The document contains G-code instructions for machining a part using two toolpaths: a pocket operation and a profile operation. A 3mm endmill is used to cut pocket features to depths of 1.333mm, 2.667mm, 4mm, 5.333mm, 6.667mm, and 8mm from the top of the material. It also outlines cutting a profile around the perimeter of the material to depths of 1.25mm, 2.5mm, 3.75mm, and 5mm.
The document contains G-code instructions for machining a part using two toolpaths: a pocket operation and a profile operation. A 3mm endmill is used to cut pocket features to depths of 1.333mm, 2.667mm, 4mm, 5.333mm, 6.667mm, and 8mm from the top of the material. It also outlines cutting a profile around the perimeter of the material to depths of 1.25mm, 2.5mm, 3.75mm, and 5mm.
The document contains G-code instructions for machining a part using two toolpaths: a pocket operation and a profile operation. A 3mm endmill is used to cut pocket features to depths of 1.333mm, 2.667mm, 4mm, 5.333mm, 6.667mm, and 8mm from the top of the material. It also outlines cutting a profile around the perimeter of the material to depths of 1.25mm, 2.5mm, 3.75mm, and 5mm.