Exaquantum/ARA Enter the number of Honeywell
Software:
Web Clients Option /HEA Experion R300 Interface Licenses
Software Operating Environment
Codes (01 - 99) (*4)
“User PCs for Exaquantum/Explorer,
Exaquantum/Web Client” Enter the number of GE
/GEA CIMPLICITY V9.0 Interface
For detailed supported revision, please Licenses (01 - 99) (*5)
refer to “GS 36J40W10-01EN.” Enter the number of ABB 800xA
DCS (with an Advant AC450
The Exaquantum/ARA Release Notes provide exact /ABA
Controller) Interface Licenses (01
details of the supported hardware and software. - 99) (*6)
If ARA will be installed on a different version of Enter the number of Schneider
Exaquantum, please contact Yokogawa for assistance. /CTA Electric CitectSCADA V7.30
Interface Licenses (01 - 99) (*7)
Enter the number of Schneider
Electric CitectSCADA (with
/CTB Kepware’s ‘KEPServerEX’ V5
connector) Interface Licenses (01
- 99) (*8)
Enter the number of Yokogawa
CAMS for HIS Interface Licenses
/CHX
for 3rd Party Systems (01 - 99)
(*9)
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 36J40A20-01EN Apr. 1, 2018-00
<<Contents>> <<Index>> 5
*1: Order when one or more CENTUM CS 3000 Maintenance Service for Exaquantum/ARA
R3.08.70 (or later) or CENTUM VP R4.02 (or
Description
later) DCSs are installed where CAMS for HIS
is operational. Purchase only one license per Maintenance Service for
Model SV3NTMC002
Exaquantum server. Must be installed on a Exaquantum/ARA
server containing an approved Exaquantum/ARA -S Annual Contract
software release.
*2: Purchase only one FAST/TOOLS license per 1 Always 1
Exaquantum server. Must be installed on a
1 Always 1
server containing an approved Exaquantum/ARA
software release. Enter the number of
Suffix
*3: Order when one or more Emerson DeltaV R10.3 -SV Exaquantum/ARA Server
Codes
OPC A&E R1.0, R1.1 or R1.2 servers are to be Licenses (01 - 99)
connected to Exaquantum. Purchase only one -YYYY Select an Option Code
license per Exaquantum server. Must be installed
on a server containing an approved -N New
Exaquantum/ARA software release. If DeltaV
-R Renewal
R10.3 is not installed then please contact
Yokogawa.com for assistance. Enter the number of New per-
*4: Order when one or more Honeywell Experion /WC seat Exaquantum/ARA Web
R300 OPC A&E R1.0, R1.1 or R1.2 servers are Client Licenses (01 - 99)
to be connected to Exaquantum. Purchase only Enter the number of
one license per Exaquantum server. Must be Exaquantum/ARA OPC DA
installed on a server containing an approved /DAA
2.05a Server Interface Licenses
Exaquantum/ARA software release. If Honeywell (01 - 99)
Experion R300 is not installed then please contact
Enter the number of Yokogawa
Yokogawa.com for assistance.
/CFH CAMS for HIS Interface Licenses
*5: Order when one or more GE CIMPLICITY V9.0
(01 - 99)
OPC A&E R1.0, R1.1 or R1.2 servers are to be
connected to Exaquantum. Purchase only one Enter the number of Yokogawa
license per Exaquantum server. Must be installed /FTA FAST/TOOLS Interface Licenses
on a server containing an approved (01 - 99)
Exaquantum/ARA software release. If GE Enter the number of Emerson
CIMPLICITY V9.0 is not installed then please /EDA DeltaV R10.3 Interface Licenses
contact Yokogawa for assistance. (01 - 99)
*6: Order when one or more ABB 800xA DCS Advant Enter the number of Honeywell
AC450 Controller OPC A&E R1.0, R1.1 or R1.2 Option /HEA Experion R300 Interface
servers are to be connected to Exaquantum. Codes Licenses (01 - 99)
Purchase only one license per Exaquantum
server. Must be installed on a server containing Enter the number of GE
an approved Exaquantum/ARA software release. /GEA CIMPLICITY V9.0 Interface
If an Advant AC450 Controller is not installed then Licenses(01 - 99)
please contact Yokogawa for assistance. Enter the number of ABB 800xA
*7: Order when one or more Schneider Electric DCS (with an Advant AC450
/ABA
CitectSCADA V7.30 OPC A&E R1.0, R1.1 or Controller) Interface Licenses
R1.2 servers are to be connected to Exaquantum. (01 - 99)
Purchase only one license per Exaquantum Enter the number of Schneider
server. Must be installed on a server containing /CTA Electric CitectSCADA V7.30
an approved Exaquantum/ARA software release. Interface Licenses (01 - 99)
If CitectSCADA V7.30 is not installed then please
Enter the number of Schneider
contact Yokogawa for assistance.
Electric CitectSCADA (using
*8: Order when one or more Schneider Electric /CTB
Kepware’s ‘KEPServerEX’ V5)
CitectSCADAs with Kepware’s ‘KEPServerEX’
Interface Licenses (01 - 99)
V5 OPC A&E R1.0, R1.1 or R1.2 servers are to
be connected to Exaquantum. Purchase only Enter the number of Yokogawa
one license per Exaquantum server. Must be /CHX CAMS for HIS Interface Licenses
installed on a server containing an approved for 3rd Party Systems (01 - 99)
Exaquantum/ARA software release. If Kepware
V5 is not installed then please contact Yokogawa
for assistance.
*9: This a standalone installation to provide CAMS
ORDERING INFORMATION
for HIS interface access to third party products Specify the model and suffix codes.
only. Please note that this CAMS for HIS interface
and Exaquantum/ARA cannot be installed on the
same server. Trademarks
*10: The Exaquantum/ARA OPC DA 2.05a server · Exaquantum, Exaopc, FAST/TOOLS, and CENTUM
will provide Exaquantum/ARA KPIs. Purchase are either registered trademarks or trademarks of
only one license per Exaquantum server. Must Yokogawa Electric Corporation.
be installed on a server containing an approved · All other company or product names appearing in this
Exaquantum/ARA software release.
document are trademarks or registered trademarks of
their respective holders.
All Rights Reserved. Copyright © 2016, Yokogawa Electric Corporation GS 36J40A20-01EN June 22, 2018-00
Subject to change without notice.