}O0/-26€2 Josueg aunjeveduies oup 10) 219 Wg
HEY epinD ey) 40 epIs wionog(wui pp seyewerp “xew) uw 99g |" wi | Sem 10} payns exe aoinap BuIdwejo oy) wos smel seuleIOs
eq PUP prEMIO 1eq s9}aUN ey) enow oj Aresss0oU
SUO}}ORS $8019 315554) BY JO}
dn y senow yorum s6unds yim BulpinB e uo pajunow si seq sajew ayy
4eq o1seq
‘ay Je palunow parejas! eolnep Burdures
print
-ni#n sdey eBeyon
(-1/41) uonoeuuco queuuno juewe:nseow pue eomep Buldurejo um Joeym ayebuo[0 @/qe0Technical Data
The clamping device i
been ensured at copper wire by t
means of a spin
Measurement length:
Clamping device for cross sections of
Distance between voltage and current-clamp:
Dimensions (height x width x depth):
Weight:
is designed for cross sections of 1...
he distance of approx. 420 mm between current
idle so that the immersed test unit can be stretc
Pt100 Sensor
2392-V001
Terminal at the
rear of 2304
and voltage-clamp.
hed. This is partially advantageous in
1000 mm
4....1500 mm? of (max. diameter 44 mm)
approx. 420 mm
approx. 170 x 2100 x 250 [mm]
approx. 25 kg
_.1500 mm?, The measurement fength is 1000 rm
im. A uniform dist
The clamp support is
the case of large cro%
4 +U UT
4-wire lead
‘Model 2381-V0O1
tribution of current has
laterally adjustable by
ss-sections.burster
Clamping Device Model 2381-V001
1). The leads of the potential
The clamping device on the left and right side is also for the connection of the measurement current (+1 and
taps are marked with +U and -U
Holder with 6mm hole for the temperature sensor 2392-V001
In to the measurement device
Hand wheel to The connec
the 2 m length lead with 4
the wire happens wit
banana plugs
Model 2381-V00t
Potential tap 1000 mm length with V-shaped contacts