Professional Documents
Culture Documents
Installation
In the Box
Ladybird
Ladybird Sensor (Current Clamp)
Micro USB Charger Cable
User Guide
If you would prefer to watch a video on how to set up your Ladybird, please
visit our website at www.ladybirddynamic.com
Step 1
Locate the cable between your electricity meter and mains fuse box. This is
located on the far right for a 4 cable meter.
If your electricity meter looks different to the diagram and you are unsure
as to which is the correct cable - please contact us and we’ll be happy to
help you
Step 2
Plug the blue sensor cable into your Ladybird Sensor Port.
Please ensure the cable is securely plugged into the sensor port
Step 3
Open the blue sensor and attach it to the cable indicated in step 1 in the
position shown. The arrows on the sensor should be pointing down, away
from the meter.
You can gently attach the sensor to the cable yourself. If your cable is
damaged or appears damaged, frayed or appears unsafe however, please do
not touch the unit. Contact us or seek professional advice immediately.
Step 4
Turn on the power switch on your Ladybird. This switch is located at the
bottom of your Ladybird.
Your Ladybird should quickly start up once she starts glowing.
Once your Ladybird is glowing, You are good to go! For any issues, please
visit the troubleshooting page or feel free to contact us…
Through our website or email our team for tech support.
You can also use the Ladybird Smart Assistant chat to get support...
Step 5
Log into your Ladybird App and check if your Ladybird is running as
expected…
Feedback
If you're satisfied with your setup process, please write a review about your
experience. If there are things we could do better, please contact us and
we'll be happy to solve any issues you may be having.
Address: