g
Directorate, CPWO
g/osn/40
INIRMAN BHAWAN, NEW DELHI ~ 3110012.
‘This issue with the approval of DG, CPWD.
(NIRMAN BHAWAN NEW DELHI DATED: 6G 08/2019 _
‘OFFICE MEMORANDUM
‘Sub Correction slip no 8 Delhi Schedule of Rates 2038,
‘The following modification in exstngitems and inclusion of new tems in DSR-201B under SH: 26 (New Technologies and Materials)
DsR2018 | Description of em (Existing) [Unit [ Rateor ]O5R Description often (Proposed) [Unit [Rate or | Remarks
(tem Wo) ps | 2019 sk 2019
2018 | (tem
0)
2642 | Providing and Tong of eternal wall Providing and Thing of exteral wal
system on Ught gauge ste! frame work system om tight gauge ste! frame work
‘with Outer face having mm tick heavy with Outer face cement boards 36 per
uty fiber cement board fixed on Sem standard ies fied with searing / -
thick heavy duty fiber cement board taping Screws / fasteners @ 60cm cc of
oafeming to 15 14862:2000, category approved make. A groove of 2 mm to
type & (High pressure stem cured) 35 5mm shall be maiatained and grooves
ber standard ses fixed with sel ding Shall be sealed with scan based
raping screws /fateners @ 6m cfeot Sealant. The board shall be fied in 3
approved make. A groove of 2 mm to staggered patter. Screws shall be of
Sim shall be maitained and grooves ‘counter sunk rib head of 1.60mm to ¢
shall be sealed with sion based slant. mm thick or 8 t0 10 gauge of length
‘The board shal be fed in 9 staggered ‘ating om 25 to A5 mm an Internal
pattern. Screws shall be of countersunk face 125 mm thick gypsum plaster
Fb head of 160mm to 4 mm thick of 8 board fred on cement board 2s per
10 gauge of length varying from 25 *0 standard sites fied with se dling /
«smm {nd internal ace | taping screws | fasteners @ 60cm cle of
2.5mm thik gypsum plasterboard ined | __Laproved make, proper tapiog and)
1 .
Wn enw‘on mm Sick fiber cement board
Confirming to 15 148622000 of eategory
Ittype B (high pressure steam cured) a
pet standard ses fled with self diling
raping serews/ fasteners @ 60cm cicot
tpproved ‘make, proper taping and
jointing to be done using ber mesh tape
nd epony and. acre based jointing
Compound for seamless fnish,cost of
frame work tobe paid for separate)
aaags
Jointing to Be done using Fer mesh
ape and epoxy and servic based
jalnting compound for seamless
finish cost of frame work tobe pald for
separately)
wand
‘uter face! Outer face faving 6mm
thick fiber cement board ied on Sum
‘thick fiber cement board, Type A, a8 per
15'14862:2000 (high pressure steam
cure)
nner Face = 12.5 mm thick gypsum
plster board conforming to. 1S
2095: fied on thick fibre
‘Cement board confirming 10
15:14862:2000 of type 8 (Mighpressure
steam cured)
anags
isting
Dstt
Wada
“Guter faces Outer face having & mm
thick cement bonded paride Board
fixed on 10 mm thick cement bonded
partie board. (Temite, Fre and
Moisture Resistance) as per 1S
34276:1995.
Inner face-12.5 mm thick gypsum
plaster board conforming to. 1S
2095:2011 fied on 8 mm thick cement
‘bonded particleboard (Termite, fire and
Imosture resistance). confirming. to
'ss02761995),
2697.90
Newritern
sled 32
36022
Vee
eC).6A3 | Providing and Ting internal wal panels "2645 | Providing and fing internal wal panels
fon Light gauge stel fame work with fon Light gauge steel frame work with
425mm thick gypsum plaster board 2.5mm thick gypsum plaster board
conforming 1 2095:2011 fied on 8mm conforming. IS 2095:2011 fared on
thick fber cement board conforming Cement board a5 per standard sizes
15 14862:20 of category Il type 8 (High fined with selF-dling / taping screws /
pressure steam cured) as per standard fasteners @ 60cm cle of approved
Shes fhed with selt-riing / taping make, screws shall be of countersunk
Screws [fasteners @ Glem ce of ‘ib heed of 160mm to & men thick oF &
approved make, Screws shall be of to 10 gauge of length varying from 25 0
Counter sunk rib head of 1.60mm to 4 45mm. Proper taping and ining to be
Imm thick of 8 to 10 gauge of length ‘done using fiber mesh tape and epoxy
‘varying from 25 t0 4S mm, Prope taping ‘and acrylic based jnting compound for
and oiting to Be done using ber mesh Seamless finish (cost of frame work to
tape and eposy and. acrylic based be paid or separately)
jointing compound for seamless
finish (cost of frame work to be paid for) |.
separate) et eee
‘Cement Fiber fcard® mer thick ae periS
14862:2000 of type B High pressure isting
ie z 264a.1 | steam cued) sqm _| 221895 | osnitem
‘Cement Bonded parce board @ mm rane
{Termite Fre & Moisture Resistance), flames
26.432 | # per 1826276: 1905 som | 180875 | 26432
3645 | Supplying and instalation of moisture 26.5 | Supplying and instalation of moisture
resistan/e resistant 6 mm tick Heavy ‘esistan/re resistant cement board 25
faty flee cement board (High pressure per standard ies ied with self dling
steam cored) conforming 015 J taping screws. Screws shall be of
14862:2000 of category type 8 as per ‘countersunk rib head of 1.60mm to 4
standard sves fed with self-ling / ‘um thick or 8 to 10 gauge of length
taping screws crews shall be of counter varying rom 25 0 48 mm.
snk head of 1 60mm to 4 mm tick
128 to 10 gauge of length varying rom
25t045 mm.
— som | 793.
Ww SiSey
> Wi— Cement Fiber Board 6 mm tick as pers
188622000 of type B (High pressure
steam cured) existing
- 26.45. _| sqm_| 1179.30 | ose item
‘Cement Bonded parce board 8 rim a
‘thick (Termite, Fre & Moisture aes
= as. | Resistance) aspert6:0276:1995 | sam | sooo | 26452
No, 1338 TASYCSDSR2019/ 197. fo
Ypo'
Wins
Executive Engineer (TAS-t)
SQ, CPWO, Nieman Bhawan,
New Delhi
Dated: 06 08/2019
copy to Allthe SDG/ADG/CEs/CPMs through CPW website http://epwad.govin
‘executive Engineer (TAS)