The document contains G-code instructions for cutting a profile using an end mill tool along a toolpath called "Perfilado 1". It specifies moving the tool to cut along an X-Y coordinate path from (0,0) to (25.196,-4.913) in the Z-direction to a depth of -0.1, using feed rates between 700-1500 mm/min. The profile is cut out of a material 74mm wide by 315mm long by 2mm thick.
The document contains G-code instructions for cutting a profile using an end mill tool along a toolpath called "Perfilado 1". It specifies moving the tool to cut along an X-Y coordinate path from (0,0) to (25.196,-4.913) in the Z-direction to a depth of -0.1, using feed rates between 700-1500 mm/min. The profile is cut out of a material 74mm wide by 315mm long by 2mm thick.
The document contains G-code instructions for cutting a profile using an end mill tool along a toolpath called "Perfilado 1". It specifies moving the tool to cut along an X-Y coordinate path from (0,0) to (25.196,-4.913) in the Z-direction to a depth of -0.1, using feed rates between 700-1500 mm/min. The profile is cut out of a material 74mm wide by 315mm long by 2mm thick.