Professional Documents
Culture Documents
20
7
DETAIL A
1416.7
1081.5
1314.1
848.9
SCALE 1/5
746.3
618.6
153.4
1445
12.2
36.9
386
163.6
0
494
459 457.6
424 FAN SHROUD N8
31.8
234
309.6
SEE DETAIL B
230.9
C 161.6 C
5 28.6
44 36
0 13.6 0
7.2
1489 1.8
23.5
1454.8
SEE DETAIL A
33.8
D DETAIL B D
SCALE 1/5
0
ITEM
NO PART NUMBER QTY DESCRIPTION
2 193U6051_02 1 193U6051_02
739.3
1476.6
1395.3
3 193U6051_03 1 193U6051_03
E 4 EDGE-FLANGE1 1 edge-flange1.prt E
Notes:
-Material: Galvanized Sheet 1.61mm thick, according to General
Tolerances
Drawing Status : Change in progress
NBR 7008- ZC - M - Z100 (zinc coating 100g/m²);
Table Surface Area (m2) Key characteristic
-Finish: Epoxi powder coat, Dark Grey RAL-7024 Critical characteristic
Estimated Mass (Kg) 3250815.277 According to Danfoss
thickness 50µm to 100µm. Projection Size
See notes Scale standard 502Z0024
-Remove sharp edges. 7/100 A3 Material : See Notes
-Edges must be welded inside the base. AA 15-07-2020 Designation
Roughness (µm)
-All threads must be free of paint. Revision ECR Number Date
-Specified tolerances are for piece without painting. FAN SHROUD Q8, FAN MOTOR 550MM - GREY
F Designer GUSTAVO FREITAS
-All diameters and Rivet nuts must be inspected. Approval DENER LEMOS
-In accordance with negative list of Danfoss 500B0751. ISO 8015 Confidential: Property of Danfoss Commercial Compressors. Not to be handed Sheet 1 of 5
-In accordance with the RoHS standard.
ISO 1101 over to copied or used by third party. Two or three dimensional reproduction
of contents to be authorized by Danfoss CC. AA.2 Dwg N° 193U6051 AA
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
4.5
1.8
33.8
A A
62
7.2
148.8
44.8
43.8
156
31.8
B B
22
0
924
903.5
874
822
41.39
684
RIGHT COVER
C 524.5 C
494
5.2
424 413
7.2
234
5 85.5
D 44 43 D
36
0 0 6.6 0
87.6
38.9
0
53.6
87.6
E Notes: E
-Material: Galvanized Sheet 1.61mm thick, according to General
Tolerances
Drawing Status : Change in progress
NBR 7008- ZC - M - Z100 (zinc coating 100g/m²);
Table Surface Area (m2) Key characteristic
-Finish: Epoxi powder coat, Dark Grey RAL-7024 Critical characteristic
Estimated Mass (Kg) 3250815.277 According to Danfoss
thickness 50µm to 100µm. Projection Size
See notes Scale standard 502Z0024
-Remove sharp edges. 1/10 A3 Material : See Notes
-Edges must be welded inside the base. AA 15-07-2020 Designation
Roughness (µm)
-All threads must be free of paint. Revision ECR Number Date
-Specified tolerances are for piece without painting. FAN SHROUD Q8, FAN MOTOR 550MM - GREY
F Designer GUSTAVO FREITAS
-All diameters and Rivet nuts must be inspected. Approval DENER LEMOS
-In accordance with negative list of Danfoss 500B0751. ISO 8015 Confidential: Property of Danfoss Commercial Compressors. Not to be handed Sheet 2 of 5
-In accordance with the RoHS standard.
ISO 1101 over to copied or used by third party. Two or three dimensional reproduction
of contents to be authorized by Danfoss CC. AA.2 Dwg N° 193U6051 AA
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
7.2
148.8
120.3
37.5
0
A A
85.8 73.6
42 51.8
30
0
1.8
4.5
63.8
44.4
42.8
85.8
B B
684
31.75
C 524.5 LEFT COVER C
494
459 924 5
424 413
234
85.5
D 44 43 D
0 0
0
0
34
85.8
46.9
156
55.8
E Notes: E
-Material: Galvanized Sheet 1.61mm thick, according to General
Tolerances
Drawing Status : Change in progress
NBR 7008- ZC - M - Z100 (zinc coating 100g/m²);
Table Surface Area (m2) Key characteristic
-Finish: Epoxi powder coat, Dark Grey RAL-7024 Critical characteristic
Estimated Mass (Kg) 421446.186 According to Danfoss
thickness 50µm to 100µm. Projection Size
See notes Scale standard 502Z0024
-Remove sharp edges. 2/25 A3 Material : See Notes
-Edges must be welded inside the base. AA 15-07-2020 Designation
Roughness (µm)
-All threads must be free of paint. Revision ECR Number Date
-Specified tolerances are for piece without painting. FAN SHROUD Q8, FAN MOTOR 550MM - GREY
F Designer GUSTAVO FREITAS
-All diameters and Rivet nuts must be inspected. Approval DENER LEMOS
-In accordance with negative list of Danfoss 500B0751. ISO 8015 Confidential: Property of Danfoss Commercial Compressors. Not to be handed Sheet 3 of 5
-In accordance with the RoHS standard.
ISO 1101 over to copied or used by third party. Two or three dimensional reproduction
of contents to be authorized by Danfoss CC. AA.2 Dwg N° 193U6051 AA
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
A A
3.6
B B
905.2
MIDDLE COVER
C C
16.4 119
D D
E Notes: E
-Material: Galvanized Sheet 1.61mm thick, according to General
Tolerances
Drawing Status : Change in progress
NBR 7008- ZC - M - Z100 (zinc coating 100g/m²);
Table Surface Area (m2) Key characteristic
-Finish: Epoxi powder coat, Dark Grey RAL-7024 Critical characteristic
Estimated Mass (Kg) 3250815.277 According to Danfoss
thickness 50µm to 100µm. Projection Size
See notes Scale standard 502Z0024
-Remove sharp edges. 1/10 A3 Material : See Notes
-Edges must be welded inside the base. AA 15-07-2020 Designation
Roughness (µm)
-All threads must be free of paint. Revision ECR Number Date
-Specified tolerances are for piece without painting. FAN SHROUD Q8, FAN MOTOR 550MM - GREY
F Designer GUSTAVO FREITAS
-All diameters and Rivet nuts must be inspected. Approval DENER LEMOS
-In accordance with negative list of Danfoss 500B0751. ISO 8015 Confidential: Property of Danfoss Commercial Compressors. Not to be handed Sheet 4 of 5
-In accordance with the RoHS standard.
ISO 1101 over to copied or used by third party. Two or three dimensional reproduction
of contents to be authorized by Danfoss CC. AA.2 Dwg N° 193U6051 AA
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
A A
10.1
25 5
B B
25 3.3
BRACKET
C C
R 12.5 R2
6.6
25.8
D D
E Notes: E
-Material: Galvanized Sheet 1.61mm thick, according to General
Tolerances
Drawing Status : Change in progress
NBR 7008- ZC - M - Z100 (zinc coating 100g/m²);
Table Surface Area (m2) Key characteristic
-Finish: Epoxi powder coat, Dark Grey RAL-7024 Critical characteristic
Estimated Mass (Kg) 3250815.277 According to Danfoss
thickness 50µm to 100µm. Projection Size
See notes Scale standard 502Z0024
-Remove sharp edges. 1/10 A3 Material : See Notes
-Edges must be welded inside the base. AA 15-07-2020 Designation
Roughness (µm)
-All threads must be free of paint. Revision ECR Number Date
-Specified tolerances are for piece without painting. FAN SHROUD Q8, FAN MOTOR 550MM - GREY
F Designer GUSTAVO FREITAS
-All diameters and Rivet nuts must be inspected. Approval DENER LEMOS
-In accordance with negative list of Danfoss 500B0751. ISO 8015 Confidential: Property of Danfoss Commercial Compressors. Not to be handed Sheet 5 of 5
-In accordance with the RoHS standard.
ISO 1101 over to copied or used by third party. Two or three dimensional reproduction
of contents to be authorized by Danfoss CC. AA.2 Dwg N° 193U6051 AA
1 2 3 4 5 6 7 8