Professional Documents
Culture Documents
Autodesk Inventor Assessment 1
Autodesk Inventor Assessment 1
Type of Test :
Mandatory Test
Engineering Scope :
1
Background :
Congratulation, you are accepted as Process Engineer at
SigmaGo BikeCo. Your first project is create SigmaGon Premier
5.0 frame. This frame will be use for Static Simulation.
Direction :
In this test you will create Frame Bike Modeling, it’s call
SigmaGo
Dimension of this frame is :
2
The method you can apply to this test is :
Good Luck
3
SigmaGo Premier 5.0