You are on page 1of 3

22/09/2020 C9.

3 Marine Generator Set C9300001-UP(M0069296 - 27) - Documentation

Previous Screen
Welcome: judhmh
Product: GENERATOR SET
Model: C9.3 GENERATOR SET C93
Configuration: C9.3 Marine Generator Set C9300001-UP

Specifications
C9.3 Marine Engines
Media Number -UENR0958-03 Publication Date -01/02/2015 Date Updated -06/12/2019

i07946504

Connecting Rod
SMCS - 1218

S/N - CP91-UP

S/N - C931-UP

S/N - CA91-UP

Part Number - 256-9658


S/N - C931-UP

Part Number - 256-9658


S/N - CA91-UP

Part Number - 256-9658


S/N - CP91-UP

S/N - PPM1-UP

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpa… 1/3
22/09/2020 C9.3 Marine Generator Set C9300001-UP(M0069296 - 27) - Documentation

Illustration 1 g06492348
Typical example

Table 1
Item Qty Part Specification Description
Lubricate the rod and piston group with clean engine oil before inserting the rod and piston group into the
block.
256-
1 1 9656 The bearing joint must be within ± 5 degrees of either location.
Bushing
160- Use the following procedure to tighten the bolts:
2 2 8197 1. Tighten the bolts to 50 ± 5 N·m (37 ± 4 lb ft).
Bolt 2. Again, tighten the bolts to a torque angle of 90 ± 5 degrees.
Bore in the connecting rod for the 256-9656 Bushing is 54.630 ± 0.013 mm
D1 - -
(2.1508 ± 0.0005 inch).
The connecting rod may be heated from 175 to 260 °C (347 to 500 °F) for the
D2 - - installation of the bushing. Maximum distance for heating the connecting rod is
85 mm (3.3 inch).
Bore in the bushing for the piston pin is 50.035 ± 0.008 mm
D3 12 -
(1.9699 ± 0.0003 inch).
D4 - - Distance between the center of the bushings is 217 mm (8.5 inch).
Bore in the connecting rod for the crankshaft bearing is 85.000 ± 0.013 mm
D5 - -
(3.3465 ± 0.0005 inch).
Thoroughly lubricate the piston pin with clean engine oil prior to assembly of
- - -
the piston and connecting rod.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpa… 2/3
22/09/2020 C9.3 Marine Generator Set C9300001-UP(M0069296 - 27) - Documentation

Copyright 1993 - 2020 Caterpillar Inc. Tue Sep 22 2020 17:33:23 GMT+0700 (Indochina Time)
All Rights Reserved.
judhmh
Private Network For SIS Licensees.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpa… 3/3

You might also like