You are on page 1of 1

Visual and Magnetic Particle Inspection Report

CUSTOMER: Weatherford REPORT DATE: 20 11 2020 REPORT NO:5981969


LOCATION: Weatherford Base Page:1 OF 1 WORK ORDER N°:

Specification: ASTM E 1444 / E709


Inspection method: Wet visible Magnetizing method: continues
Association standard : BS EN 970

EQUIPMENT USED CONSUMABLES AC YOKE/ PULL 1O LBS: YES VOLTAGE: 110 V


POLE SPACING: 2” TO 4”
AC YOKE SN°: 7973
TEST WEIGHT: 10 LBS SN°:A205
type : pfinder PARTICLE CONCENTRATION:2.4 / 100ML
LIGHT METER SN°:1320005430 Batch N°: L1101604
MAGNETIC FIELD INDICATOR: LIGHT TYPE : NATURAL INTENSITY :1100 LUX
CASTROL STIP type : pfinder TEST TEMPERATURE: 25 C°
ASTM Centrifuge Tube 100 ml Batch N°: L1101278 SURFACE CONDITION: CLEANED TO BARE METAL

DESCRIPTION

TABLE.

IDENTIFICATION N°:
WFJ T02

PARTS EXAMINED: CRITICAL STRESSED AREAS

Inspection result:
No obvious visual damage noted.
All Welding areas were inspected by Magnetic particle inspection and found to be free of surface
defects at time of inspection.

x Accepted Rejected Next inspection due date: 19-11- 2021

INSPECTOR: KHALIL CHABBOUH CUSTOMER REPRESENTATIVE

SIGNATURE SIGNATURE

Rev.1 (02/06/2014) ABS / INSPECTION REPORT – IR10

You might also like