PROPOSE Note-1 - The canopy cannot be connected to the existing post grid because it will clash with the joint girt Propose Note-1 - We changed the canopy distance from 1610 to 1400 & 1310 so there is an Note-2 - For the top canopi cannot be connected because there is no post additional add post Propose Note-2 - For connection to conopy we add post DESIGN DRAWING CANOPY PROPOSE DRAWING CANOPY ( CANOPY TYPE B ) ( CANOPY TYPE B - LINE G) PROPOSE Note-1 - The joint bolt upper canopy clashes with gusset plate Add post Propose Note-1 - We changed the length of the gusset plate to 60mm which was welded Note-2 - The upper canopy clashes with existing door post joint (bolt) to the add post (80mm design) Propose Note-2 - We changed the canopy distance from 1610 to 1400 so there is an additional add post