Professional Documents
Culture Documents
TELESTYLE
* T h e p r o d u c t s a r e p r o t e c t e d u n d e r I . P. R i g h t s
triatower
mosaictower
heidi
lancepole
starpole
flagstyle
wingstyle
telestadium
citypole
TELESTYLE triatower
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
triatower
To minimize environmental impact of antenna supporting structures, calzavara has created triatower vertical
architecturally blended structures. The result combines technology and functionality with present-day aesthetic
needs in both large and small urban areas.
The triangular supporting structure consists of three legs joined together by hidden flanges and stiffened by design
steel bar tie rods recessed in the thickness of the fixing plate. The intersection of the tie rods is enclosed in a
shaped steel cover that is a design feature.
The summit shrouding is made of light blue Vitroplex, a radio-electrically transparent material that resembles
frosted glass. Corner components, in hot-formed sheet, follow the rounded triangular shape of the structure.
The antennas are fixed by a Ø 114 mm mount, fitted inside the Vitroplex top. Within the top structure, which is
divided into three or four different modules, depending on the tower height, it is possible to install up to 6 panel
antennas and up to 2 dish antennas (max. diameter 60 cm), for each module. The installation of several modules
at the top of the tower makes triatower, suitable for multi-operator use.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <0.5°
The standard supply provides the minimum configuration required for tower
commissioning, excluding radiant systems and mounts.
• Foundation set
• Supporting structure, divided into sections
• Vitroplex shrouding at the summit, complete with fixings
Supply
• Base cover
• Climbing ladder with rigid anchor line (EN 353-1 Norm) inside the summit shrouding
• Vertical cable tray with cover (one for each upright)
• Paint finish of metallic structure in rust brown colour
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 3
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 4
triatower
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 5
triatower
TELESTYLE triatower
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
H1
antenna configuration
H
feeders inside legs joint
Vitroplex shrouding
climbing ladder
1.8 m
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 6
TELESTYLE mosaictower
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
mosaictower
Radio base stations, nowadays hugely interacting with urban landscape, can no longer be considered as a simple
technological element. They are becoming a contemporary symbol, connected and intertwining with material and
immaterial networks. An architecturally blended cell tower. mosaictower is the result of cooperation with the Italian
designer Roberto Pamio. A vertical architecture born from the most exclusive Italian handcraft tradition: a modern
obelisk for the modern needs of urban territories.
The triangular supporting structure consists of three externally covered steel section legs. The structure is stiffened
by steel bar tie rods. The steel structure is completely covered by glass panels. The external shrouding comprises
of shatterproof glass panels, each of which having Murano glass mosaic tile inserts, forming a true and proper
ocean blue and green mosaic.
The equipment room, placed at the base of the structure, houses the radio equipment and tower light power switch
box. The room is equipped with door openings on three sides to allow proper maintenance.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <0.5°
The standard supply provides the minimum configuration required for tower
commissioning, excluding radiant systems and mounts.
• Foundation set
• Supporting structure, divided into sections
• Mosaic shrouding
Supply
• Summit Vitroplex shrouding
• Base cover
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 7
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 8
mosaictower
TELESTYLE mosaictower
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
H1
H
antenna configuration
2.0 m
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 9
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
calzavara
calzavara - - tel.
tel. +39
TELESTYLE
+39 0432
0432 84381
84381 www.calzavara.it
www.calzavara.it info@calzavara.it
info@calzavara.it - - urban
urban furniture
furniture && concealment
concealment 2009
2009 - - page 10
mosaictower
TELESTYLE mosaictower
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
H1
H
antenna configuration
2.0 m
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 11
TELESTYLE heidi
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
H1
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 12
TELESTYLE lancepole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
lancepole
To minimize the environmental impact of antenna supporting structures, calzavara has created lancepole vertical
architecturally blended cell tower. The result combines technology and functionality with the present-day aesthetic
needs in both large and small urban areas.
The supporting structure consists of circular tapered, metal shaft sections, which are slip-jointed. No joints are
visible on the outer surface of the pole. The summit shrouding is made of light blue Vitroplex, a radio-electrically
transparent material that resembles frosted glass. The top shrouding is hot-formed and firmly fixed. Within the
Vitroplex cylinder it is possible to install up to 3 panel antennas in modules A and B and up to 2 Ø 60 cm dish
antennas in module C. Floodlights can be installed at the base of the summit cylinder.
To facilitate maintenance operations, the lancepole is also available with climbing ladder.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for pole commissioning,
excluding radiant systems and mounts.
• Foundation set
• Supporting structure, divided into shafts
• Summit cylinder, in Vitroplex (two B module + one C module)
Supply
• Climbing ladder with rigid anchor line (EN 353-1 Norm - only for version with ladder)
• Paint finish of metallic structure in rust brown colour
• Summit mast
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 13
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 14
lancepole
TELESTYLE lancepole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
MODULE A - for panel up to 2.7 m
3.0 m
MODULE B - for panel up to 2.2 m
antenna configuration
2.5 m
floodlights feeders exit
MODULE C - for dish antenna up to Ø60 cm
1.0 m
Ø1.6 m
Ø2.1 m
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 15
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
H1
H 5.0 m
to customer requirements.
two B modules + one C module.
Standard version foresees 6 m shrouding with
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 16
lancepole
TELESTYLE starpole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
starpole
To minimize the environmental impact of antenna supporting structures, calzavara has created starpole vertical
architecturally concealed structure. The result combines technology and functionality with the present-day aesthetic
needs in both large and small urban areas.
The supporting structure consists of circular tapered metal shaft sections, which are slip-jointed. No joints are
visible on the outer surface of the pole.
The summit shrouding (Tristar) is made of light blue Vitroplex, a radio-electrically transparent material that
resembles frosted glass. The top shrouding is hot-formed and firmly fixed on the metal structure. Up to 3 panel
antennas can be installed inside the unit at the summit of the pole. Up to 2 dish antennas can be installed at the
summit of the pole.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for pole commissioning,
excluding radiant systems and mounts.
• Foundation set
• Supporting structure, divided into shafts
• Vitroplex shrouding in the form of a star at the summit
Supply
• Paint finish of metallic structure in rust brown colour or RAL 9007 aluminium grey
• Summit mast
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 17
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 18
starpole
TELESTYLE starpole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
1.5 m
H1
H
antenna configuration
0.40 m
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 19
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 20
starpole
TELESTYLE flagstyle
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
flagstyle
flagstyle is an intelligent multitask infrastructure developed to manage the territory, at the same time blending into
the urban fabric. This innovative product is designed for multiple functions: territory monitoring (security cameras,
speed sensors/cameras for vehicles, etc.), environmental detecting (pollution measurement) and communication
display (advertising, weather forecasts, traffic information, etc.). All functions are remotely managed and
controlled as an independent network, with information displayed just in time or recorded and displayed as
required via message boards.
The supporting structure consists of tapered, metal shaft sections, which are slip-jointed. No joints are visible on
the outer surface of the pole. All electric wiring is located inside of the structure and suitably fastened to steel
cables. At the base of the structure are located service trapdoors. The variable message board is mounted in a
support frame that projects from the side of the pole, similar to a flag.
The summit shrouding (Tristar) is made of light blue Vitroplex, a radio-electrically transparent material that
resembles frosted glass. The Vitroplex shrouding is hot-formed and firmly fixed to the supporting frame. Up to 3
panel antennas can be installed inside the three-point star. An array of floodlights, in continuation with the
Vitroplex shape, can be installed immediately below the top.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for pole commissioning,
excluding radiant systems and mounts.
• Foundation set
• Supporting structure, divided into shafts
• Vitroplex shrouding in the form of a star at the summit (Tristar)
Supply
• Supporting frame for variable message board
• Paint finish of metallic structure in rust brown colour or RAL 9007 aluminium grey
• Summit mast
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 21
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 22
flagstyle
TELESTYLE flagstyle
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
1.5 m
ma
x2
.6
m
H1
LF max 1.3 m
1
supporting frame (type 1)
max dimensions of variable message board = 2.6 x 1.3 m
ma
x
3.
6
m
H
max 1.4 m
LF
2
supporting frame (type 2)
max dimensions of variable message board = 3.6 x 1.4 m
How to order
Specify the supporting frame type and length by adding one of the
following codes to the article:
• supporting frame type: 1 or 2
• supporting frame length: LF
4 (LF = 4.0 m) - 5 (LF = 5.0 m) - 6 (LF = 6.0 m) - 7(LF = 7.0 m)
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 23
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 24
flagstyle
TELESTYLE flagstyle
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
MESSAGE BOARD
calzavara variable message boards for broadcasting information in urban areas as well as in main traffic
thoroughfares are made of two types, both using LED technology: alphanumeric monochromatic or coloured
graphics.
The screens can reproduce written and graphical data sent from a remote center. They can be perfectly seen in
all night and day weather conditions; the type of characters or graphical information that can be reproduced
depends on the screen type.
The whole structure has been designed for external use, the message boards are protected against the atmospheric
agents and can be cleaned with water. These message boards are also characterized by low consumption levels,
as well as reduced maintenance.
The message boards are equipped with a management software installed on a personal computer included in the
supply. This software manages the information that has to be shown in an alphanumeric or in a graphical manner
and can be customized and designed according to specific requirements.
By means of a radio connection (cellular, WLAN, etc.) or a physical network, the software is able to acquire data
from a remote center in real time. These connections also allow remote management of the complete system as
well as a real time control and modification of the information to be displayed.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 25
TELESTYLE flagstyle
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
OPTIONAL SENSORS
• sensors for measuring environmental data -
temperature, humidity, barometric pressure and wind
speed - complete with management software (art.
FLSM meteo)
• sensor for measuring electromagnetic pollution,
complete with management software (art. FLES
esmog)
• sensors for measuring UV radiation, carbon
monoxide and dioxide, ozone, sulphur dioxide,
nitrogen oxide and dioxide - complete with
management software (art. FLIA atmo)
• sensor for measuring fine particles, complete with
management software (art. FLPS air)
• sensor for instant vehicle speed measurement,
complete with management software (art. FLVA speed)
• video surveillance system, complete with management
software (art. FLVS video)
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 26
TELESTYLE wingstyle
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
wingstyle
wingstyle, architecturally concealed site, is a design concept that combines technology and functionality - in this
case relating to public transport, with the present-day aesthetic and functional needs in small and large urban
areas.
The supporting structure consists of tapered, metal shafts, which are slip-jointed. No joints are visible on the outer
surface of the pole.
The wingstyle Tristar top is manufactured in light blue Vitroplex, a radio-electrically transparent material that
resembles frosted glass. The shrouding is hot-formed and firmly fixed to the pole. Up to 3 panel antennas can be
installed inside of the three-point star. Dish antennas can also be mounted on the summit mast.
The canopy materials match all the other parts of the structure, moving wingstyle from a traditional radio base
station to an attractive piece of urban furniture with an integrated covered waiting area. wingstyle is available in
two canopy shapes: symmetrical and asymmetrical, each of 5 or 6 metres in length.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for pole commissioning,
excluding radiant systems and mounts.
• Foundation set
• Supporting structure, divided into shafts
• Paint finish of metallic structure in rust brown colour or RAL 9007 aluminium grey
Supply
• Vitroplex shrouding in the form of a three-point star at the summit
• Stainless steel canopy with Vitroplex covering
• Summit mast
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 27
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 28
wingstyle
TELESTYLE wingstyle
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
1.5 m
m
3.65
H1
LC
1
symmetrical canopy
m
2.80
LC
H
2
asymmetrical canopy
How to order
Specify canopy type and length by adding one of the following
codes to the article:
• Canopy model: 1 (symmetric) or 2 (asymmetric)
• Canopy length: LC
5 (LC = 5.0 m) - 6 (LC = 6.0 m)
Example: W I N G 3 0 2 5 1 5 canopy
length
structure code canopy
H = 30 m type 1
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 29
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 30
wingstyle
TELESTYLE telestadium
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
telestadium
telestadium is designed to strike the right balance between technology, functional versatility and urban
architecture. This product is specifically manufactured for stadiums, arenas, coliseums where illumination
requirements adapt to telecommunication diffusion needs.
The triangle supporting structure tapers upwards. The sections are bolted together by internal flanges. No joints
are visible on the outer surface. The overall shape of the structure leans away from its vertical axis towards the
centre of the arena. A working platform is located at floodlight height for maintenance on both illumination and
radio.
The top mast, which slots into the platform, is a tapered, tubular steel structure. Up to 3 levels of antennas can be
fitted onto this mast; each level can take 3 panel antennas plus dish antennas. telestadium can accommodate
equipment for up to three different mobile phone operators at the same time.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <0.5°
The standard supply provides the minimum configuration required for pole commissioning,
excluding radiant systems and mounts.
• Foundation set
• Supporting structure, divided into shafts
• Paint finish of metallic structure
Supply
• Metal grating working platform
• Steel support frame for light units
• Antenna support mast
• Climbing ladder with rigid anchor line (EN 353-1 Norm)
• Vertical cable tray
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 31
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 32
telestadium
Article
STAD 3700
STAD 3100
TELESTYLE
H
m
37
31
Structure height
m
H1
10.0
10.0
Antenna mast height
tons
15.6
11.7
Gross
weight
m3
75
110
volume
Packing
m3
38
33
Foundation
concrete volume
m3
40
35
H1
Foundation
H
excavation volume
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 33
telestadium
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 34
telestadium
TELESTYLE citypole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
citypole
citypole is a design multipurpose structure that integrates public lighting with telecommunications antenna support.
This is an architectural element that can easily be inserted in urban areas and in 'sensitive' areas where it would
not usually be possible to erect a radio base station using traditional type structures.
The supporting structure consists of a cylindrical steel pole with a compact shrouding, which contains the antenna.
The connection between pole shafts is carried out using flange joints suitably coated with protection sump so that
the surface of the structure is evenly connected externally, with no directly visible bolts.
The feeders are fastened internally on special steel wires. There are two openings, suitably strengthened, at the
base of the pole (for cables and inspection). The external part can be equipped with a horizontal cable bridge at
the base.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for pole commissioning,
excluding radiant systems and mounts.
• Template and foundation bolts
• Supporting structure, divided into shafts
• Compact shroud on summit
Standard supply
• Antenna mounts for 3 panel antennas
• Paint finish of metallic structure e del compact shroud
• Summit mast
• Light fixture supports
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 35
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TELESTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 36
citypole
TELESTYLE citypole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
2.0 m
1.2 m
H1
H1
H
antenna mounts antenna mounts
CITY ..SH - SHROUDING CITY ..CO - COMPACT antennas
- only for flat panel antennas -
H
hyperlan, wifi,
wimax...
Ø 800 mm Ø 400 mm
How to order
Specify the type of shrouding and light fixture required by adding
the suffix codes to the article:
• Shrouding model: SH (shrouding) or CO (compact)
• Light fixture:
00 (pole without light fixture) - 01 (type 01)
02 (type 02) - 03 (type 03)
Example: C I T Y 1 2 S H 0 1
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 37
TELESTYLE citypole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
STANDARD COLOURS
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 38
TELESTYLE
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
triatower mosaictower heidi lancepole starpole flagstyle wingstyle telestadium
Accessories
For a description of the accessories and ordering information, please refer
to the Accessories catalogue.
• Antenna mounts
• Light fixtures
• Installation components
citypole SH citypole CO
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 39
TELESTYLE
ANTENNA MOUNTS
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
triatower
mosaictower
heidi
lancepole starpole
Three panel
antenna mounts
included in
standard supply
telestadium
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 40
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line
bbstruct
teleshroud
multipole
totemtower
* T h e p r o d u c t s a r e p r o t e c t e d u n d e r I . P. R i g h t s
R AW M A S K
Raw land concealing & restyling
*
RAWMASK totemtower
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
totemtower
This product is based on a design similar to that of a traditional antenna tower but, because it can be fitted with
countless types of external cladding, totemtower can become an advertising sign, a medieval tower or other types
of architectural structures.
The structure consists of a square or triangular section tower designed to be entirely clad with panels made of a
radio-electrically transparent material. Inside the structure is installed a climbing ladder which is accessible from
the base of the tower through a manhole door. These structures are available in heights from 24 to 42 m and can
be supplied with any type of images and external colouring, either uniform or shaded.
Alternatively, customers may send images they intend to reproduce, on high resolution digital photo media.
calzavara will send one or more graphic simulations of the outer cladding.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <0.5°
The standard supply provides the minimum configuration required for tower
commissioning, excluding radiant systems and mounts.
• Tower complete with shrouding
• Template and anchor bolts
• Vertical cable tray
Standard supply
• Climbing ladder with rigid anchor line (EN 353-1 Norm)
• Packing list with installation and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 42
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
RAWMASK
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 43
totemtower
RAWMASK totemtower
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
H1
H1
H
H
antenna mounts
TOTT ....
triangular section
2.0 m
TOTS ....
square section
2.0 m
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 44
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
RAWMASK totemtower
calzavara
calzavara - - tel.
tel. +39
+39 0432
0432 84381
84381 fax
fax +39
+39 0432
0432 848997
848997 www.calzavara.it
www.calzavara.it calzavara@calzavara.it
calzavara@calzavara.it - - Catalogue
Catalogue 2004
2004 - -
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 45
page
page 51
51
RAWMASK teleshroud
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
teleshroud
teleshroud is an economical solution to combine technology and design. teleshroud is also very versatile: it can
easily be transformed from a simple architectural structure to an advertising sign and/or illumination pole. The
supporting structure consists of tapered, cold pressed sheet metal shaft sections, which are partially slip-jointed
and then clamped together by means of hydraulic jacks.
The summit shroud conceals panel and dish antennas, plus light fixtures. It consists of circular or square section
modules made of radio-electrically transparent material. The shrouding is fixed to the metallic supporting structure
in a way that takes into account the different heat expansion coefficients of materials in contact, so as to ensure
secure, vibration-free attachment. Access to the summit interior for antenna installation and maintenance is by
means of the climbing ladder and by doors placed on the shrouding modules. teleshroud can be fitted with
advertising signs and/or logos and a virtually unlimited choice of colours is available to meet any requirement. If
requested, illumination is provided by means of light fixtures, supported on a ring bracket.
As an option the summit shrouding can be supplied to restyle existing radio base stations, where the antenna
supporting structure is a pole. The shrouding can be combined with existing calzavara poles or similar existing
structures, replacing the antenna supporting masts.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for pole commissioning,
excluding radiant systems and mounts.
• Template and anchor bolts
• Supporting structure, divided into shafts
• Shrouding in radio-electrically transparent material, grey/white colour (RAL 7037 or
Standard supply
7038)
• Vertical cable tray
• Climbing ladder with rigid anchor line (EN 353-1 Norm)
• Packing list with installation and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 46
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
RAWMASK
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 47
teleshroud
RAWMASK teleshroud
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
H1
H1
antenna mounts
H
H
Ø = 1.6 or 1.2 m
1.2 m
How to order
Please specify the section type (circular or square) and dimension
by adding one of the following codes to the article:
• S12 = 1.2 m (square)
• C12 = 1.2 m (circular)
• C16 = 1.6 m (circular)
Example: S H R D 2 7 0 6 S 1 2 dimension
1.2 m
structure code square
H = 27 m section
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 48
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
RAWMASK
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 49
teleshroud
RAWMASK multipole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
multipole
With multipole, calzavara present a multifunction product, performing the functions not only of traditional antenna
support structures, but also of lighting pole and billboard. The base shaft is connected to the foundation bolts by
means of a flange. The versatility of multipole, combined with a careful design focused on cost optimization,
allows it to blend almost naturally with the architectural surroundings.
The supporting structure is composed of polygonal tapered cone shafts. The camouflage at the top consists of three
semi-circular frames to support radomes manufactured with radio-electrically transparent material. The radomes,
that can be supplied with different colours, hide the antennas and the floodlight set. A working platform is
provided inside of the camouflaged summit structure, to allow maintenance of the radiant systems and floodlights.
Advertising signs or logos, can be reproduced on the radome surface.
The feeders, fixed to a vertical cable tray, run down the side the pole, up to the base.
The climbing ladders are anchored on the external wall of the pole and includes a fall prevention system with rigid
anchor line. To prevent access by unauthorized persons, the ladder can be supplied with a removable bottom
section, or with an anti-climb device.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for pole commissioning,
excluding radiant systems and mounts.
• Template and anchor bolts
• Supporting structure, divided into shafts
• Shrouding in radio-electrically transparent material, with triangular-shaped platform
Standard supply
• Fixed crown light support, positioned underneath resting platform
• Climbing ladder with rigid anchor line (EN 353-1 Norm)
• Vertical cable tray
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 50
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
RAWMASK
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 51
multipole
RAWMASK multipole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
H1
antenna mounts
3.8 m
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 52
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
RAWMASK
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 53
multipole
RAWMASK bbstruct
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
bbstruct
bbstruct is not only an advertising sign, but it can also become a multifunction structure by integrating the main
function with telecommunications antenna and/or public lighting support.
These structures are essentially 'custom' projects that are designed alongside the final user according to specific
requirements. calzavara collaborates with designers providing specific know-how for manufacturing multipurpose
structures with optimal functioning and a careful design.
The supporting structure consists of a steel pole with a coupling flange on the above-fitted advertising billboard
structure that can contain telecommunications antennas. The various trunks of the pole are joined together by 'slip
joint' type mounting coupling or flange joints suitably coated with protection sump so that the surface of the
structure is evenly connected externally, with no directly visible bolts.
The lighting power supply cables and any possible antennas are placed inside of the structure and fastened on
appropriate steel wires. There are two openings, suitably strengthened, at the base of the pole (for cables and
inspection).
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for pole commissioning,
excluding radiant systems and mounts.
• Template and foundation bolts
• Supporting structure, divided into shafts
• Billboard structure on summit
Standard supply
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 54
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
RAWMASK
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 55
bbstruct
RAWMASK
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
totemtower teleshroud multipole bbstruct
Accessories
For a description of the accessories and ordering information, please refer to the Accessories catalogue.
• Antenna mounts
• Floodlights
• Installation components
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 56
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
RAWMASK
TAPB ....
TAPB ....
TAPB ....
ANTENNA MOUNTS
TAPP ....
TAPP ....
TAPP ....
multipole
teleshroud
totemtower
TADA ....
TADA ....
TADA ....
TAMA ....
TAMA ....
TAMA ....
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 57
C AT *
C o n c e a l i n g A r t i f i c i a l Tr e e s
* T h e p r o d u c t s a r e p r o t e c t e d u n d e r I . P. R i g h t s
austrian
pine
maritime
pine
date palm
fan palm
cypress
C AT austrian pine (Pinus nigra)
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
austrian
pine
The increasing need to conceal radio base stations has lead to the creation of antenna concealing solutions, that
can easily be introduced into environments that require a low-impact visual outcome. A 'field experience' of over
ten years and worldwide patents, is calzavara's credentials with regards quality and durability of these
'concealing antennas', even in extreme climates.
The trunk consists of a steel pole divided into several shafts, according to the overall height of the structure that
can vary from 15 to 40 meters. The external surface of the trunk is coated by plastic material that is resistant to
UVA rays and atmospheric agents, with an aspect that in time maintains the resemblance of natural bark.
The foliage is comprised of branches made of plastic material accurately designed, taking into consideration
quantity, shape and array suitable to completely conceal the antennas and all accessory parts in a natural manner.
The materials used, in addition to guaranteeing radio-electric transparency and resistance to UVA rays, over the
time keep their proper mechanical and colour characteristics. To facilitate maintenance operations, the austrian
pine is also available with internal climbing ladder and also in a multi-operator version (site sharing).
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for commissioning the
austrian pine, excluding radiant systems and mounts.
• Foundation set
• Polygonal pole, subdivided into shafts covered with artificial bark
• Top antenna pipe mounts
Supply
• Foliage
• Internal climbing ladder with anchor line (EN 353-1/2 Norm - only for version with
ladder)
• Packing list, erection and maintenance instructions
• Packing in bundles and/or wooden cases and crates
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 59
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C AT
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 60
austrian pine (Pinus nigra)
C AT austrian pine (Pinus nigra)
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
without ladder with ladder
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 61
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C AT
H1
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 62
austrian pine (Pinus nigra)
C AT maritime pine (Pinus pinaster)
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
maritime
pine
The increasing need to conceal radio base stations has lead to the creation of antenna concealing solutions, that
can easily be introduced into environments that require a low-impact visual outcome. A 'field experience' of over
ten years and worldwide patents, is calzavara's credentials with regards quality and durability of these
'concealing antennas', even in extreme climates.
The trunk consists of a steel pole divided into several shafts, according to the overall height of the structure that
can vary from 15 to 35 meters. The external surface of the trunk is coated by plastic material that is resistant to
UVA rays and atmospheric agents, with an aspect that in time maintains the resemblance of natural bark.
The foliage is comprised of branches made of plastic material accurately designed, taking into consideration
quantity, shape and array sui table to completely conceal the antennas and all accessory parts in a natural manner.
The materials used, in addition to guaranteeing radio-electric transparency and resistance to UVA rays, over the
time keep their proper mechanical and colour characteristics.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for commissioning of
maritime pine, excluding radiant systems and mounts.
• Foundation set
• Polygonal pole, subdivided into shafts covered with artificial bark
• Foliage
Supply
• Packing list, erection and maintenance instructions
• Packing in bundles and/or wooden cases and crates
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 63
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C AT
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 64
maritime pine (Pinus pinaster)
C AT maritime pine (Pinus pinaster)
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
0.5 m
H1
H
antenna mounts
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 72
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 65
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C AT
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 66
maritime pine (Pinus pinaster)
C AT date palm (Phoenix dactylifera)
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
date
palm
The increasing need to conceal radio base stations has lead to the creation of antenna concealing solutions, that
can easily be introduced into environments that require a low-impact visual outcome. A 'field experience' of over
ten years as regards plastic and metallic products is calzavara's credentials as to quality and durability of these
'concealing antennas', even in extreme climates.
The trunk consists of a steel pole divided into several shafts, according to the overall height of the structure that
can vary from 15 to 40 meters. The external surface of the trunk is coated by plastic material that is resistant to
UVA rays and atmospheric agents, with an aspect that in time maintains the resemblance of natural bark.
The foliage is comprised of leaves made of plastic material accurately designed, taking into consideration
quantity, shape and array suitable to completely conceal the antennas and all accessory parts in a natural manner.
The materials used, in addition to guaranteeing radio-electric transparency and resistance to UVA rays, over the
time keep their proper mechanical and colour characteristics. In order to render the aspect of this palm more
natural there are available artificial fruits formed by bunches of dates. To facilitate maintenance operations, the
date palm is also available with internal climbing ladder and also in a multi-operator version (site sharing).
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for commissioning of
date palm, excluding radiant systems and mounts.
• Foundation set
• Polygonal pole, subdivided into shafts covered with artificial bark
• Top antenna pipe mounts
Supply • Foliage
• Internal climbing ladder with anchor line (EN 353-1/2 Norm - only for version with
ladder)
• Packing list, erection and maintenance instructions
• Packing in bundles and/or wooden cases and crates
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 67
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C AT
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 68
date palm (Phoenix dactylifera)
CAT date palm (Phoenix dactylifera)
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
without ladder with ladder
How to order
Specify bark type by adding the suffix codes to the article:
• M (Mediterranean bark) or A (Arabic bark)
M - Mediterranean bark A - Arabic bark
Example: F P N L 2 0 0 0 A
date palm H = 20 m
without ladder Arabic bark
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 69
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
H1
CAT
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 70
date palm (Phoenix dactylifera)
CAT fan palm (Chamaerops humilis)
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
fan
palm
The increasing need to conceal radio base stations has lead to the creation of antenna concealing solutions, that
can easily be introduced into environments that require a low-impact visual outcome. A 'field experience' of over
ten years as regards plastic and metallic products is calzavara's credentials as to quality and durability of these
'concealing antennas', even in extreme climates.
The fan palm has dimensions varying from 4 to 15 meters in height. It is particularly suitable for roof top radio
base stations in urban areas such as traditional or hanging gardens, terraces, flat roofs, etc.
The trunk is formed by a cylindrical steel pole, divided into several shafts, according to the overall height of the
structure. The external surface of the trunk is coated by plastic material that is resistant to UVA rays and
atmospheric agents, with an aspect that in time maintains the resemblance of natural bark.
The foliage is comprised of leaves made of plastic material accurately designed, taking into consideration
quantity, shape and array suitable to completely conceal the antennas and all accessory parts in a natural manner.
The materials used, in addition to guaranteeing radio-electric transparency and resistance to UVA rays, over the
time keep their proper mechanical and colour characteristics.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for commissioning of fan
palm, excluding radiant systems and mounts.
• Foundation set
• Pole, subdivided into shafts covered with artificial bark
• Top antenna pipe mounts
Supply
• Foliage
• Packing list, erection and maintenance instructions
• Packing in bundles and/or wooden cases and crates
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 71
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
CAT
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 72
fan palm (Chamaerops humilis)
CAT fan palm (Chamaerops humilis)
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
H1
H
antenna pipe mount
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 73
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
CAT
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 74
fan palm (Chamaerops humilis)
CAT cypress (Cupressus)
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
cypress
The increasing need to conceal radio base stations has lead to the creation of antenna concealing solutions, that
can be easily introduced into environments that require a low-impact visual outcome. A 'field experience' of over
ten years as regards plastic and metallic products is calzavara's credentials as to quality and durability of these
'concealing antennas', even in extreme climates. To satisfy customer needs for different climatic and natural
environments there is also available this cypress antenna.
The trunk is formed by a steel pole, divided into several shafts, according to the overall height of the structure that
can vary from 15 to 35 meters. The external surface of the trunk is coated by plastic material that is resistant to
UVA rays and atmospheric agents, with an aspect that in time maintains the resemblance of natural bark.
The foliage is comprised of leaves made of plastic material accurately designed taking into consideration quantity,
shape and array suitable to completely conceal the antennas and all accessory parts in a natural manner. The
materials used, in addition to guaranteeing radio-electric transparency and resistance to UVA rays, over the time
keep their proper mechanical and colour characteristics.
To facilitate maintenance operations, the cypress is equipped with an internal climbing ladder and there is also
available a multi-operator version (site sharing).
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
Provides the minimum configuration required for commissioning of the cypress, excluding
radiant systems and mounts.
• Foundation set
• Pole, subdivided into shafts covered with artificial bark
• Top antenna pipe mounts
Supply
• Vertical cable tray
• Foliage
• Artificial bark at the base
• Internal climbing ladder with rigid anchor line (EN 353-1 Norm)
• Packing list, erection and maintenance instructions
• Packing in bundles and/or wooden cases and crates
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 75
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
CAT
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 76
cypress (Cupressus)
CAT cypress (Cupressus)
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
2.0 m
H1
H
antenna pipe mount
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 77
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
CAT
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 78
cypress (Cupressus)
R O O F S T Y L E*
Roof top urban furniture
* T h e p r o d u c t s a r e p r o t e c t e d u n d e r I . P. R i g h t s
cagetop
triatop
shamrock
chimroof
roofmask
ROOFSTYLE cagetop
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
cagetop
roofstyle is the outcome of the collaboration with designers specialized in vertical architecture. This structure
represents an innovative solution to the problem of environmental impact of antenna supporting structures.
roofstyle totally changes the logic of concealment. In fact, the technological infrastructure, instead of being
unnoticed, acquires greater visibility, transforming it into a true and proper piece of urban furniture.
cagetop is a structure comprising of a summit section with Vitroplex shrouding and a set of underlying modules
made of small diameter steel pipes arranged in a circumference.
The intermediary modules are characterized by a variable 'transparency' depending from which point it is
observed and by the capability of making the technological content slightly visible without completely defining the
shape.
The choice of different types of transparency between the various parts of the rooftop gives the object a dynamic
appearance, yet keeping a well-defined shape.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <0.5°
Provides the minimum configuration required for commissioning of the cagetop, excluding
radiant systems and mounts.
• Supporting structure, divided into sections
• Vitroplex shrouding
• Antenna mounts for 3 panel antennas
Supply
• Climbing ladder with rigid anchor line (EN 353-1 Norm)
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 80
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
Article
CAGE 1025
CAGE 0825
CAGE 0725
H1
ROOFSTYLE
Ø 900 mm
H
m
8.5
7.0
10.0
H
Structure height
m
H1
2.5
2.5
2.5
Height of antenna mast
1.6
1.3
1.0
tons
Gross
weight
8
7
6
m3
volume
Packing
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 81
cagetop
ROOFSTYLE triatop
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
triatop
roofstyle is the outcome of the collaboration with designers specialized in vertical architecture. This structure
represents an innovative solution to the problem of environmental impact of antenna supporting structures.
roofstyle totally distorts the logic of concealment. In fact, the technological infrastructure, instead of being
unnoticed, acquires greater visibility, transforming it into a true and proper piece of urban furniture.
The triatop triangular supporting structure consists of three legs joined together by hidden flanges. The shrouding
is made of light blue Vitroplex, a radio-electrically transparent material that resembles frosted glass. Corner
components, in hot-formed sheet, follow the rounded triangular shape of the structure.
The antennas are fixed by a Ø 114 mm mount, fitted inside the Vitroplex shrouding, which is divided into two or
three or four modules. Depending on the height, it is possible to install up to 3 panel antennas and up to 2 dish
antennas (max. diameter 60 cm), for each module. The installation of several modules makes triatop, suitable for
multi-operator use.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <0.5°
Provides the minimum configuration required for commissioning of the triatop, excluding
radiant systems and mounts.
• Supporting structure, divided into sections
• Vitroplex shrouding
• Climbing ladder with rigid anchor line (EN 353-1 Norm)
Supply
• Vertical cable tray
• Paint finish of base metallic structure - rust brown colour
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 82
ROOFSTYLE triatop
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
H1
1.8 m
calzavara - tel.
tel.+39
+390432
0432 84381
84381 fax www.calzavara.it
+39 0432 848997 info@calzavara.it - urban furniture & concealment
www.calzavara.it calzavara@calzavara.it 2009- page
- Catalogue 2009 - page93
83
ROOFSTYLE shamrock
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
shamrock
roofstyle is the outcome of the collaboration with designers specialized in vertical architecture. This structure
represents an innovative solution to the problem of environmental impact of antenna supporting structures.
roofstyle totally distorts the logic of concealment. In fact, the technological infrastructure, instead of being
unnoticed, acquires greater visibility, transforming it into a true and proper piece of urban furniture.
The shamrock supporting structure consists of a cylindrical pole with a constant section.
The summit is made of light blue Vitroplex, a radio-electrically transparent material that resembles frosted glass.
The top shrouding is hot-formed and firmly fixed on the metal structure. Up to 3 panel antennas can be installed
inside the unit at the summit of the pole. Up to 2 dish antennas can be installed at the summit of the pole.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 84
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
Article
SHAM 1025
SHAM 0825
SHAM 0625
H1
ROOFSTYLE
H
m
8.0
6.0
10.0
Structure height
H
m
H1
2.5
2.5
2.5
Height of antenna mast
tons
1.10
0.90
0.75
Gross
weight
9
m3
11
10
volume
Packing
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 85
shamrock
ROOFSTYLE chimroof
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
chimroof
Reducing environmental impact, for radio base stations in urban areas, has been tackled using the vast design
experiences gained and by the thorough knowledge of materials for concealing structures.
Today, calzavara, offers to the market a wide range of low environmental impact products, such as artificial
chimneys, structures having variable heights from 6 to 12 meters, used to conceal one or more mobile operators
on the same station.
The structural part is formed by a steel pole divided into shafts, according to the total height of the structure. Each
shaft has a maximum height of 3 meters and a weight of not greater than 100 kg to facilitate installation on
building roofs. The square base frame, is fixed to the roof by chemical or expansion bolts to guarantee, in addition
to the correct installation, an adequate load distribution over the roof surface. The frame dimensions vary
according to that of the chimney and place of installation. The locking system allows to gain access inside of the
chimney at various heights facilitating maintenance operations. The shrouding panels are of radio-electrically
transparent material .
The standard chimney terminal is flat-shaped, but can also be supplied in different shapes, colour and size upon
request. Colouring and surface, in the various standard versions is grey with a smooth surface. However, it is
possible to supply innumerable colours, with external textures similar to bricks, natural stone, etc.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
Provides the minimum configuration required for commissioning of the chimroof, excluding
radiant systems and mounts.
• Fixing plate including the roof installation kit (expansion or chemical anchor bolts)
• Galvanized supporting pole in one or more shafts
• Vertical cable tray
Supply
• Climbing ladder with rigid anchor line (EN 353-1 Norm)
• Shrouding panels in radio-electrically transparent material
• Camouflage cap
• Packing list, erection and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 86
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
ROOFSTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 87
chimroof
Article
CHSQ 0903
CHSQ 0903
CHSQ 0603
ROOFSTYLE
1.000 mm
H
m
9.0
6.0
12.0
chimney internal details
Structure height
H
H1
m
H1
3.0
3.0
3.0
Height of antenna mast
1.2
1.0
0.7
tons
Gross
weight
m3
4.0
3.5
3.0
volume
Packing
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 88
chimroof
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
ROOFSTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 89
chimroof
ROOFSTYLE roofmask
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
roofmask
The consistent number of roof tops that crowd our cities often, from an environmental impact point of view, do not
respect the areas in which they have been installed.
calzavara has the answer to this problem with a wide range of solutions aimed to reduce the landscape impact
of rooftop structures placed in urban areas. They are modular panelling systems that can be easily fixed to existing
rooftop structures, giving them total restyling in reduced times and with contained costs. The materials used range
from special cloth sheets, to fiberglass, to plastic and microperforated materials, with an infinite range of colours
and reproducible images on the external surfaces.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 28 m/s (q10=1.20 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.20 kN/m2)
Design
Provides the minimum configuration required for commissioning of the roofmask, excluding
radiant systems and mounts.
• Fixing hardware (expansion or chemical anchor bolts)
• Galvanized supporting steel frame
• Plastic camouflage wall panels
Supply
• Packing list, erection and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 90
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
ROOFSTYLE
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - urban furniture & concealment 2009 - page 91
roofmask
POLES
polypole
fpole
gpole
POLES polypole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
polypole
The self-supporting polygonal poles are largely used in radio base stations for mobile radio telecommunications
and in radio centres. The advantages of these solutions are the reduced environmental impact, modularity of
accessory components, shorter installation times and costs compared to traditional lattice structures.
The supporting structure is composed of a number of individual cone-shaped shafts, with the base trunk connected
to the template by a flange. The remaining lengths are mounted onto each other by means of a hydraulic jack
system, ensuring the correct clamping pressure. The pole is anchored at the base by steel foundation anchor bolts
cast in the reinforced concrete foundations and positioned by a template.
The climbing ladder is supplied complete with anchor line (EN 353-1/2 Norm) and tiltable footrests. The
traditional caged version with intermediary resting platforms, can be supplied upon request on certain types of
poles. Access by unauthorized personnel is prevented by a special anti-climbing device.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 27 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
The standard supply provides the minimum configuration required for pole commissioning,
excluding radiant systems and mounts.
• Foundation set
• Supporting structure, divided into shafts
• Climbing ladder with anchor line (EN 353-1/2 Norm)
Supply
• Vertical cable tray
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 93
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
POLES
polypole
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 94
POLES
Pole
with dome
Pole
with platform
Pole
H
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 95
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
POLES polypole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
How to order
Specify the safety climbing system required by adding the suffix codes to Example: P P P W 1 8 RL
the article:
• RL (rigid anchor line EN 353-1) • FL (flexible anchor line EN 353-2) medium polygonal pole rigid anchor line
H = 18 m
For more information on anchor line, refer to the Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 96
POLES fpole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
fpole
The flanged self-supporting poles are largely used for radio base stations for mobile radio telecommunications and
in radio centers. The advantages of this solution are the reduced environmental impact, modularity of accessory
components, shorter installation times and costs compared to traditional lattice structures.
The supporting structure is composed of a number of cylindrical shafts of different diameters and thicknesses, that
are connected together by means of bolted joints. The pole is anchored at the base by steel foundation anchor
bolts cast in the reinforced concrete foundations and positioned by a template.
The climbing ladder is supplied complete with anchor line (EN 353-1/2 Norm) and tiltable footrests. The
traditional caged version with intermediary resting platforms, can be supplied upon request on certain types of
poles. Access by unauthorized personnel is prevented by a special anti-climbing device.
The various types of flanged poles offered by calzavara are able to satisfy the most varied needs in conformity to
the antenna loads requested.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 27 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
The standard supply provides the minimum configuration required for pole commissioning,
excluding radiant systems and mounts.
• Foundation set
• Supporting structure, divided into shafts
• Climbing ladder with anchor line (EN 353-1/2 Norm)
Supply
• Vertical cable tray
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 97
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
POLES
fpole
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 98
POLES fpole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
H
How to order
Specify the safety climbing system required by adding the suffix codes to Example: P F L H 1 8 RL
the article:
• RL (rigid anchor line EN 353-1) • FL (flexible anchor line EN 353-2) light flanged pole rigid anchor line
H = 18 m
For more information on anchor line, refer to the Accessories catalogue.
Structure height Max antenna Twist & Gross Packing Foundation Foundation
Article H surface at the top Sway* weight volume excavation volume concrete volume
m m2 degree tons m3 m3 m3
light
PFLH12 .. 12 4.0 <0.5 1.6 7 10 6
PFLH18 .. 18 4.0 <0.5 2.7 13 15 8
PFLH24 .. 24 4.0 <0.5 4.4 21 20 11
PFLH30 .. 30 4.0 <0.5 6.9 33 28 15
PFLH36 .. 36 4.0 <0.5 9.9 45 36 19
heavy
PFPH18 .. 18 10.0 <0.5 2.1 10 15 8
PFPH24 .. 24 10.0 <0.5 3.8 18 21 11
PFPH30 .. 30 10.0 <0.5 6.2 30 31 15
PFPH36 .. 36 10.0 <0.5 9.0 43 39 20
PFPH42 .. 42 10.0 <0.5 12.9 59 48 24
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 99
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
POLES
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 100
POLES gpole
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
gpole
The guyed flanged poles are largely used for radio base stations for mobile radio telecommunications and in radio
centers. The advantages of this solution are the reduced environmental impact, modularity of accessory
components, shorter installation times and costs.
The supporting structure is composed of a number of cylindrical shafts of different diameters and thicknesses, that
are connected together by means of bolted joints and stiffened by one or more steel guys.
The pole is anchored at the base by steel foundation anchor bolts cast in the reinforced concrete foundations and
positioned by a template.
The climbing ladder is supplied complete with anchor line (EN 353-1/2 Norm) and tiltable footrests. Access by
unauthorized personnel is prevented by a special anti-climb device.
The various types guyed poles offered by calzavara are able to satisfy the most varied needs in conformity to the
antenna loads requested.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 27 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for pole commissioning,
excluding radiant systems and mounts.
• Foundation set
• Supporting structure, divided into shafts
• Guys with tensioners
Supply
• Climbing ladder with anchor line (EN 353-1/2 Norm)
• Vertical cable tray
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 101
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
POLES
gpole
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 103
POLES
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
polypole fpole gpole
Accessories
For a description of the accessories and ordering information, please refer to the Accessories catalogue.
• Antenna mounts
• Feeder clamps
• Floodlights
• Installation components
• Waterproof entries
• Windbraces
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 103
POLES
ANTENNA MOUNTS
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TAPB .... TAPC .... TAPP .... TADA .... TAMA ....
PMFP UBPI .6.. SA/TA UBPI 60.. SE/TE UBPI .7.. SA/TA
UBPI 76.. SE/TE UBPI .1.. SA/TA UBPI 11.. SE/TE TAAR ....
gpole
TAPB .... TAPC .... TAPP .... TADA .... TAMA ....
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 104
TOWERS
teletower
gtower
TOWERS teletowers
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
teletowers
Self-supporting towers are used for radio base stations, radio and broadcasting plants. The various types of
structures and different types of technical solutions offered derive from an experience of over 40 years that can
greatly satisfy all types of technical and environmental requirements.
calzavara is able to design, produce and commission any type of structure, from 10 to 150 meters in height, and
over.
The supporting structure normally has a square section made of open (L or C-shaped) steel profiles, or triangular
with cylindrical legs. The base segment is connected to the foundation anchor bolts cast into the foundations. The
various segments formed by the legs and section breakers are composed of bolted joints or single segments
partially or wholly welded.
The climbing ladder can be supplied with different types of fall protection systems:
• with rigid anchor line (EN 353-1 Norm) and tiltable footrests
• with flexible anchor line (EN 353-2 Norm) and tiltable footrests
• with traditional caged version and intermediary resting platforms
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 27 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
The standard supply provides the minimum configuration required for tower
commissioning, excluding radiant systems and mounts.
• Foundation set
• Supporting structure, divided into sections
• Climbing ladder with fall protection system (anchor line EN 353-1/2 Norm or caged)
Supply
• Vertical cable tray
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 106
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TOWERS
teletowers
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 107
TOWERS teletowers
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
T
H1
H
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 108
TOWERS teletowers
Structure Top straight Base Top Max. Foundation Foundation
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 109
TOWERS gtower
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
gtower
These are lattice structures with triangular sections legs made of hollow pipes as well as beams and braces made
of steel rods. The structures are equipped with a set of steel guys anchored to the ground in more places.
calzavara guyed towers are available in different versions according to the loading requirements and can be
assembled with heights going up to 82 m. The steel profiles are made of hot-dip galvanized steel. The towers are
in modules having a contained weight, that can be lifted and assembled in sequence using a lifting derrick fixed
directly to the tower. The base module is equipped with a spherical hinge that rests on a base plate in contact
with the foundation.
The guys are fixed to the foundation’s blocks thanks to plates and guy tensioners, in the lightest versions the guys
can be fixed to the ground through ground anchors driven into the ground at different depths according to the
different soil types.
On the top is assembled a pole for the support of a lightning rod and at the base is foreseen suitable grounding
protection systems.
Upon request the towers can be supplied with an anti-falling protection system provided with a flexible anchor line
(EN 353-2 Norm) allowing climbing of the structure on one side for maintenance operations; the structure can also
be equipped with an Aircraft Warning Light Systems with a constant red light powered by PV panels.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 27 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (operational wind speed) <1°
The standard supply provides the minimum configuration required for tower
commissioning, excluding radiant systems and mounts.
• Foundation set
• Supporting structure, divided into sections
• Guys complete with tensioners
Supply
• Vertical cable tray
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 110
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TOWERS
gtower
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 111
TOWERS
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
art. TAEL art. TALT art. TAML art. TAMM art. TAXL art. TAXP
ANTENNA MOUNTS
teletowers
AMPM .... / AMXM .... TAAR .... TAMA .... / TAXA .... AMCP .... / AMXP .... AMPS .... / AMPX ....
AMCT .... / AMXT .... AMZA .... TAMA .... IN / TAXA .... IN AMTS .... / AMTX .... AMPM .... IN / AMXM ....IN
Accessories
For a description of the accessories and ordering information, please refer to the Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 112
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TOWERS
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 113
FRAMETOP
rooftop
FRAMETOP rooftop
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
rooftop
The solutions offered by calzavara for urban sites take into consideration the detailed 'on field' experience gained,
capable of satisfying the different project requirements. All structural parts can either be of hot-dip galvanized
steel or aluminium alloy. The antenna supporting structure is made of either tubular or open metallic sections.
rooftop is available in different configurations:
• Antenna poles: galvanized steel tubular pole available in 3 versions (light, medium and heavy) with heights
from 1 to 15 meters. The poles are designed to withstand a horizontal load equivalent to 3 panel antennas and
2 dish antennas (Ø 600 mm). This pole is supplied with various anchoring structures (single fixing, double fixing,
windbrace fixing). It can be installed on terrace walls or on existing stair wells.
• Tripod: The structure, in hot-dip galvanized steel, can be fixed directly to the roof by means of chemical
anchoring systems or bolted to a self-ballasting frame without the need of anchoring it to the roof with fixings or
bolts. These tripods for rooftop mounting are designed to withstand an horizontal load equivalent to 3 panel
antennas and 2 dish antennas (Ø 600 mm) and are available in different heights varying from 3 to 6 meters.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 27 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
The standard supply provides the minimum configuration required for the rooftop
commissioning, excluding radiant systems and mounts.
• Supporting structure complete with stiffening and fixing plate
• Climbing ladder with rigid anchor line (EN 353-1 Norm)
• Vertical cable tray
Supply
• Anchoring systems for securing to existing structures
• Assembly hardware
• Packing list with assembly and maintenance instructions
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 115
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
FRAMETOP
rooftop
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 116
FRAMETOP rooftop
ANTENNA POLES small
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
Ø
Ø
How to order
Please specify the type of fixing system required by adding one of the following codes to the article:
ME (mechanical anchoring) - CH (chemical anchoring) D
Example: A S L D 2 0 6 2 M E
Structure height Pipe mount Intermediate wall fixings Max. antenna Twist & Gross Packing
Article H Ø D load sway* weight volume
m mm mm m2 degree kg m3
single fixing
ASLS 1062 .. 1.0 60 200 2 <0.5 15 0.1
ASLS 1072 .. 1.0 76 200 2 <0.5 20 0.1
ASLS 1012 .. 1.0 114 250 2 <0.5 25 0.1
ASLS 1014 .. 1.0 114 400 2 <0.5 25 0.1
double fixing
ASLD 1562 .. 1.5 60 200 2 <0.5 25 0.1
ASLD 2062 .. 2.0 60 200 2 <0.5 30 0.1
ASLD 2562 .. 2.5 60 200 2 <0.5 30 0.1
ASLD 3062 .. 3.0 60 200 2 <0.5 35 0.1
ASLD 1572 .. 1.5 76 200 2 <0.5 30 0.1
ASLD 2072 .. 2.0 76 200 2 <0.5 35 0.1
ASLD 2572 .. 2.5 76 200 2 <0.5 35 0.1
ASLD 3072 .. 3.0 76 200 2 <0.5 40 0.1
ASLD 1512 .. 1.5 114 250 2 <0.5 40 0.1
ASLD 2012 .. 2.0 114 250 2 <0.5 45 0.1
ASLD 2512 .. 2.5 114 250 2 <0.5 50 0.1
ASLD 3012 .. 3.0 114 250 2 <0.5 60 0.1
ASLD 1514 .. 1.5 114 400 2 <0.5 45 0.1
ASLD 2014 .. 2.0 114 400 2 <0.5 50 0.1
ASLD 2514 .. 2.5 114 400 2 <0.5 55 0.1
ASLD 3014 .. 3.0 114 400 2 <0.5 60 0.1
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 117
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
FRAMETOP
ANTENNA POLES
small
rooftop
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 118
FRAMETOP rooftop
ANTENNA POLES medium
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
D
D
1.5 - 2.0 m
1.5 - 2.0 m
1.5 - 2.0 m
1.5
- 2.0
art. ASMS .... .. - single fixing art. ASMD .... .. - double fixing m
How to order
Please specify the type of fixing system required by adding one of the following codes to the article: art. ASMT .... .. - windbrace fixing
ME (mechanical anchoring) - CH (chemical anchoring) - WP (with threaded rod and backplate)
Example: A S M T 3 0 0 0 C H
Structure height Intermediate wall fixing Max. antenna Twist & Gross Packing
Article H D load sway* weight volume
m mm m2 degree kg m3
single fixing
ASMS 3050 .. 3.0 500 2.5 <1.0 210 0.5
ASMS 6050 .. 6.0 500 2.5 <1.0 380 1.0
ASMS 3080 .. 3.0 800 2.5 <1.0 230 0.5
ASMS 6080 .. 6.0 800 2.5 <1.0 410 1.0
double fixing
ASMD 3050 .. 3.0 500 2.5 <1.0 210 0.5
ASMD 6050 .. 6.0 500 2.5 <1.0 390 1.0
ASMD 3080 .. 3.0 800 2.5 <1.0 220 0.5
ASMD 6080 .. 6.0 800 2.5 <1.0 400 1.0
windbrace fixing
ASMT 3000 .. 3.0 - 2.5 <1.0 160 0.5
ASMT 6000 .. 6.0 - 2.5 <1.0 200 1.0
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 119
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
art. ASMS
single fixing
FRAMETOP
ANTENNA POLES
A
2000 ÷ 3000 mm
2000 ÷ 3000 mm
art. ASMD
double fixing
A
art. ASMT
2000 ÷ 3500 mm
windbrace fixing
2000 ÷ 3000 mm
medium
rooftop
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 120
2.5 - 3.5 m
single fixing
art. ASHS .... ..
FRAMETOP
ANTENNA POLES
D
2.5 - 3.5 m
double fixing
art. ASHD .... ..
D
2.5 - 3.5 m
2.0
- 4.0
m
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 121
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
FRAMETOP rooftop
ANTENNA POLES heavy
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
How to order
Please specify the type of fixing system required by adding one of the following codes to the article:
ME (mechanical anchoring) - CH (chemical anchoring) - WP (with threaded rod and backplate)
Example: A S H S 0 9 1 2 M E
Structure height Intermediate wall fixing Max. antenna Twist & Gross Packing
Article H D load sway* weight volume
m mm m2 degree kg m3
single fixing
ASHS 0680 .. 6.0 800 2.5 <1.0 450 1.5
ASHS 0980 .. 9.0 800 2.5 <1.0 710 2.0
ASHS 1280 .. 12.0 800 2.5 <1.0 980 2.5
ASHS 1580 .. 15.0 800 2.5 <1.5 1250 2.5
ASHS 0612 .. 6.0 1200 2.5 <1.0 470 3.0
ASHS 0912 .. 9.0 1200 2.5 <1.0 730 3.5
ASHS 1212 .. 12.0 1200 2.5 <1.0 1000 3.5
ASHS 1512 .. 15.0 1200 2.5 <1.5 1270 4.0
double fixing
ASHD 0680 .. 6.0 800 2.5 <1.0 510 2.5
ASHD 0980 .. 9.0 800 2.5 <1.0 770 3.0
ASHD 1280 .. 12.0 800 2.5 <1.0 1040 3.0
ASHD 1580 .. 15.0 800 2.5 <1.5 1310 3.5
ASHD 0612 .. 6.0 1200 2.5 <1.0 550 5.0
ASHD 0912 .. 9.0 1200 2.5 <1.0 810 5.5
ASHD 1212 .. 12.0 1200 2.5 <1.0 1080 6.0
ASHD 1512 .. 15.0 1200 2.5 <1.5 1350 6.0
windbrace fixing
ASHT 0600 .. 6.0 - 2.5 <1.0 430 1.0
ASHT 0900 .. 9.0 - 2.5 <1.0 700 1.5
ASHT 1200 .. 12.0 - 2.5 <1.0 970 1.5
ASHT 1500 .. 15.0 - 2.5 <1.5 1240 2.0
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 122
FRAMETOP rooftop
TRIPOD
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
art. ASTR .... BA
1.0 m
Pipe mount height Max. antenna Twist & Gross weight Ballast Packing
A B
Article H load sway* (excluding ballast) weight volume
m m m m2 degree kg kg m3
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 123
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
TRIPOD
FRAMETOP
rooftop
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 124
FRAMETOP rooftop
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
small medium heavy
ANTENNA MOUNTS
antenna poles
TAPB .... TAPC .... TAPP .... TAMA .... TADA ....
tripod
TAPB .... TAPC .... TAPP .... TAMA .... TADA ....
Accessories
For a description of the accessories and ordering information, please refer to the Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 125
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
FRAMETOP
rooftop
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 126
RADIOFLECT
passive
repeaters
RADIOFLECT passive repeaters
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
passive
repeaters
This range of calzavara products forms part of an interesting technical solution to supply and install microwave radio links,
in areas where line of sight between radio link terminals is annulled or drastically reduced by interposing obstacles
(mountains, buildings, trees, etc.). The repeaters are ‘passive’ because, due to their functioning, they don't require a source
of electrical energy.
The calzavara passive repeaters have been designed with the scope of guaranteeing advantages in terms of installation
and maintenance, such as:
• A wide range of models in conformity to each type of request
• Simplified installation thanks to the use of reflecting panels having a reduced weight and size
• Wide operative capability (band frequency from 2 to 23 GHz)
• Independent azimuth and zenith adjustments
• Greater orientation angles (to avoid alignment errors)
The reflecting surface is composed of panels with dimensions raging from 2 to 132 m2. The reflecting surface is extremely
flat, in order to guarantee perfect functioning with band frequencies of up to 23 GHz. Upon request can be supplied
surfaces suitable for even greater frequencies.
In over 40 years of presence on the market, over 600 radio links all over the world operate with calzavara passive
repeaters. The know-how acquired allows calzavara to support its customers in all phases of application of the passive
repeaters, starting from the free reliability analysis.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 27 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 110 km/h
Design
• Twist and sway at operational wind speed <6’
The standard supply provides the minimum configuration required for tower
commissioning, excluding radiant systems and mounts.
• Template and anchor bolts (only for Ground Mounted)
• Passive repeater
• Packing list with assembly and maintenance instructions
Supply
• Packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 128
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
RADIOFLECT
passive repeaters
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 129
RADIOFLECT passive repeaters
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
B
C
+
A
0°
C
_
ZENITH L R AZIMUTH
H
ADJUSTMENT 0° ADJUSTMENT
C
A
0°
ZENITH C
H
ADJUSTMENT
L R AZIMUTH
0° ADJUSTMENT
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 130
RADIOFLECT passive repeaters
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
+
A
0°
C
_
ZENITH
ADJUSTMENT
C
H
L R AZIMUTH
0° ADJUSTMENT
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 131
RADIOFLECT passive repeaters
art. AMPS .... 22 tower antenna mounts for TM series
Ø 114 mm
SUPPLY CONFIGURATION
H
INSTALLATION EXAMPLE
How to order
To order factory painting, add code ‘PRHP ....’ to the passive
repeater item code.
To order camouflage painting, add code ‘PRCA’ to the passive
repeater item code.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 132
RADIOFLECT passive repeaters
art. PRDI de-icing system
In harsh environmental conditions, thick deposits of ice on the
reflecting surface could weaken the radio signal. To overcome
this problem, calzavara supplies radomes made of special, high-
resistance and long-life fabric.
This item can also be installed on passive repeaters which are
already in operation. Standard colours are grey or brown.
How to order
To order the de-icing system, add the code ‘PRDI’ to the passive
repeater item code.
art. PRFA S - Magnetic fixing kit for sheet iron face panels
20 10
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & passive repeaters 2009 - page 133
Catal staz mobili_09:02_Alberi artificiali 21/07/09 17:07 Pagina 7
RDU
Rapid Deployment Unit
MFUC/MFCO
mobistation
KIST
kitstat
KICO
compact
kitstat
QKRL
quickrawland
calzavara
h e l p i n g w o r d s t o f l y
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:30 Pagina 8
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
mobistation
The mobile radio base stations with flanged pole are infrastructures transportable on truck, allowing fast and
easy installation in restricted spaces. Their use is strategic for the rapid expansion of cellular networks, putting
into service point to point radio connections, as well as supporting sudden increases of mobile traffic in case of
extraordinary events (trade fairs, sport events and concerts, emergencies, catastrophic events, etc.).
The mobile support structure is composed of a special trailer with telescopic stabilizers approved for road traffic.
Two versions are available: the extra compact model to house outdoor cabinets and the compact model, the latter
can be fitted out with a shelter.
The antenna supporting pole, with climbing ladder up to the summit, is fixed to the main base frame and is
composed of cylindrical flanged sections integrated by two or three sets of guys with a standard height of up to
30 m. The flanged pole mobile station, installable in eight hours, does not require civil works nor foundations,
and is complete of lateral ballast concrete weights and a working platform in checkered plate. This mobile unit
has been designed to be a temporary solution, but if requested, it can be easily transformed into a permanent
station, by means of an upgrade kit, without any disruption of the service.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 26 m/s (q10=1.1 kN/m2)
• Design wind speed (EIA 222) 150 km/h (q10=1.1 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (at operational wind speed) < 0.5°
The standard supply provides the minimum configuration required for mobistation
deploying and commissioning, excluding radiant systems and mounts.
• trailer approved for road use, with a overall carrying capacity of 2500 kg
• working platform in checkered plate with access ladder and parapets
• stabilizers with adjustable jacks
Supply
• antenna support pole consisting of steel tubes with a maximum length of 6 m each
• pole climbing ladder with rigid anchor line (EN 353-1)
• vertical fixing system for feeders and service cables
• galvanized steel guys with relative turnbuckles in ancillaries box
• ballast weights
• installation, use and maintenance manual
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 135
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:30 Pagina 9
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 136
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:30 Pagina 10
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
art. MFUC .... art. MFCO ....
ultra compact compact
5.0 m
antenna
support pole
climbing
ladder
H
steel guys
ballast
weights
L
telescopic
stabilizers
B B
access ladder
PLAN VIEW
Structure height Dimensions Max antenna Twist & Max pressure Gross weight Ballast Packing Shelter type
Article H B L load Sway* to ground (excluding ballast) weight volume (optional)
m m m m2 degree kg/cm2 tons tons m3 m3
ultra compact
MFUC 2471 24 7.1 7.1 3.5 <0.5 1.5 4.4 7.8 23 /
MFUC 2771 27 7.1 7.1 3.5 <0.5 1.5 4.6 7.8 24 /
MFUC 3071 30 7.1 7.1 3.5 <0.5 1.5 4.8 7.8 25 /
compact
MFCO 2481 24 8.1 7.1 3.5 <0.5 1.8 5.0 7.8 24 SHST 3023
MFCO 2781 27 8.1 7.1 3.5 <0.5 1.8 5.2 7.8 25 SHST 3023
MFCO 3081 30 8.1 7.1 3.5 <0.5 1.8 5.4 7.8 26 SHST 3023
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 137
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:30 Pagina 11
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 138
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:30 Pagina 12
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
KIST
kitstat
The proliferation of mobile telecommunication networks (GSM, UMTS, WiMax, etc.) has lead to the need of radio
station infrastructures able to guarantee suitable quality standards, fast installation, limited costs and the possible
use in any type of environmental situation, avoiding civil works and foundations. kitstat, the integrated radio
base station developed by calzavara, is the answer to the most varied needs of the sector operators.
kitstat is an integrated radio base station Rapid Deployment Unit (RDU), in which the equipment housing is
comprised of a special 20” container equipped to contain, during transportion, all the station infrastructures,
assembly accessories, radiant systems, storage batteries, electrical and radio equipment. The aim is to supply a
product which can be quickly and easily transported and assembled on site, without the need of civil works and
foundations and suitable for any environmental condition.
The equipment and power container, which has a reinforced structure with two access doors, is divided by an
intermediate partition to create two separate rooms (E or A2 and A).
Room A is used for housing the electrical and radio equipment. Room E is used during transport to store the
support infrastructures, radiant systems and accessory components. Once installation has been completed, it can
be used as a power room for housing the back-up batteries or as an additional equipment room (room A2), which
can be used by a second operator. Conversion of the power room (room E) into a second equipment room (room
A2), can be achieved by means of a special upgrade kit.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 27 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (at operational wind speed) <0.5°
The standard supply provides the minimum configuration required for kitstat
commissioning, excluding radiant systems and mounts.
• equipped and power container (special container 20”)
• base structure comprising bolted beams and windbraces
• access ladder to the container roof and parapets on the container roof
Supply
• antenna support pole consisting of steel tube with a maximum length of 6 m each
• pole climbing ladder with rigid anchor line (EN 353-1)
• vertical fixing system for feeders and service cables
• galvanized steel guys with relative turnbuckles
• ballast weights
• installation, use and maintenance manual
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 139
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:30 Pagina 13
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 140
Catal staz mobili_09:02_Alberi artificiali 21/07/09 17:07 Pagina 14
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
5.0 m
antenna
support pole
steel guys
climbing ladder
FRONT VIEW
L
PLAN VIEW
container
equipment room equipment storage room
- room A - - room E -
2435 mm
ballast
6055 mm
base
access ladder
CONTAINER PLAN structure
Structure height Dimensions Max antenna Twist & Max pressure Gross weight Ballast Packing
Article H B L load Sway* to ground (excluding ballast) weight volume
m m m m2 degree kg/cm2 tons tons m3
KIST 2460 24 6.0 6.2 2.0 <0.5 0.5 9.4 1.0 38
KIST 2760 27 6.0 6.2 2.0 <0.5 0.5 9.6 2.0 38
KIST 3060 30 6.0 6.2 2.0 <0.5 0.5 9.8 3.5 38
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 141
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:30 Pagina 15
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 142
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:31 Pagina 16
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
KICO
compact
kitstat
The proliferation of mobile telecommunication networks (GSM, UMTS, WiMax, etc.) has lead to the need of radio
station infrastructures able to guarantee suitable quality standards, fast installation, limited costs and the possible
use in any environmental situation, avoiding civil works and foundations.
compact kitstat with flanged pole is a Rapid Deployment Unit (RDU), allowing easy and fast erection in narrow
sites, without any need of foundation and civil works. Their use is strategic for the rapid expansion of cellular
networks, putting into service point to point radio links
The base frame is composed of steel galvanized beams and precast concrete slabs. It is designed to place a
shelter of up to 3 m and it is equipped with open type grillage flooring and surrounded by grating fencing. The
installation can be completed in one working day, since no foundation and civil works are requested.
The antenna supporting structure supplied complete with climbing ladder and anchored to the steelwork base
frame, is a flanged pole composed by tubular flanged sections with a height up to 30 m and two or three steel
guys series.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 27 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (at operational wind speed) < 0.5°
The standard supply provides the minimum configuration required for compact-kitstat
commissioning, excluding radiant systems and mounts.
• base frame for shelter and pole fixing
• working platform at 4 m level, with parapets and access ladder
• antenna support pole consisting of steel tube with a maximum length of 6 m each
Supply
• pole climbing ladder with rigid anchor line (EN 353-1)
• vertical fixing system for feeders and service cables
• galvanized steel guys with relative turnbuckles
• ballast weights fixed under the base frame
• installation, use and maintenance manual
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 143
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:31 Pagina 17
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
R D U Rapid Deployment Unit KICO compact-kitstat
5.0 m
antenna
support pole
climbing ladder
H
steel guys
shelter
(option)
base frame
FRONT VIEW
L
ballast
weights
B
PLAN VIEW
Structure height Dimensions Max antenna Twist & Max pressure Gross weight Ballast Packing
Article H B L load Sway* to ground (excluding ballast) weight volume
m m m m2 degree kg/cm2 tons tons m3
KICO 2440 24 4.0 4.0 3.0 <0.5 1.0 4.3 14.0 19
KICO 2740 27 4.0 4.0 3.0 <0.5 1.0 4.5 14.0 19
KICO 3040 30 4.0 4.0 3.0 <0.5 1.1 4.7 15.3 20
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 144
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:31 Pagina 18
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
quickrawland
QKRL
The quickrawland with polygonal pole is a Rapid Deployment Unit (RDU), allowing an easy and fast erection in
narrow sites, without any need of foundation and civil works. Their use is strategic for the rapid espansion of
cellular networks, putting into service point to point radio links.
The base frame is composed of steel galvanised beams and precast concrete slabs. It is designed to place a
shelter of up to 3 m and it is equipped with open type grillage flooring and surrounded by grating fencing. The
installation can be completed in one working day, since no foundation and civils works are requested.
The antenna supporting structure consisting of polygonal pole with a height up to 30 m, is supplied complete
with climbing ladder with rigid anchor line (EN353-1) and vertical fixing system for feeders and service cables.
The pole is anchored to the square steelwork base frame by means of a base flange. The base frame is fixed to
precast concrete slabs, laying on the ground.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Design wind speed (Eurocode 1 - EN 1991) 27 m/s (q10=1.2 kN/m2)
• Design wind speed (EIA 222) 160 km/h (q10=1.2 kN/m2)
• Constant operational wind speed on entire height 100 km/h
Design
• Top deflection (at operational wind speed) < 0.5°
The standard supply provides the minimum configuration required for quickrawland
commissioning, excluding radiant systems and mounts.
• precast concrete slab foundation (ballast weights)
• square steelwork base frame
• grillage flooring and surrounded by grating fencing
Supply
• self-supporting polygonal pole
• pole climbing ladder with rigid anchor line (EN 353-1)
• vertical fixing system for feeders and service cables
• packing list with assembly and maintenance instructions
• packing
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 145
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
Catal staz mobili_09:02_Alberi artificiali 21/07/09 16:29 Pagina 19
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 146
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:31 Pagina 20
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
3.0 m
climbing ladder
1
2
3
H
polygonal pole 1
FRONT VIEW
shelter
2
(option)
fencing 3
L
base frame 4
B
concrete slabs 5
PLAN VIEW
Structure height Dimensions Max antenna Twist & Max pressure Gross weight Ballast Packing
Article H B L load Sway* to ground (excluding ballast) weight volume
m m m m2 degree kg/cm2 tons tons m3
QKRL 1861 18 6.1 6.1 3.5 <0.5 0.8 8.5 18.3 32
QKRL 2461 24 6.1 6.1 3.5 <0.5 0.8 9.6 18.3 40
QKRL 3061 30 6.1 6.1 3.5 <0.5 0.8 11.0 18.3 48
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 147
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:31 Pagina 21
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 148
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:31 Pagina 23
COW
Cell on Wheels
MFTR
mobiflanged
MTUC
mobicompact
MTCO
mobipole
MTOT
mobitrailer
calzavara
h e l p i n g w o r d s t o f l y
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:31 Pagina 24
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
MFTR
mobiflanged
The mobile radio base stations with flanged pole are telecom infrastructures, placed on trailer approved for road
use, towed by heavy goods vehicles for loads of up to 3500 kg. These mobile radio base stations guarantee full
operation in just one day and in restricted spaces. Their use is strategic for the rapid extension of cellular networks,
putting into service point to point radio connections, as well as supporting the increased traffic volume in case of
extraordinary events (trade fairs, sporting events and concerts, emergencies, catastrophic events, etc.).
The mobile support structure is composed of a special trailer with retracting stabilizers approved for road use.
The trailer, able to house a minishelter for radio equipment, is equipped with:
• automatic reverse
• parking brake
• independent suspensions with torsion bar
• lighting equipment with rear lights conforming to the latest EEC directives
• adjustable geometry variable mechanical drawbar with eye Ø 45 mm
The antenna supporting pole, with climbing ladder up to the summit, is fixed to the main base frame and it is
composed of cylindrical flanged sections integrated by two or three sets of guys with a standard height of up to
20 meters. The flanged pole mobile station, installable in eight hours, does not require civil works or foundations,
and is complete of lateral ballast concrete weights and a working platform in checkered plate.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Constant max wind speed on entire height 150 km/h
• Constant operational wind speed on entire height 100 km/h
• Top deflection (at operational wind speed) < 0.5°
Design
The standard supply provides the minimum configuration required for pole
commissioning, excluding radiant systems and mounts.
• trailer approved for road use, with a overall carrying capacity of 3500 kg
• trailer working platform in checkered plate with access ladder and parapets
• retracting stabilizers with adjustable jacks
Supply
• pole consisting of steel tubes, in sections, with a maximum length of 3m each
• top antenna support pole 4m length
• pole climbing ladder with rigid anchor line (EN 353-1)
• vertical fixing system for feeders and service cables
• guys consisting of galvanized steel cables with relative turnbuckles in ancillaries box
• ballast weights (only for 20m height)
• installation, use and maintenance manual
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 150
Catal staz mobili_09:02_Alberi artificiali 21/07/09 17:07 Pagina 25
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C O W Cell on Wheels MFTR mobiflanged
4.0 m
antenna
support pole
climbing ladder
steel guys
flanged pole
FRONT VIEW
shelter
(option)
trailer working
platform
L
PLAN VIEW
trailer
retracting stabilizers
Structure height Dimensions Max antenna Twist & Max pressure Gross Packing Shelter type
Article H B L load sway* to ground weight volume (optional)
m m m m2 degree kg/cm2 tons m3 m3
MFTR 1462 14 6.2 6.2 1.8 <0.5 0.5 3.5 20 SHMI 1623
MFTR 1762 17 6.2 6.2 1.8 <0.5 0.5 4.0 22 SHMI 1623
MFTR 2062 20 6.2 6.2 1.8 <0.5 0.5 4.5 22 SHMI 1623
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 151
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:32 Pagina 26
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
MTUC
mobicompact
The mobile stations with self-mounting pole are portable structures, towed by heavy goods vehicles for loads of
up to 3500 kg. These mobile radio base stations guarantee full operation in three hours and in restricted spaces.
Their use is strategic for the rapid extension of cellular networks, putting into service point to point radio
connections, as well as supporting the increased traffic volume in case of extraordinary events (trade fairs,
sporting events and concerts, emergencies, catastrophic events, etc.). The mobile s upporting structure corresponds
to a special two-axle trailer with telescopic stabilizers approved for road traffic. The trailer, on which it is
possible to install an outdoor cabinet for technological equipment, is equipped with:
• automatic reverse
• parking brake
• independent suspensions with torsion bar
• lighting equipment with rear lights conforming to the latest EEC directives
• adjustable geometry variable mechanical drawbar with eye Ø 45 mm
The antenna supporting pole, with standard height of up to 20 m, is made of aluminium and comprises of three
telescopic tubular elements. Installation is easy and fast, and is carried out with manual winches.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Constant max wind speed on entire height 150 km/h
• Constant operational wind speed on entire height 100 km/h
• Top deflection (at operational wind speed) <0.5°
Design
The standard supply provides the minimum configuration required for mobicompact
commissioning, excluding radiant systems and mounts.
• trailer approved for road use, with a overall carrying capacity of 3500 kg
• trailer working platform in checkered plate with access ladder and parapets
• retracting stabilizers with adjustable jacks
Supply
• aluminium telescopic antenna pole
• antenna pipe mount complete with brackets for 3 panel antennas
• climbing ladder with rigid anchor line (EN 353-1) on base shaft of the pole
• galvanized steel guys with relative turnbuckles in ancillaries box
• installation, use and maintenance manual
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 152
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C O W Cell on Wheels
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:32 Pagina 27
MTUC mobicompact
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 153
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:32 Pagina 28
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
3.5 m
antenna pipe
mount
steel guys
antenna pole
FRONT VIEW
climbing ladder
L
retracting
stabilizers
B
Structure height Dimensions Max antenna Twist & Max pressure Gross weight Packing Shelter type
Article H B L load Sway* to ground (excluding ballast) volume (optional)
m mm mm m2 degree kg/cm2 tons m3 m3
MTUC 1862 18 6.2 5.7 1.5 <0.5 0.3 3.1 20 SHMI 1623
MTUC 2062 20 6.2 5.7 1.5 <0.5 0.3 3.1 20 SHMI 1623
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 154
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C O W Cell on Wheels
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:32 Pagina 29
MTUC mobicompact
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 155
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:32 Pagina 30
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
MTCO
mobipole
The mobile stations with self-mounting pole are portable structures, towed by heavy goods vehicles for loads of up
to 7500 kg. These mobile radio base stations guarantee full operation in three hours and in restricted spaces. Their
use is strategic for the rapid extension of cellular networks, putting into service point to point radio connections, as
well as supporting the increased traffic volume in case of extraordinary events (trade fairs, sporting events and
concerts, emergencies, catastrophic events, etc.). The mobile supporting structure corresponds to a special two-axle
trailer with retracting stabilizers approved for road traffic. The front axle is a turn table steering axle with fifth wheel.
The trailer, on which it is possible to install a shelter for housing technological equipment, is equipped with:
• compressed air brakes system with ABS
• parking brake on the second axle
• independent rubber suspensions with torsion bar
• chassis with structural steel and platform in checkered plate
• drawbar eye with an inner bush Ø 45 mm
• lighting equipment with rear lights conforming to the latest EEC directives
The antenna supporting pole, with a standard height of up to 20 m, is made of aluminium and comprises of three
telescopic tubular elements. Installation is easy, fast and is carried out by means of manual winches.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Constant max wind speed on entire height 150 km/h
• Constant operational wind speed on entire height 100 km/h
• Top deflection (at operational wind speed) <0.5°
Design
The standard supply provides the minimum configuration required for mobipole
commissioning, excluding radiant systems and mounts.
• trailer approved for road use with a overall carryng capacity of 7500 kg
• trailer working platform in checkered plate with access ladder and parapets
• retracting stabilizers with adjustable jacks
Supply
• aluminium telescopic antenna pole
• climbing ladder with rigid anchor line (EN 353-1) on base shaft of the pole
• galvanized steel guys with relative turnbuckles in ancillaries box
• installation, use and maintenance manual
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 156
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C O W Cell on Wheels
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:32 Pagina 31
MTCO mobipole
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 157
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:33 Pagina 32
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
3.5 m
antenna pipe
mount
steel guys
antenna pole
FRONT VIEW
L
climbing ladder
shelter
(option)
B
retracting stabilizers
PLAN VIEW
generating set
(option)
Structure height Dimensions Max antenna Twist & Max pressure Gross Packing Shelter type
Article H B L load Sway* to ground weight volume (optional)
m m m m2 degree kg/cm2 tons m3 m3
MTCO 1875 18 7.5 5.5 1.5 <0.5 0.5 4.3 30 SHST 3023
MTCO 2075 20 7.5 5.5 1.5 <0.5 0.5 4.3 30 SHST 3023
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 158
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C O W Cell on Wheels
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:33 Pagina 33
MTCO mobipole
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 159
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:33 Pagina 34
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
MTOT
mobitrailer
The mobile stations with telescopic mast are portable structures, towed by heavy goods vehicles for loads of up
to 12000 kg. These mobile radio base stations guarantee full operation in three hours and in restricted spaces.
Their use is strategic for the rapid extension of cellular networks, putting into service point to point radio
connections, as well as supporting the increased traffic volume in case of extraordinary events (trade fairs,
sporting events and concerts, emergencies, catastrophic events, etc.).
The mobile supporting structure corresponds to a special two-axle trailer with retreating stabilizers approved for
road traffic. The front axle is a turn table steering axle with fifth wheel.
The trailer, on which it is possible to install a shelter (length up to 3 m), is equipped with:
• compressed air brakes system with ABS
• parking brake on the second axle. As a rule the parking brake is designed as a screw hand brake
• independent rubber suspensions with torsion bar
• steel chassis with steel checkered plate flooring
• drawbar eye with an inner bush Ø 45 mm
• lighting equipment with rear lights conforming to the latest EEC directives
The antenna supporting pole, with a standard height of up to 30 m, is made of steel and comprises of three
telescopic tubular elements. Installation is easy, fast and is carried out with manual or electric winches. The unit
is designed to have a generating set (optional) up to 20 KVA.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Constant max wind speed on entire height 180 km/h
• Constant operational wind speed on entire height 100 km/h
• Top deflection (at operational wind speed) <0.5°
Design
The standard supply provides the minimum configuration required for mobitrailer
commissioning, excluding radiant systems and mounts.
• trailer approved for road use with a overall capacity of 12000 kg
• trailer working platform in checkered plate with access ladder and parapets
• retracting stabilizers with adjustable jacks
Supply
• 30 m high telescopic mast for antenna systems installations
• climbing ladder with rigid anchor line (EN 353-1) on base shaft of the pole
• galvanized steel guys with relative turnbuckles in ancillaries box
• installation, use and maintenance manual
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 160
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C O W Cell on Wheels
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:33 Pagina 35
MTOT mobitrailer
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 161
Catal staz mobili_09:02_Alberi artificiali 21/07/09 17:08 Pagina 36
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
5.0 m
antenna support
pole
telescopic mast
steel guys
climbing ladder
FRONT VIEW
shelter
(option)
generating set
(option)
L
retracting
stabilizers
Structure height Dimensions Max antenna Twist & Max pressure Gross Packing Winch Shelter type
Article H B L load Sway* to ground weight volume type (optional)
m m m m2 degree kg/cm2 tons m3 m3 m3
MTOT 3075 MA 30 14.5 13.5 2.4 <0.5 1.5 10 45 manual SHST 3023
MTOT 3075 EL 30 14.5 13.5 2.4 <0.5 1.5 10 45 electric SHST 3023
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 162
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C O W Cell on Wheels
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:34 Pagina 37
INSTALLATION STEPS
TRANSPORT ARRANGEMENT
MTOT mobitrailer
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 163
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:34 Pagina 39
COT
C e l l o n Tr u c k
MTTR
mobitower
calzavara
h e l p i n g w o r d s t o f l y
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:34 Pagina 40
C O T C e l l o n Tr u c k MTTR mobitower
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
MTTR
mobitower
The mobile trucks with container and with self-mounting telescopic mast are portable structures that guarantee full
operation in three hours and in restricted spaces. Their use is strategic for the rapid extension of cellular networks,
putting into service point to point radio connections, as well as supporting to the increased traffic volume in case
of extraordinary events (trade fairs, sport events and concerts, emergencies, catastrophic events, etc.).
The steel interface frame is made of galvanized steel beams and is provided with four retracting stabilizers that
can be retracted under the container for transport.
The equipment and power container, which has a reinforced special 20” box container with two access doors,
divided by an intermediate partition to create two separate rooms (E and A). Room A is used for housing the
electrical and radio equipment. Room E is used as a power room for housing the generating set; and also, during
transport, to contain the radiant systems and accessory components.
The antenna supporting pole, with standard height of up to 20 meters, is made of aluminium and comprises of
three telescopic tubular elements. Installation is easy, fast and is carried out with manual winches.
Structural steel design according to the most recent European Standard. Designs to other
International Standards (EIA, BS, NV65) available upon request.
• Constant max wind speed on entire height 150 km/h
• Constant operational wind speed on entire height 100 km/h
• Top deflection (at operational wind speed) <0.5°
Design
The standard supply provides the minimum configuration required for mobitower
commissioning, excluding radiant systems and mounts.
• equipment and power container (special container 20”)
• steel interface frame
• retracting stabilizers with adjustable jacks
Supply
• access ladder to the container roof and parapets on the container roof
• antenna support pole consisting of telescopic aluminium pole
• antenna pipe mount complete with brackets for 3 panel antennas
• climbing ladder with rigid anchor line (EN 353-1) on base shaft of the pole
• vertical fixing system for feeders and service cables
• guys consisting of galvanized steel cables with relative turnbuckles in ancillaries box.
• installation, use and maintenance manual
For a description of the accessories and ordering information, please refer to the
Accessories catalogue.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 165
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C O T C e l l o n Tr u c k
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:34 Pagina 41
MTTR mobitower
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 166
Catal staz mobili_09:02_Alberi artificiali 21/07/09 17:16 Pagina 42
C O T C e l l o n Tr u c k MTTR mobitower
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
3.5 m
telescopic
antenna pole
steel guys
H
climbing ladder
container
FRONT VIEW
truck
(not included)
L
PLAN VIEW
Structure height Dimensions Max antenna Twist & Max pressure Gross weight Packing
Article H B L load Sway* to ground (excluding trailer) volume
m m m m2 degree kg/cm2 tons m3
MTTR 2085 20 8.5 7.5 3.0 <0.5 1.5 6.5 25
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 167
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
C O T C e l l o n Tr u c k
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:34 Pagina 43
MTTR mobitower
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 168
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:34 Pagina 44
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
Supporting mainframe
The shelter basically consists of a supporting mainframe made
of hot extruded sections in aluminium alloy EN AW-6060 UNI
EN 573-3/96, which contains and encapsulates the external
cladding in order to obtain a monolithic body after
manufacturing is completed.
Thermal insulation
The thermal insulation of the shelter is ensured by polyurethane
foam panels, thickness 80 mm (density 40 Kg/m3).
The global heat transfer coefficient is approx. 0.5 W/m 2K.
Access door (n+1 configuration) rectifiers and two batteries and have the
The access door is built with a frame made of aluminium. following main electrical characteristics:
The door (width 800 mm - height 2000 mm) is equipped with • 400/230 V ac (3-phase+Neutral) - 50 Hz
non-detachable stainless steel hinges and with a lock fitted with Air-conditioning system
an anti-panic device. The air-conditioning system is composed of compact conditioning
Equipment room units with free cooling function.
The equipment room is equipped with:
Conditioning unit Fan Heating
• integrated board with ac power distribution and dc power system Article
• batteries W m3/h W
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 169
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:35 Pagina 45
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 170
Catal staz mobili_09:02_Alberi artificiali 21/07/09 17:16 Pagina 46
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
Plan view Section A - A Front View RF cable entry
cable ladder
RF cable
entry
S.E./ Battery
Q.E.
2310 mm
2000 mm
2575 mm
2130 mm
2300 mm
RF cable cable ladder
entry
A A
1430 mm 2300 mm
1600 mm
RF cable
entry
Q.E. S.E. Battery
2310 mm
2000 mm
2575 mm
2130 mm
2300 mm
A A
2130 2300 mm
2300
2575 mm
2130 mm
2300 mm
2000 mm
A A
2830 mm 2300 mm
3000 mm
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 171
Catal staz mobili_09:02_Alberi artificiali 21/07/09 17:16 Pagina 47
MINI
COMPACT
MTCO mobipole
STANDARD
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 172
Catal staz mobili_09:02_Alberi artificiali 21/07/09 17:16 Pagina 48
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
The generating set consists of a diesel engine and a 3-phase
(400 V - 50Hz), synchronous, brushless alternator, self-excited
and self-regulated with insulation class H.
The diesel engine is water cooled with 1500 RPM (continous use)
and it is provided with 12 V electric starter, pump injection with
regulator, air filter, lubricating oil with fuel filters cartridge and
heat exchanger.
All the equipment is fixed to a base-plate which carries both the
engine and the generator, directly connected by means of a plate
coupling and complete with vibration dampers. The fuel tank is
mounted on a bedplate and has a max. capacity of 3 days'
operation.
The generating set is supplied complete with an electrical control
panel and automatic Mains Failure Panel with magnetic setting
circuit breaker 4 poles and with changeover switch, 2 CEE
sockets, starting key and alarm warning lights
The generating set includes a dampered cabin with a residual
acoustic level of 70 dBA at 7 m.
Operating conditions:
• nominal temperature 20 °C
• max./min. temperature + 40 °C / - 10 °C
• relative humidity 60%
The control board contains all the functions for the management
of the generating set:
• module for engine protection and controls for diesel or
gasoline generators
• measurement unit, displaying all main electric values
• control module for two different feeding sources (automatic
mains failure)
It has been designed for monitoring the rates of alternate tension
in a monophase system, triphase or triphase with neutral and to
commute the load when the tension is out of the designated limits.
Technical features
• nominal voltage battery 12Vdc generating set
• nominal voltage generator/mains 100÷265 Vac L-N
• frequency range 45÷65 Hz
• degree of protection front board IP65
• operating temperature -20 / +50°C
NETWORK
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 173
Catal staz mobili_09:02_Alberi artificiali 21/07/09 17:16 Pagina 49
The mobile station can be converted into a fixed radio base 5. Dig a hole under each foot.
station by modifying the arrangement of the support feet and
ballast weights. Conversion is possible with a few easy steps:
2. Cast concrete into the excavation to fill the area between the
ballast weights and the ground, after having inserted the
special steel bars.
cast
concrete
30 - 40cm
excavation
3. Once casting has been completed and when the concrete has
reached a suitable strength, ‘release’ the support feet by
slackening the adjusting screws (the station will rest entirely on
the ballast weights and on the cast concrete base beneath
them).
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - mobile & kit radio stations 2009 - page 174
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:35 Pagina 50
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:35 Pagina 51
Catal staz mobili_09:02_Alberi artificiali 21/07/09 15:35 Pagina 52
All legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. All data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development.
CONDITIONS OF USE
If not otherwise specified, in the documentation supplied together with the product (calculation report and user and maintenance
manual), the following are the STANDARD use conditions foreseen for supplies from catalogue:
CONDIZIONI DI UTILIZZO
Se non diversamente specificato nella documentazione fornita congiuntamente al prodotto (relazione di calcolo e manuale d’uso e
manutenzione), le condizioni di utilizzo STANDARD previste per le forniture a catalogo sono le seguenti:
STRUCTURAL PARTS Operating temperature Operational wind speed* Design wind speed
PARTI STRUTTURALI Temperature di esercizio Vento di esercizio* Vento di progetto
°C Km/h Vedi indicazioni riportate nelle pagine specifiche del presente catalogo
-10 +60 100 See details reported in specific pages of present catalogue
Mechanical elements
from -10 to +40 not applicable C3 - Media
Componenti meccanici
WARRANTIES
calzavara guarantees that the products sold are defect-free making them suitable for the use for which they were designed and are free
from any other operating defect except for what forseseen by the following.
Non-structural parts: should the purchaser find within the first 12 months from delivery of the product defects relative to non-structural
parts, coatings or surface protection treatments, calzavara undertakes to repair or replace (at its discretion) the part of the product found
defective at calzavara’s headquarters, provided that the purchaser has used the product according to the conditions of use set out in
the previous section (except for other instructions given in the specific user and maintenance manual if delivered together with the
Product) and the said defect has been duly communicated to calzavara within the terms and manner established by the existing Italian
law.
Structural* parts: calzavara undertakes to guarantee the proper working of the product sold for the period of three years from delivery
date provided that the purchaser has used the product according to the conditions of use set out in the previous section (except for other
instructions given in the specific user and maintenance manual and/or in the calculations report delivered together with the product)
and the said defect has been duly communicated to calzavara within the terms and manner established by the existing Italian law.
*For structural parts it is intended all and only resistant steel elements strictly essential for the conservation of the structural equilibrium
as defined in the specific calculations report.
Ruling legislation and jurisdiction: The Italian law court of Udine shall be the ruling court for any controversy or claims arising.
The ruling language will be Italian.
GARANZIE
calzavara garantisce che i prodotti venduti sono immuni da vizi che li rendano non idonei all’uso a cui sono destinati e da ogni altro
difetto di funzionamento salvo quanto di seguito previsto.
Parti non strutturali: qualora l’acquirente rinvenga nel termine di un anno dalla consegna del prodotto dei vizi inerenti le parti non
strutturali, i rivestimenti o i trattamenti superficiali di protezione, calzavara si impegna a riparare o sostituire (a sua discrezione) la parte
del prodotto accertata difettosa presso la sede della calzavara, purché l’acquirente abbia utilizzato il prodotto secondo le condizioni
di utilizzo di cui al punto precedente (salvo diverse indicazioni stabilite negli specifici manuali d’uso e manutenzione se consegnati
congiuntamente al prodotto) e lo stesso abbia tempestivamente denunziato i vizi a calzavara nei termini e con le modalità stabilite dalla
normativa italiana in materia.
Parti strutturali*: calzavara si impegna a garantire il buon funzionamento del prodotto venduto per il periodo di tre anni dalla data di
consegna, purché l’acquirente abbia utilizzato il prodotto secondo le condizioni di utilizzo di cui al punto precedente (salvo diverse
indicazioni stabilite negli specifici manuali d’uso e manutenzione e/o nelle relazioni di calcolo consegnati congiuntamente al Prodotto)
e lo stesso abbia tempestivamente denunziato i vizi a calzavara nei termini e con le modalità stabilite dalla normativa italiana in materia.
*Per parti strutturali si intendono tutti e solo gli elementi resistenti in acciaio strettamente indispensabili alla conservazione dell’equilibrio
strutturale come definito nelle specifiche relazioni di calcolo.
Legislazione e foro competente: Qualsiasi controversia sarà regolata dalla Legge Italiana. Il foro competente sarà quello di Udine.
Il testo di riferimento è in lingua italiana.
calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - rawland, rooftop & passive repeaters 2009 - page 177