Professional Documents
Culture Documents
Diy Modern Outdoor Dining Set: This Outdoor Dining Set Is Made From Painted 2x4s and Hardwood Deckboards
Diy Modern Outdoor Dining Set: This Outdoor Dining Set Is Made From Painted 2x4s and Hardwood Deckboards
TABLE
STEP 1: Cut and paint the pieces
I used a miter saw to cut the pieces to length. I lightly sanded the
pieces with an orbital sander before painting the 2x4 pieces with A
B
exterior grade paint. I stained the hardwood decking with a
C
transparent water proof stain. D
E
A x9 Hardwood Decking 3/4” by 3-1/2” by 6’
C
STEP 3: Screw the legs on
I used 2-1/2” long stainless steel screws to assemble the
C
frame of the table. I pre-drilled holes in the 2x4s to avoid
splitting and used 4 screws per leg.
BENCH
STEP 1: Cut and paint the pieces
I used a miter saw to cut the pieces to length. I lightly sanded the
pieces with an orbital sander before painting the 2x4 pieces with
exterior grade paint. I stained the hardwood decking with a
transparent water proof stain. F
G
F x9 Hardwood Decking 3/4” by 3-1/2” by 62” H
I
G x2 Painted 2x4 1-1/2” by 3-1/2” by 58-1/2” J
G
STEP 2: Screw the pieces together
I used 3” long stainless steel screws to assemble the frame of
the table. I pre-drilled holes in the 2x4s to avoid splitting. G
H
STEP 3: Screw the legs on H
I used 2-1/2” long stainless steel screws to assemble the
frame of the table. I pre-drilled holes in the 2x4s to avoid splitting
and used 4 screws per leg. H
F
STEP 5: Screw the top on
I used 1-5/8” long stainless steel screws to screw the hardwood
decking to the frame. I pre-drilled and counter sunk holes in the
hardwood decking to avoid splitting. I started with the outside boards
and let them overhang the legs by 1/4”. I then arranged the inside board
so that it has even spacing on both sides.