Professional Documents
Culture Documents
ANMAR METROLOGY.
A TRANSCAT´S
A TRANSCAT´S CALIFORNIA
CALIFORNIA CALIBRATION
CALIBRATION LABORATORY.
LABORATORY.
The reported calibration(s) are accredited by the American Association of Physicist in Medicine (AAPM)
and/or the American Association of Laboratory Accreditation (A2LA) to the ISO/IEC 17025:2005 standard.
Calibrations are directly traceable to System of Units (SI) through the National Institute of Standards and
Technology (NIST)) or other recognized National Metrology Institute (NMI).
For additional information about our accreditation status and scope of service, visit transact website:
www.transcat.com
ANMAR METROLOGY.
ELECTRONIC CALIBRATION
CALIBRATION LABORATORY.
LABORATORY.
This calibration is compliant with the ISO/IEC 17025:2005 standard,
and is accredited by the AAPM and the American Association for Laboratory Accreditation.
This calibration is directly traceable to the National Institute of Standards and Technology (NIST). The expanded uncertainty of
measurement as stated in the data page of this report is the standard uncertainty of measurements
measu multiplied by the coverage factor k=2,
which for a normal distribution corresponds to a coverage probability of approximately 95%. This report shall not be reproducedexcept
in full, without the written permission of the ANMAR METROLOGY-ECL.
METROLOGY
ANMAR METROLOGY.
ELECTRONIC CALIBRATION
CALIBRATION LABORATORY.
LABORATORY.
This calibration is compliant with the ISO/IEC 17025:2005 standard,
and is accredited by the AAPM and the American Association for Laboratory Accreditation.
V Bias Main Load (Guard Resistance with respect to connector outer shell)
+100%: 124.3 V 300 ohms.
________________________________ _______________________________
Calibrated By: Reviewed By:
Carlos A. Zamora. B.S. Accredited Electronic Calibration Laboratory
Accredited Electronic Calibration Laboratory Advisory Committee Member or Designee
Calibrated: 12/19/2017
Cal. Due: 21/18/2019
By: CAZ