a
®
a
oO
eI
o
3
3
o
a
REFERENCES
10.
u
12,
13.
4,
ANSI AI18.1 : 1999
Specification for dry-set Portland cement mortar
ANSI A118.3 : 1999
Specification for chemical resistant, water cleanable tle setting and grouting epoxy water cleanable, the setting
epoxy adhesive
ANSI A118.4 ; 1999.
Specification for latex Portland cement mortar
ANSIAI36.1
‘Organic adhesives for installation of ceramic tile
ASTM C241
Standard test method for abrasion resistance of stone subjected to foot trafic
ASTM €503
Standard specification for marble dimension stone(exterios)
ASTM €568
Standard specification for limestone dimension stone
ASTM C615
Standard specification for granite dimension stone
ASTM €629
Standard specification for slate dimension stone
ASTM C920
Standard specification for elastomeric joint seal
BS 9385 Part 5: 1994
Code of practice for the design and installation of terrazzo tile and slab, natural stone and composition block
floorings
BS 5980: 1980
Specification for adhesives for use with ceramic tiles and mosaics
BS 8298: 1994
‘Code of practice for design and installation of natural stone cladding and lining
EN 1324 (1998)
Adhesives for tiles: determination of sheer adhesion strength of dispersion adhesives15.
16.
17.
18,
19.
20.
a
22.
24.
25
26.
27,
EN 1348 (1998)
Adhesives for tiles: Determination of tensile adhesion strength for cementitious adhesives
EN 1925
Natural stone cest methods — Determination of water absorption coefficient by capillary
EN 1936
[Natural stone test methods — Determination of real density and apparent density and of total porosity and
‘open porosity
EN 12002 (1997)
Adhesives for tiles: Determination of transverse deformation for cementitious adhesives and grouts
EN 12003 (1997)
Adhesives for tiles: Determination of sheer adhesion strength of reaction resin adhesives
EN 12004:2001
Adhesives for tiles: Definition & specifications
EN 12407
Natural stone test methods ~ Petrographic examination,
EN 12808-1
Adhesives and grouts for tiles Part 1: Decermination of chemical resistance of reaction resin morcats
EN 12808-2
Adhesives and grouts for tiles ~ Part 2: Determination of resistance of abrasion
EN 12808-3
Adhesives and grouts for tiles ~ Part 3: Determination of flexural and compressive strength,
EN 12808-4
Adhesives and grouts for tiles ~ Part 4: Determination of shrinkage
EN 12808-5
Adhesives and grouts for tiles ~ Part 5: Determination of water absorption
SS CP 68 : 1997
Code of practice for ceramic wall and floor tiling
o
®
8
c
2
5
2
®
ac