Professional Documents
Culture Documents
Design EH and EHA Control Valves
Design EH and EHA Control Valves
2:EH
W4182–1/IL
W2992–1 / IL
W3387 / IL
D100042X012
Bulletin 51.2:EH
Contents Material Selection Guidelines . . . . . . . . . 16
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tables
Availability Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1-1/2 x 1 through 6-Inch Globe Valves Liquid Flow Coefficients (8- to 14-Inch) . . . . . . . . . 4
3- through 8-Inch Angle Valves . . . . . . . . 5 Available Valve Configurations and Sizes . . . . . 12
Trims (1-1/2 x 1 through 6-Inch Globe Valves, Valve Sizes and End Connection Styles . . . . . . 12
3- through 8-Inch Angle Valves . . . . . . . . . . . . . . . 6 Increased Pressure/Temperature Ratings . . . . . 13
Port Diameters, Valve Plug Travel, Yoke
8- through 14-Inch Globe Valves ....... 7 Boss Diameters for TSO Trim . . . . . . . . . . . . . 13
Principle of Operation Shutoff Classifications . . . . . . . . . . . . . . . . . . . . . . 14
(8- through 14-Inch Globe Valves) . . . . . . . . . . . . . 7 Trim Material Combinations . . . . . . . . . . . . . . . . . 17
Construction Materials and Temperature
Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
20-Inch Globe Valves .................... 9
Valve Plug Travel (8- to 14-Inch) . . . . . . . . . . . . . 21
Custom Design Capability Additional Specifications . . . . . . . . . . . . . . . . . . . . 25
(20-Inch Globe Valves) . . . . . . . . . . . . . . . . . . . . . . 10 Yoke Boss and Valve Stem Diameters . . . . . . . . 27
Backseats (20-Inch Globe Valves) . . . . . . . . . . . . . . 10 Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
C-seal Trim Description . . . . . . . . . . . . . . . . 11
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Fisher TSO (Tight Shutoff)
Trim Capabilities . . . . . . . . . . . . . . . . . . . . . . . . 11 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
2
Bulletin 51.2:EH
Design EH (globe) D Longer Trim Life—Hardened materials of
construction for the cage, valve plug, cage guiding,
J Design EHS (1-1/2 x 1 through 6-Inch), J Design
and other trim parts are standard for all applications,
EHD (1-1/2 x 1 through 20-Inch), and J Design EHT
providing excellent wear resistance. In all applications,
(1-1/2 x 1 through 14-Inch)
rugged cage guiding provides increased valve plug
stability. Increased stability results in reduced vibration
and other mechanical stresses, which contributes to
Design EHA (angle) longer trim life.
J Design EHAS (3- through 8-Inch), J Design EHAD D Piping Economy—The availability of expanded
(3- through 8-Inch), and J Design EHAT (3- through end connections on Design EH valves may eliminate
8-Inch) the need for line swages while accommodating over-
sized piping arrangements.
D Control of Low Flow Rates/Tight Shut-off—
Micro-Formt or Micro-Flutet valve plugs (figure 5 or
6) provide superb rangeability in high-pressure, low-
EH Series Valves flow applications. A choice of several restricted port
These valves are specially designed for high-pressure diameters helps match valve capacity to required flow,
applications. Design EH valve configurations incorpo- assures necessary control with full travel, and helps
rate proven techniques in flow-stream contouring for prevent throttling near the seat.
higher capacities and in valve trim design for reliability For EHA valves only, and in low-flow applications
in severe applications. where cavitation damage may occur, the Micro-Flatt
style valve plug can be used. For soot-blower applica-
The temperature limits of Design EHT valves can be tions, where the valve must provide tight shut-off, a
extended above 232_C (450_F) by using PEEK (Poly- special trim design is available. Please contact your
EtherEtherKetone) anti-extrusion rings in combination Fisher Controls sales office for more information.
with a spring-loaded PTFE seal. The PEEK anti-extru-
sion rings expand to close off the clearance gap be- For low-flow applications where cavitation damage
tween the plug and the cage where the PTFE seal may occur and the minimum required Cv is equal to or
may extrude at high temperatures and pressures. The greater than 0.05, CavitrolR III with Micro-Flat trim can
temperature limits are extended to 316_C (600_F) for be used in both Design EH and Design EHA valves.
non-oxidizing service and to 260_C (500_F) for oxidiz- Please contact your Fisher Controls sales office for
ing service. more information.
D High-Temperature, Class V Shutoff—Use of
C-seal trim (see figure 20) permits Class V shutoff up
to 593_C (1100_F).
3
Bulletin 51.2:EH
Table 2. Liquid Flow Coefficients, Cv, at Maximum Travel
PACKING with Equal Percentage Cage (Modified Equal
BOX Percentage Characteristic) (8- through 14-Inch Valves)
STUD
VALVE VALVE SIZE, INCHES
CLASS
DESIGN 8 & 10 12 & 14
SPRING
1500 912 1830
EHD EHT
EHD,
2500 584 1010
4
Bulletin 51.2:EH
W3387 / IL W3379-1 / IL
5
Bulletin 51.2:EH
Trims (1-1/2 x 1 through 6-Inch Globe Valves 3- through 8-Inch Angle Valves)
W5028-1 / IL
W5043-1 / IL
W5029-1 / IL
RETAINING
RING
BACKUP RING
PRESSURE-
ASSISTED
SEAL RING
W5041-1 / IL
6
Bulletin 51.2:EH
VALVE STEM
GASKETS
CAGE
PISTON RINGS
PIN
VALVE
PLUG
SEAT RING
CAP SCREW
GASKET
SEAT RING
W4425–1 / IL
Figure 11. Design EHD Valve Assembly (8- through 14-Inch Globe Valves)
7
Bulletin 51.2:EH
RETAINING
RINGS
BACKUP
RING
PRESSURE-
ASSISTED
SEAL RING
W4430-1 / IL
DIVERTER
CONE
SEAT
RING
VALVE
BODY
SPIRAL
WOUND
GASKET
SEAT RING
CAP SCREW
SPIRAL WOUND GASKET CONSTRUCTION
(STANDARD CONSTRUCTION)
SEAT
RING
VALVE
BODY
O-RING
SEAT RING
W4429-1 / IL CAP SCREW
W4428-1 / IL
OĆRING GASKET CONSTRUCTION
(STANDARD CONSTRUCTION FOR SOUR GAS SERVICE AND
OPTIONAL FOR OTHER VALVE CONSTRUCTIONS)
Figure 14. Design EHD Trim with Whisper Trim III Level D
Cage (8- through 14-Inch Globe Valves) Figure 16. Seat Ring Gasket Constructions
(8- through 14-Inch Globe Valves)
8
Bulletin 51.2:EH
VALVE PLUG
AND STEM
ASSEMBLY
CAGE
SEAT RING
W4282–2/IL
9
Bulletin 51.2:EH
Custom Design Capability (20-Inch Globe Valves)
evaluation. Flow testing of these large valves takes Figure 19. Custom Design Sequence (20-Inch Globe Valves)
place at Fisher Controls’ R.A. Engel Technical Center
Flow Laboratory, the largest facility of its kind in North
America.
Backseats (20-Inch Globe Valves)
Backseats are provided on the 20-inch Design EHD
The final control valve assembly can be guaranteed for valve only as a means of limiting leakage in the unlike-
reliable, dependable performance. This performance ly event of a significant packing failure.
delivers controllability for not only the control valve but
also the plant control system, sliding pressure or other- Backseating is not intended as a means for changing
wise. packing on-line.
10
Bulletin 51.2:EH
STAKE THREAD
PISTON
RING
RETAINER
C-SEAL
METAL
PLUG
SEAL(1) VALVE PLUG
FLOW DOWN
C-SEAL
METAL
PLUG
NOTES: SEAL(1)
1. REVERSE THE ORIENTATION OF THE C-SEAL PLUG SEAL FOR
PROPER SHUTOFF WHEN VALVE IS USED IN A PROCESS WITH
DIFFERENT FLUID FLOW DIRECTION.
FLOW UP
A6869 / IL
11
Bulletin 51.2:EH
Table 3. Available Globe Valve Configurations and Valve Sizes (1) (1-1/2 x 1 through 6-Inch Globe Valves)
AVAILABLE CONFIGURATIONS VALVE SIZES (INCHES) AND CLASS RATING
Valve Valve Plug Cage 1-1/2 x 1, 2 x 1 3x2 3, 4 x 3 4, 6 x 4 6, 8 x 6
Design Style Style 1500 2500 1500 2500 2500 2500 2500
Micro-Form Quick-Opening(2) X X X X --- --- ---
Standard(3) --- --- --- X X X X
Table 4. Available Angle Valve Configurations and Valve Sizes (3- through 8-Inch Angle Valves)
AVAILABLE CONFIGURATIONS VALVE SIZES (INCHES) AND CLASS RATING
Valve Valve Plug Cage 3 4 6 8
Design Style Style 1500 1500 1500 1500
Micro-Form Quick-Opening(1) X --- --- ---
Micro-Flute Quick-Opening --- --- --- ---
Standard(2) X X X X
EHAS
Whisper Trim III X X X X
Standard
Cavitrol III: 2-stage --- --- --- ---
3-stage --- --- --- ---
Standard(2) X X X X
Whisper Trim III X X X X
EHAT Standard
Cavitrol III: 2-stage X X X X
3-stage X X X X
Standard(2) X X X X
EHAD Standard
Whisper Trim III X X X X
X—Indicates available construction.
1. Linear cage used on 2 and 3 inch valve sizes.
2. Standard cages are equal percentage, modified equal percentage, and linear cages.
Table 5. Globe Valve Sizes and End Connection Styles (1) (1-1/2 x 1 through 6-Inch Globe Valves)
VALVE CLASS 1500(2) CLASS 2500(2)
SIZE, BWE BWE
INCHES SWE RTJ RF SWE RTJ RF
SCH 80 SCH 160 SCH 80 SCH 160 SCH XXS
1-1/2 x 1 X X X X X X --- X X X X
2x1 X X X X X X --- X X X X
3x2 X X --- X X X --- X --- X X
3 --- --- --- --- --- X --- X --- X X
4x3 --- --- --- --- --- X --- X --- X X
4 --- --- --- --- --- X --- X --- X X
6x4 --- --- --- --- --- X --- X --- X X
6 --- --- --- --- --- X --- X --- X X
8x6 --- --- --- --- --- X X --- --- X X
X—Indicates available construction.
1. DIN (or other) ratings and end connections can usually be supplied; consult your Fisher Controls sales office.
2. For valve ratings of EH Series valves with BWE connections, refer to separate bulletin. Increased Pressure/Temperature Ratings for EH Series and EW Series Steel Valves.
12
Bulletin 51.2:EH
Table 6. Angle Valve Sizes and End Connection Styles (1) (3- through 8-Inch Angle Valves)
VALVE CLASS 900 CLASS 1500
SIZE, BWE
INCHES RF RTJ SWE RTJ RF
SCH 80 SCH 160 SCH XXS
3 X X X X --- --- X X
4 X X X X --- --- X X
6 X X X X --- --- X X
8 X X X --- X --- X X
X—Indicates available construction.
1. DIN (or other) ratings and end connections can usually be supplied; consult your Fisher Controls sales office.
Table 7. Increased Pressure/Temperature Ratings for Steel Table 8. Increased Pressure/Temperature Ratings for Steel
EH Series Globe Valves with Buttwelding End Angle Valves with Buttwelding End Connections
Connections (1) (3- through 8-Inch Angle Valves)
VALVE CLASS 1500 CLASS 2500 CLASS 1500
VALVE SIZE
SIZE,
SIZE, Intermediate Rating Intermediate Rating Intermediate Rating
INCHES
INCHES (ASME B16.34) (ASME B16.34) (ASME B16.34)
1 --- 3862(2) 3 1508
1-1/2 x 1 1789 3021 4 1569
2 --- 3273 6 1804
3 1756 2932 8 1860
4 2083 3294
6 1875 2987
8 1866 2943
10 1566 2522
12 1650 2940
14 1650 2753
1. See bulletin 59.1:026 for additional information.
2. Intermediate rating of 4080 is available with special bolting materials in most valve
body materials. Contact your Fisher Controls sales office.
Table 9. Port Diameters, Valve Plug Travel, Yoke Boss Diameters for TSO (Tight Shutoff) Trim
PORT DIAMETER CV REDUCTION
MAX TRAVEL YOKE BOSS SIZE
VALVE TYPE TRIM Nominal Actual TSO AT 100%
mm Inch mm Inch mm Inch mm Inch TRAVEL(1)
CAV III 3–Stage 90 3-9/16
EHT 6-Inch 95.3 3-3/4 111 4-3/8 106 4-3/16 0%
Class 2500 127 5
90 3-9/16 5% (linear)
EHT 6-Inch Std Class 2500 76.2 3 111 4-3/8 106 4-3/16
127 5 5% (equal %)
1. This column lists the percent reduction of published maximum CV of the trim listed in the TRIM column.
13
Bulletin 51.2:EH
Table 10. Shutoff Classifications per ANSI/FCI 70-2
Valve Design Port Diameter, mm (Inches) ANSI Leakage Class
47.6 mm (1-7/8 inch) and smaller II
II—Standard
58.7 mm (2-5/16 inch) to 92.1 mm (3-5/8 inch)
EHD/EHAD III—Optional
III—Standard
111.1 mm (4-3/8 inch) and larger
IV—Optional
Valve
Size, Port Diameter, mm (Inches) Cage Style ANSI Leakage Class
Design EHD Inches
(Class 1500) Eq. %, Mod. Eq. % V to 593_C (1100_F) (for port diameters from
8
177.8 (7) Linear (std. cage) 136.5 through 177.8 mm [5-3/8 through 7-inches]
10
Linear (Whisper III, A1, B3, C3) with optional C-seal trim)
Eq. %, Mod. Eq. %,
4 Linear (std. cage),
73 (2-7/8) Linear (Whisper III, A1, B3, C3)
6x4 V (for port
Linear (Cav III, 2-stage) diameters from 73 through 136.5 mm [2
[2-7/8
7/8
Eq. %, Mod. Eq. %, Linear (std. through 5-3/8 inches] with
Design EHD 6 cage), Linear (Whisper III, A1, optional C-seal trim)
111.1 (4-3/8) B3, C3, D3)
(Class 2500) 8x6
Linear (Cav III, 2- and 3-stage)
8
136.5 (5-3/8) Eq. %, Mod. Eq. %, Linear (std. V to 593_C (1100_F) (for port diameters from
10
cage) Linear (Whisper III,
cage), III A1,
A1 136.5
136 5 through 177.8
177 8 mm [5-3/8 through 7-inches]
12 with optional C-seal trim)
177.8 (7) B3, C3, D3)
14
EHS, EHAS, EHT, EHAT All Cavitrol III V
Std or w/ Micro-Form or IV—Standard,
EHS, EHAS, EHT, EHAT All
w/ Micro-Flute V—Optional
TSO - Optional
TSO is not an ANSI leakage class.
Valves with TSO trim are factory tested to a more
EHT w/ TSO (Tight Shutoff) See table 9 See table 9 stringent Fisher Controls test requirement of no
leakage at time of shipment. Test medium is
water. Specify service ∆P when ordering. Test
procedure is ANSI/FCI Class V test procedure B.
EHT w/ PEEK(1) 47.6 mm (1-7/8 inch) to
All V to 316_C (600_F)
Anti-Extrusion Rings 136.5 mm (5-3/8 inch)
1. PEEK (PolyEtherEtherKetone)
14
Bulletin 51.2:EH
Trim Selection Guidelines for 1-1/2 x 1
through 6-Inch Globe and 3- through
8-Inch Angle Valves
Please refer to the following descriptions as a guide-
line for the selection of appropriate trims:
D Trim 54—Trim 54 is the standard trim for stain- Figure 21. Typical Balanced TSO (Tight Shutoff) Trim
less steel body materials. It should be used where
hard-faced trim is specified. D Trim 57—Trim 57 should be used for boiler feed-
water service when limits exceed those specified for
Trim 54 should not be used in boiler feedwater due to Trim 50.
amine corrosion problems associated with CoCr-A.
Care should be taken when specifying this trim in
small sizes for applications where chlorides are pres-
D Trim 56—Trim 56 should be used for sour gas ent due to stress corrosion cracking problems with
service. S44004 (440C stainless steel).
15
Bulletin 51.2:EH
WCC STEEL VALVES LCC STEEL VALVES CF8M (316 OR 316H ABOVE
538°C [1000°F])
STAINLESS STEEL VALVES
NOTE:
DO NOT EXCEED THE MAXIMUM PRESSURE AND
TEMPERATURE FOR THE CLASS RATING OF THE BODY
MATERIAL AND VALVE SIZE USED. REFER TO TABLE
3 FOR PRESSURE/TEMPERATURE LIMITS OF THE
TRIM USED. INTERMEDIATE CLASS PRESSURE/
TEMPERATURE RATINGS ARE FOUND IN SEPARATE
BULLETIN, INCREASED PRESSURE/TEMPERATURE RATINGS
FOR EH AND EW SERIES STEEL VALVES.
WC9 CHROMEĆMOLY STEEL VALVES
B1960-1* / IL
Figure 22. Pressure/Temperature Limits for Class 900, 1500, and 2500 Valves
(1-1/2 x 1 through 6-Inch Globe and 3- through 8-Inch Angle Valves)
Material Selection Guidelines 3. Select desired materials from tables 11, 12, 13, and
14 and figures 22, 23, 24, and 25. The temperature
Please use these numbered steps as a guideline for capabilities determined from figures 22, 23, 24, and 25
the selection of materials: may be further limited by the temperature capabilities
of materials selected from tables 11, 12, 13, and 14.
Refer to figures 22, 23, 24, and 25 to determine pres-
1. Determine the pressure/temperature rating of the sure drop limits of the body-trim combinations se-
valve size and material required. Inlet pressure and lected.
temperature must always be limited by the applicable
ANSI pressure/temperature rating. Inlet pressure and temperature must always be limited
by the applicable ANSI pressure-temperature rating.
Contact your Fisher Controls sales office for special
2. Select the desired valve style from the Available materials for temperatures exceeding the following
Configurations specification and from the shutoff clas- maximum limits: Design EHD valve [593_C (1100_F)]
sifications listed in table 10. and the Design EHT valve [232_C (450_F)].
16
Bulletin 51.2:EH
Table 11. Trim Material Combinations (1-1/2 x 1 through 6-Inch Globe and 3- through 8-Inch Angle Valves)
OPERATING
SEAT RING TEMPERATURE RANGE SOUR
DESIGNATION VALVE PLUG CAGE SEAT RING
RETAINER Degrees Degrees SERVICE
Celsius Fahrenheit
WITH STANDARD CAGE
S41600 (416 SST)
heat-treated(2)
S17400 (17-4PH
(17 4PH S17400
S44004 (440C SST) S41600
50(1) SST) H1075 heat- H1150 heat-treated –29 to 427 –20 to 800 No
heat-treated for heat-treated
treated electrolized
Micro-Flute valve
plugs
53(3)
N07718
(Design EHD/ S31600 (316 SST) CA28MWV
(Inconel 718)
EHAD and EHS/ with CoCr-A (Alloy 6) (422 SST) CoCr-A 427 to 566 800 to 1050 No
heat-treated
EHAS valves seat and guide ion nitrided
electrolized
only)
S31600 N07718
CF8M (316 SST)
54 with CoCr-A CoCr-A heat-treated –38 to 593 –100 to 1100 No
electrolized
seat and guide electrolized
S17400
S31600
CF8M H1150
56 with CoCr-A CoCr-A(4) –40 to 149 –40 to 300 Yes
ENC heat-treated
seat and guide
electrolized
S17400
57 S17400
S44004 S44004 H1150
(O-ring seat H1075 0 to 232 32 to 450 No
heat-treated heat-treated heat-treated
ring only) heat-treated
electrolized
WITH CAVITROL III TRIM CAGE
S17400
CB7CU-1
S44004 H1150
58(1) H1075 S44004(4) 0 to 232 32 to 450 No
heat-treated heat-treated
heat-treated
electrolized
S17400
S31600 CB7CU-1
H1150
59 with CoCr-A H1150 CoCr-A(4) –40 to 232 –40 to 450 Yes
heat-treated
seat and guide heat-treated
electrolized
WITH WHISPER TRIM III CAGE
S41600
heat-treated
S17400 S17400
CB7CU-1
(17-4H900 SST) S41600 H1150
60 H1075 –29 to 427 –20 to 800 No
heat-treated for heat-treated heat-treated
heat-treated
6-inch Design EH and electrolized
8-inch Design EHA
valves
CA28MWV
ion nitrided
S31600 N00718
61 WC9 ion nitrided CoCr-A –29 to 566 –20 to 1050 No
with CoCr-A heat-treated
for 6-inch Design EH
seat and guide electrolized
and 8-inch Design
EHA valves
S17400
S31600 CB7CU-1
H1150
62 with CoCr-A H1150 CoCr-A(4) –40 to 232 –40 to 450 Yes
heat-treated
seat and guide heat-treated
electrolized
1. Recommended for boiler feedwater service due to amine problems when using Alloy 6.
2. 17-4H900 stainless steel heat-treated is used when a diverter cone valve plug is specified for port diameters equal to and larger than 4-3/8 inches.
3. This trim designation not available with the O-ring seat ring gasket construction due to temperature limitations.
4. This trim designation uses the O-ring seat ring gasket construction. See table 13 for O-ring temperature limits.
17
Bulletin 51.2:EH
Table 12. Trim Material Combinations (8- through 14-Inch Design EHD and EHT)
OPERATING
TRIM VALVE PLUG SEAT RING TEMPERATURE RANGE
VALVE PLUG CAGE SEAT RING
DESIGNATION STEM CAP SCREWS
_C _F
Design EHD and EHT Valve with Standard Cage
S17400
S42000 S31600 S17400
75 CA6NM (17-4PH SST) –29 to 427 –20 to 800
(420 SST) (316 SST) (17-4 NACE)
H1075 heat-treated
S31600 S20910
S31600 S31600 S66286
77 with CoCr-A (alloy 6) (Nitronic 50) –198 to 427 –325 to 800
electrolized with CoCr-A seat (660 SST)
seat and guide SST(1)
S31600 with CoCr-A S20910 S31600 S31600 with
78 S66286 427 to 593 800 to 1100
seat and guide electrolized(1) electrolized CoCr-A seat
N06600
S31600 with CoCr-A CA6NM N07718
79 S20910 (Inconel 600) –101 to 427 –150 to 800
seat and guide electrolized (Inconel 718)
with CoCr-A seat
S31600 with CoCr-A S20910 CA6NM N06600
80 N07718 427 to 566 800 to 1050
seat and guide electrolized(1) electrolized with CoCr-A seat
Design EHD and EHT Valve with Standard Cage for Sour Gas Service
S31600 with CoCr-A S31600 N06600
82(2) S20910 N07718 –29 to 149 –20 to 300
seat and guide ENC with CoCr-A seat
All Valves with Whisper Trim III Cages
S41000
F22 with CoCr-A WC9/Ion N06600
95 (410 SST) N07718 –29 to 566 –20 to 1050
seat and guide nitrided with CoCr-A seat
heat treated
S17400 with CoCr-A S17400 CB7CU-1 S17400 S17400
96 –62 to 427 –80 to 800
seat and guide (17-4 NACE) H1075 with CoCr-A seat (17-4 NACE)
All Valves with Whisper Trim III Cages for Sour Gas Service
S17400
S17400 with CoCr-A S17400 S17400 S17400
97 H1150 –157 to 343 –250 to 650
seat and guide (17-4 NACE) with CoCr-A seat (17-4 NACE)
NACE/ENC
1. Available with 50.8 mm (2-inch) valve stem connector only.
2. This trim designation is available with O-ring seat ring gasket construction only.
18
Bulletin 51.2:EH
Table 13. Construction Materials and Temperature Capabilities for Parts Other than Body and Trim
(1-1/2 x 1 through 6-Inch Globe and 3- through 8-Inch Angle Valves)
TEMPERATURE CAPABILITIES
PART MATERIAL
Degrees Celsius Degrees Fahrenheit
S31600 (316 stainless steel) –198 to 427 –325 to 800
S31600 (chromium coating) 427 to 593 800 to 1100
Valve plug stem
S20910 (Nitronic 50 stainless steel)(1) –198 to 427 –325 to 800
S20910 (chromium coating) 427 to 593 800 to 1100
–254 to 427 (to 482 for –425 to 800 (to 900 for
Graphite (FMS 17F27)
Design EHD/EHAD nonoxidizing service) nonoxidizing service)
piston ring –254 to 537 (to 593 for –425 to 1000 (to 1100 for
Graphite (FMS 17F39)
nonoxidizing service) nonoxidizing service)
Design EHT/EHAT
N10276 (Hastelloy C) with glass and moly-filled PTFE –73 to 232 –100 to 450
seal ring
Design EHT/EHAT
Same as base material of valve plug See table 11 See table 11
seal ring backup ring
Backup ring S41600 (416 SST) –29 to 427 –20 to 800
Spring-load S30200 (302 SST)
Retaining ring –254 to 593 –425 to 1100
ed Design N07750 (Inconel X750)(1)
EHT valve Seal ring PTFE with Hastelloy C Spring –73 to 232(7) –100 to 450(7)
plug
l seall Anti-extrusion
PEEK (PolyEtherEtherKetone) - - -(8) - - -(8)
ring
N04400 (silver-plated Monel) –254 to 593 –425 to 1100
Cage gasket(1)
N04400 (tin-plated Monel) –29 to 149 –20 to 300
O-ring Nitrile(5) –29 to 107 –20 to 225
seat ring Ethylene-propylene(6) –40 to 232 –40 to 450
S g
Seat ring k (1)
gasket Fluoroelastomer (not for water or steam service)(5) –23 to 204 –10 to 400
gasket
k t Flat sheet
–254 to 427 (to 593 for –425 to 800 (to 1100 for
seat ring Graphite/stainless steel laminate
nonoxidizing service) nonoxidizing service)
gasket
–29 to 427 (WCC & WC9) –20 to 800 (WCC & WC9)
Studs Steel SA193-B7 (all body materials) -46 to 343 (LCC) -50 to 650 (LCC)
Nuts Steel SA194-2H (all body materials) –46 to 232 (CF8M [316 & –50 to 450 (CF8M [316 &
316H]) 316H])
Studs Steel SA193-B7 (WC9 body mat’l)
–29 to 593 –20 to 1100
Nuts Steel SA194-7 (WC9 body mat’l)
Studs Steel SA193-B16 (WC9 body mat’ls)
–29 to 593 (WC9) –20 to 1100 (WC9)
Nuts Steel SA194-7 (WC9 body mat’ls)
Studs 304 stainless steel SA320-B8 (CF8M [316 & 316H body mat’ls])
–198 to 38 –325 to 100
Body to
Body-to- Nuts 304 stainless steel SA194-8 (CF8M [316 & 316H body mat’ls])
bonnet Studs 316 stainless steel SA193-B8M(3) (CF8M [316 & 316H body
bolting(2) mat’l]) –198 to 537 –325 to 1000
Nuts 316 stainless steel SA194-8M (CF8M [316 & 316H body mat’l])
Studs 316 stainless steel SA193-B8M electrolized(4) (CF8M [316 & 316H
body mat’ls]) –198 to 593 –325 to 1100
Nuts 316 stainless steel SA194-8M (CF8M [316 & 316H body mat’ls])
Studs Stainless steel SA453-660 Class A (CF8M [316 & 316H body
mat’ls]) –29 to 537 –20 to 1000
Nuts Steel SA194-7 (CF8M [316 & 316H body mat’ls])
Studs Steel SA193-B7M for sour gas(1) (CF8M [316 body mat’l])
–46 to 232 –50 to 450
Nuts Steel SA194-2HM for sour gas(1) (CF8M [316 body mat’l])
PTFE V-ring –40 to 232 –40 to 450
Graphite ribbon/filament (oxidizing service to 700_F) –254 to 537 –425 to 1000
Graphite ribbon (high-temperature oxidizing service) 371 to 593 700 to 1100
Packing
HIGH-SEAL packing system (see Fisher Controls Bulletin
59.1:061, ENVIRO-SEAL and HIGH-SEAL Packing Systems See bulletin 59.1:061 See bulletin 59.1:061
for Sliding-Stem Valves, for further information)
Packing follower, spring, or
S31600 –254 to 593 –425 to 1100
lantern ring
Packing box ring S31600 –254 to 593 –425 to 1100
Packing flange, studs, or Steel –29 to 427 –20 to 800
nuts S31600 –29 to 593 –20 to 1100
1. Complies with National Association of Corrosion Engineers (MR0175).
2. Valve body materials with which these bolting materials may be used are shown in parentheses.
3. Class 1 (annealed).
4. Class 2 (strain hardened).
5. For use with all O-ring seat ring constructions without Cavitrol III trim.
6. For use with all O-ring seat ring constructions with Cavitrol III trim.
7. If used with PEEK anti-extrusion rings, PTFE/carbon seal ring may be used in temperatures up to 600_F (316_C) for non-oxidizing service or up to 260_C (500_F) for oxidizing
service.
8. These materials are not limiting factors.
19
Bulletin 51.2:EH
Table 14. Construction Materials and Temperature Capabilities for Parts Other than Body and Trim
(8- through 14-Inch Design EHD and EHT)
TEMPERATURE CAPABILITIES
PART MATERIAL
_C _F
Cage gasket Silver-plated N04400 (Monel) –254 to 593 –425 to 1100
Metal seat ring gasket Graphite filled spiral wound Inconel –254 to 593 –425 to 1100
Standard gasket
Nitrile –29 to 107 –20 to 225
construction
ring seat ring gasket Ethylene-propylene
O-ring
O –40 to 232 –40 to 450
Fluoroelastomer –23 to 204 –10 to 400
Cage gasket Tin-plated N04400 –29 to 149 –20 to 300
Sour gas gasket
Nitrile –29 to 107 –20 to 225
construction O ring seat ring gasket
O-ring
Fluoroelastomer –23 to 149 –10 to 300
–46 to 427 –50 to 800
(to 482 for (to 900 for
Graphite (FMS 17F27)
nonoxidizing nonoxidizing
service service)
Design EHD piston ring
–46 to 537 –50 to 1000
(to 593 for (to 1100 for
Graphite (FMS 17F39)
nonoxidizing nonoxidizing
service) service)
Design EHT seal ring R30003 (Elgiloy with glass and moly-filled PTFE –73 to 232 –100 to 450
Design EHT seal ring retaining ring S30200 (302 stainless steel) –254 to 593 –425 to 1100
Backup ring S41600 (416 SST) –29 to 427 –20 to 800
Spring-loaded Retaining ring S30200 (302 SST) –254 to 593 –425 to 1100
Design EHT valve
Seal ring PTFE with Hastelloy C Spring –73 to 232(3) –100 to 450(3)
plug seal
Anti-extrusion rings PEEK (PolyEtherEtherKetone) - - -(4) - - -(4)
PTFE V-ring –46 to 232 –50 to 450
PTFE/composition –73 to 232 –100 to 450
0 to 700 (to 1000
–18 to 371 (to 538 for
Graphite ribbon filament for nonoxidizing
nonoxidizing service)
Packing service)
Graphite Ribbon
371 to 649 700 to 1200
(high temperature oxidizing service)
HIGH-SEAL (see Bulletin 59.1:061, HIGH-SEAL Packing Systems for Sliding-Stem Valves for
information)
Packing follower, spring, or lantern ring S31600 (316 stainless steel) –254 to 593 –425 to 1100
S17400 –101 to 427 –150 to 800
Packing box ring
S31600 –254 to 593 –425 to 1100
-Continued-
20
Bulletin 51.2:EH
Table 14. Construction Materials and Temperature Capabilities for Parts Other than Body and Trim
(8- through 14-Inch Design EHD and EHT) (Continued)
TEMPERATURE CAPABILITIES
PART MATERIAL
_C _F
–29 to 427 –20 to 800
Studs Steel SA 193-B7
(steel bodies) (steel bodies)
All body materials
–46 to 232 –50 to 450
Nuts Steel SA 194-2H
(SST bodies) (SST bodies)
Studs Steel SA 193-B7 WC9 & C5
–29
29 to 537 –20
20 to 1000
Nuts Steel SA 194-7 body materials
Studs Steel SA 193-B16 WC9 & C5
29 to 593
–29 20 to 1100
–20
Nuts Steel SA 194-7 body materials
304 Stainless steel
Studs
SA320-B8 CF8M (316 SST)
–198
198 to 38 –325
325 to 100
316 stainless steel body materials
Nuts
SA194-8
316 stainless steel
Studs
SA193-B8M(2) CF8M & CF8M (316H)
Body-to-bonnet
Body to bonnet –198
198 to 537 –325
325 to 1000
316 stainless steel body materials
bolting(1) Nuts
SA194-8M
316 stainless steel
Studs
SA194-B8M
CF8M body materials –198
198 to 427 –325
325 to 800
316 stainless steel
Nuts
SA194-B8
316 stainless steel
Studs
SA194-B8M electrolized(2)
CF8M body materials 427 to 649 801 to 1200
316 stainless steel
Nuts
SA194-B8
Studs Steel SA 193-B7M For sour gas service –46
46 to 232 –50
50 to 450
Nuts Steel SA 194-2HM CF8M body material (SST bodies) (SST bodies)
Stainless Steel SA453-660
Studs CF8M
Class A –29
29 to 537 –20
20 to 1000
body materials
Nuts Steel SA 194-7
1. Valve body materials with which these bolting materials may be used are shown in parentheses.
2. Class 1 (annealed).
3. If used with PEEK anti-extrusion rings, PTFE/carbon seal ring may be used in temperatures up to 316_C (600_F) for non-oxidizing service or up to 260_C (500_F) for oxidizing
service.
4. These materials are not limiting factors.
Table 15. Valve Plug Travel (1) (8- through 14-Inch Valves)
DESIGN EHD, EHT
CAGE Valve Size, Inches
CLASS
STYLE 8, 10 12, 14
mm Inches mm Inches
1500 76 3 102 4
Linear
2500 64 2-1/2 76 3
1500 76 3 102 4
Equal Percentage(1)
2500 64 2-1/2 76 3
1500 89 3-1/2 114 4-1/2
Modified Equal Percentage(1)
2500 76 3 89 3-1/2
1500 178 7 184 7-1/4
Whisper Trim III Cage
2500 146 5-3/4 178 7
1. Valves using an equal percentage cage may be travelled an additional 13 mm
(1/2-inch) if desired to obtain additional capacity; flow characteristic becomes modified
equal percentage.
21
Bulletin 51.2:EH
Flowing Pressure Drops Limits for 6-Inch EHD/EHT and 8-Inch EHAD/EHAT Valves (Without Cavitrol III or Whisper Trim III)
MAXIMUM FLOWING PRESSURE DROP
VALVE FLOW PSI Bar
STEM SIZE, mm (INCHES)
CLASS MEDIA Flowing Flowing up with Flowing Flowing up with
Down Diverter Cone Down Diverter Cone
19.1 mm (3/4-inch) 1000 --- 69 ---
All except
exce t boiler 50.8 mm (1-inch) 1000 --- 69 ---
feedwater 31.7 mm (1-1/4 inch) 2000 --- 138 ---
CL1500
50.8 x 31.7 mm(1) (2 x 1-1/4 inch(1)) 3000 3750 207 259
31.7 mm (1-1/4 inch) 1000 --- 69 ---
Boiler feedwater
50.8 x 31.7 mm(1) (2 x 1-1/4 inch(1)) 2000 3750 138 259
19.1 mm (3/4-inch) 1000 --- 69 ---
All except boiler
50.8 mm (1-inch) 1000 --- 69 ---
CL2500 feedwater
31.7 mm (1-1/4 inch) 2000 6250 138 431
Boiler feedwater 31.7 mm (1-1/4 inch) 1000 6250 69 431
1. 31.7 mm (1-1/4 inch) Nitronic 50 stem with 50.8 mm (2-inch) plug to stem connection.
22
Bulletin 51.2:EH
FLUID TEMPERATURE,
_C
FLUID TEMPERATURE, _F
WCB STEEL VALVES
FLUID TEMPERATURE, FLUID TEMPERATURE,
_C _C
PRESSURE DROP, BAR
B1959-1 / IL
Figure 24. Pressure-Temperature Limits for Class 1500 and 2500 Valves (8- through 14-Inch Valves)
23
Bulletin 51.2:EH
Flowing Pressure Drops Limits for EHD and EHT Valves (Without Cavitrol III or Whisper Trim III) (8- to 14-Inch Valves)
VALVE STEM CONNECTOR SIZE MAXIMUM FLOWING PRESSURE DROP(1) BAR (PSID)
FLOW MEDIA
mm (inch) Flowing Down Flowing Up with Diverter Cone
All except boiler 50.8 mm 138 259
feedwater (2-inch) (2000) (3750)
Boiler 50.8 mm 69 259
feedwater (2-Inch) (1000) (3750)
1. Do not exceed figure 25 material combination pressure drop limits.
ALL GASKET CONSTRUCTIONS ALL GASKET CONSTRUCTIONS CLASS 2500 VALVE WITH
SPIRAL WOUND GASKET CONSTRUCTION
FLUID TEMPERATURE, FLUID TEMPERATURE,
_C _C
PRESSURE DROP, BAR, DIFFERENTIAL
PRESSURE DROP, BAR, DIFFERENTIAL
NOTES:
1. FOR RECOMMENDED SERVICE APPLICATIONS,
SEE TABLE SHOWN.
Figure 25. Pressure-Temperature Limits for Trim Material Combinations on Class 1500 and 2500 Valves (8- to 14-Inch Valves)
24
Bulletin 51.2:EH
Table 16. Additional Globe Valve Specifications (1-1/2 x 1 through 6-Inch Globe Valves)
VALVE PORT VALVE PLUG
VALVE DESIGN VALVE STEM DIAMETER
SIZE, CLASS FLOW CHARACTERISTIC DIAMETER TRAVEL
AND PLUG STYLE
INCHES mm Inches mm Inches mm Inches
6.4 1/4 19 3/4 12.7 1/2
EHS w/Micro-Flute 9.5 3/8 19 3/4 12.7 1/2
12.7 1/2 19 3/4 12.7 1/2
Equal percentage 6.4 1/4 19 3/4 12.7 1/2
12.7 1/2 19 3/4 12.7 1/2
EHS w/Micro-Form
1500 19.1 3/4 19 3/4 12.7, 19.1 1/2, 3/4
25.4 1 19 3/4 12.7, 19.1 1/2, 3/4
12.7 1/2 22 7/8 12.7 1/2
Modified equal percentage EHS w/Micro-Form 19.1 3/4 22 7/8 12.7, 19.1 1/2, 3/4
25.4 1 22 7/8 12.7, 19.1 1/2, 3/4
1-1/2 x 1, Linear (Cavitrol III, 2-stage) EHS 22.2 7/8 38 1-1/2 12.7, 19.1 1/2, 3/4
2x1 6.4 1/4 19 3/4 12.7 1/2
EHS w/Micro-Flute 9.5 3/8 19 3/4 12.7 1/2
12.7 1/2 19 3/4 12.7 1/2
Equal percentage
6.4 1/4 19 3/4 12.7 1/2
EHS w/Micro-Form 12.7 1/2 19 3/4 12.7, 19.1 1/2, 3/4
2500 19.1 3/4 19 3/4 12.7, 19.1 1/2, 3/4
12.7 1/2 22 7/8 12.7, 19.1 1/2, 3/4
EHS w/Micro-Form
19.1 3/4 22 7/8 12.7, 19.1 1/2, 3/4
Modified equal percentage
9.5 3/8 22 3/4 12.7 1/2
EHS w/Micro-Flute
12.7 1/2 22 3/4 12.7 1/2
Linear (Cavitrol III, 2-stage) EHS 15.9 5/8 32 1-1/4 12.7, 19.1 1/2, 3/4
31.8 1-1/4 19 3/4 12.7, 19.1, 25.4 1/2, 3/4, 1
EHS w/Micro-Form
Equal percentage
ercentage 38.1 1-1/2 29 1-1/8 12.7, 19.1, 25.4 1/2, 3/4, 1
EHS, EHD, EHT 47.6 1-7/8 29 1-1/8 12.7, 19.1, 25.4(1) 1/2, 3/4, 1(1)
Linear (cage style: Std)
Linear (cage style: Whisper EHS, EHD, EHT 47.6 1-7/8 38 1-1/2 12.7, 19.1, 25.4(1) 1/2, 3/4, 1(1)
1500 Trim III, level A1)
31.8 1-1/4 25 1 12.7, 19.1, 25.4 1/2, 3/4, 1
EHS w/Micro-Form
Modified equal percentage
ercentage 38.1 1-1/2 38 1-1/2 12.7, 19.1, 25.4 1/2, 3/4, 1
EHS, EHD, EHT 47.6 1-7/8 38 1-1/2 12.7, 19.1, 25.4(1) 1/2, 3/4, 1(1)
Linear (Cavitrol III, 2-stage) EHT 44.5 1-3/4 51 2 12.7, 19.1 1/2, 3/4
3x2 Linear (Cavitrol III, 3-stage) EHT 25.4 1 51 2 12.7, 19.1 1/2, 3/4
EHS w/Micro-Form 25.4 1 22 7/8 12.7, 19.1, 25.4 1/2, 3/4, 1
Equal percentage
EHS, EHD, EHT 38.1 1-1/2 22 7/8 12.7, 19.1(1), 25.4(1) 1/2, 3/4(1), 1(1)
Linear (cage style: Whisper
EHS, EHD, EHT 38.1 1-1/2 38 1-1/2 12.7, 19.1(1), 25.4(1) 1/2, 3/4(1), 1(1)
Trim III, level A1)
2500 Linear EHS, EHD, EHT 38.1 1-1/2 29 1-1/8 12.7, 19.1, 25.4 1/2, 3/4, 1
EHS w/Micro-Form 25.4 1 29 1-1/8 12.7, 19.1, 25.4 1/2, 3/4, 1
Modified equal percentage
EHS, EHD, EHT 38.1 1-1/2 29 1-1/8 12.7, 19.1(1), 25.4(1) 1/2, 3/4(1), 1(1)
Linear (Cavitrol III, 2-stage) EHT 31.8 1-1/4 51 2 12.7, 19.1 1/2, 3/4
Linear (Cavitrol III, 3-stage) EHS 15.9 5/8 51 2 12.7, 19.1 1/2, 3/4
Equal percentage EHS, EHD, EHT 58.7 2-5/16 29 1-1/8 12.7, 19.1, 25.4 1/2, 3/4, 1
Modified equal percentage
3, Linear (cage style: Whisper EHS, EHD, EHT 58.7 2-5/16 38 1-1/2 12.7, 19.1, 25.4 1/2, 3/4, 1
2500
4x3 Trim III, level A1, B1)
Linear (Cavitrol III, 3-stage) EHT 33.3 1-5/16 64 2-1/2 12.7, 19.1 25.4 1/2, 3/4, 1
Linear (Cavitrol III, 2-stage) EHT 47.6 1-7/8 64 2-1/2 12.7, 19.1 25.4 1/2, 3/4, 1
Equal percentage EHS, EHD, EHT 73 2-7/8 38 1-1/2 19.1, 25.4 3/4, 1
Modified equal percentage
4, Linear (cage style: Whisper EHS, EHD, EHT 73 2-7/8 51 2 19.1, 25.4 3/4, 1
2500
6x4 Trim III, level A1, B1, B3)
Linear (Cavitrol III, 3-stage) EHT 58.7 2-5/16 70 2-3/4 19.1, 25.4 3/4, 1
Linear (Cavitrol III, 2-stage) EHT 73 2-7/8 70 2-3/4 19.1, 25.4 3/4, 1
-Continued-
25
Bulletin 51.2:EH
Table 16. Additional Globe Valve Specifications (1-1/2 x 1 through 6-Inch Globe Valves) (Continued)
VALVE PORT VALVE PLUG
VALVE DESIGN VALVE STEM DIAMETER
SIZE, CLASS FLOW CHARACTERISTIC DIAMETER TRAVEL
AND PLUG STYLE
INCHES mm Inches mm Inches mm Inches
Equal percentage EHS, EHD, EHT 111.1 4-3/8 51 2 19.1, 25.4, 31.8 3/4, 1, 1-1/4
Modified equal percentage EHS, EHD, EHT 111.1 4-3/8 76 3 19.1, 25.4, 31.8 3/4, 1, 1-1/4
6, Linear (cage style: Whisper
2500 EHS, EHD, EHT 111.1 4-3/8 76 3 25.4, 31.8 1, 1-1/4
8x6 Trim III, level B3, C3, D3)
Linear (cage style: Cavitrol III,
EHT 111.1 4-3/8 95 3-3/4 19.1, 25.4, 31.8 3/4, 1, 1-1/4
2- and 3-stage)
1. Available only with Design EHS valve body.
Table 17. Additional Angle Valve Specifications (3- through 8-Inch Angle Valves)
VALVE PORT VALVE PLUG
VALVE DESIGN AND VALVE STEM DIAMETER
SIZE, CLASS FLOW CHARACTERISTIC DIAMETER TRAVEL
PLUG STYLE
INCHES mm Inches mm Inches mm Inches
31.8 1-1/4 19 3/4 12.7, 19.1, 25.4 1/2, 3/4, 1
EHAS w/Micro-Form
Equal percentage
ercentage 38.1 1-1/2 29 1-1/8 12.7, 19.1, 25.4 1/2, 3/4, 1
EHAS, EHAD, EHAT 47.6 1-7/8 29 1-1/8 12.7, 19.1, 25.4(1) 1/2, 3/4, 1(1)
31.8 1-1/4 25 1 12.7, 19.1, 25.4 1/2, 3/4, 1
EHAS w/Micro-Form
Modified equal percentage
ercentage 38.1 1-1/2 38 1-1/2 12.7, 19.1, 25.4 1/2, 3/4, 1
EHAS, EHAD, EHAT 47.6 1-7/8 38 1-1/2 12.7, 19.1, 25.4(1) 1/2, 3/4, 1(1)
3 1500
Linear (cage style: Whisper
EHAS, EHAD, EHAT 47.6 1-7/8 38 1-1/2 12.7, 19.1, 25.4(1) 1/2, 3/4, 1(1)
Trim III, level A1)
Linear (cage style: Cavitrol
EHAT 44.5 1-3/4 51 2 12.7, 19.1 1/2, 3/4
III, 2-stage)
Linear (cage style: Cavitrol
EHAT 25.4 1 51 2 12.7, 19.1 1/2, 3/4
III, 3-stage)
Equal percentage EHAS, EHAD, EHAT 73 2-7/8 38 1-1/2 12.7, 19.1, 25.4 1/2, 3/4, 1
Modified equal percentage
Linear (cage style: Whisper EHAS, EHAD, EHAT 73 2-7/8 51 2 12.7, 19.1, 25.4 1/2, 3/4, 1
Trim III, level A1, B1)
4 1500
Linear (cage style: Cavitrol
EHAT 47.6 1-7/8 64 2-1/2 12.7, 19.1, 25.4 1/2, 3/4, 1
III, 3-stage)
Linear (cage style: Cavitrol
EHAT 64 2-1/2 64 2-1/2 12.7, 19.1, 25.4 1/2, 3/4, 1
III, 2-stage)
Equal percentage EHAS, EHAD, EHAT 92.1 3-5/8 38 1-1/2 19.1, 25.4 3/4, 1
Modified equal percentage
Linear (cage style: Whisper EHAS, EHAD, EHAT 92.1 3-5/8 51 2 19.1, 25.4 3/4, 1
Trim III, level A1, B3, C3)
6 1500 Linear (cage style: Whisper
EHAS, EHAD, EHAT 73 2-7/8 51 2 19.1, 25.4 3/4, 1
Trim III, level D3)
Linear (cage style: Cavitrol
EHAT 73 2-7/8 76 3 19.1, 25.4 3/4, 1
III, 3-stage)
Linear (cage style: Cavitrol
EHAT 87.3 3-7/16 76 3 19.1, 25.4 3/4, 1
III, 2-stage)
Equal percentage EHAS, EHAD, EHAT 136.5 5-3/8 64 2-1/2 19.1, 25.4, 31.8 3/4, 1, 1-1/4
Modified equal percentage EHAS, EHAD, EHAT 136.5 5-3/8 76 3 19.1, 25.4, 31.8 3/4, 1, 1-1/4
Linear (cage style: Whisper
EHAS, EHAD, EHAT 136.5 5-3/8 76 3 25.4, 31.8 1, 1-1/4
Trim III, level A1, B3, C3)
8 1500 Linear (cage style: Whisper
EHAS, EHAD, EHAT 111.1 4-3/8 76 3 19.1, 25.4, 31.8 3/4, 1, 1-1/4
Trim III, level D3)
Linear (cage style: Cavitrol
EHAT 115.9 4-9/16 102 4 19.1, 25.4, 31.8 3/4, 1, 1-1/4
III, 3-stage)
Linear (cage style: Cavitrol
EHAT 133.4 5-1/4 102 4 19.1, 25.4, 31.8 3/4, 1, 1-1/4
III, 2-stage)
1. Available only with Design EHAS valve body.
26
Bulletin 51.2:EH
Table 18. Globe Valve Yoke Boss and Valve Stem Diameter Combinations (1) (1-1/2 x 1 through 6-Inch Globe Valves)
STANDARD DIAMETERS OPTIONAL DIAMETERS
VALVE SIZE
SIZE,
mm Inches mm Inches
INCHES
Stem Yoke Boss Stem Yoke Boss Stem Yoke Boss Stem Yoke Boss
1-1/2 x 1, 2 x 1 1/2 2-13/16 12.7 71 3/4 3-9/16 19.1 90
12.7 71 1/2 2-13/16
3x2 25.4 127 1 5
19.1 90 3/4 3-9/16
12.7 71 1/2 2-13/16
3, 4 x 3 19.1 90 3/4 3-9/16
25.4 127 1 5
4, 6 x 4 19.1 90 3/4 3-9/16 25.4 127 1 5
25.4 127 1 5
6, 8 x 6 19.1 90 3/4 3-9/16
31.8 127 1-1/4 5H
1. See table 16 for valve stem diameters available for specific construction.
Table 19. Angle Valve Yoke Boss and Valve Stem Diameter Combinations (1) (3- through 8-Inch Angle Valves)
ANGLE STANDARD DIAMETERS OPTIONAL DIAMETERS
VALVE SIZE, mm Inches mm Inches
INCHES Stem Yoke Boss Stem Yoke Boss Stem Yoke Boss Stem Yoke Boss
19.1 90 3/4 3-9/16
3 12.7 71 1/2 2-13/16
25.4 127 1 5
12.7 71 1/2 2-13/16
4 19.1 90 3/4 3-9/16
25.4 127 1 5
6 19.1 90 3/4 3-9/16 25.4 127 1 5
8 25.4 127 1 5 19.1 90 3/4 3-9/16
1. See table 17 for valve stem diameters available for specific construction.
Table 21. Approximate Weights (Valve Assembly and Bonnet) (8- through 14-Inch Valves)
WEIGHTS
VALVE Class 1500 Class 2500
SIZE,
SIZE
BWE FLG BWE FLG
INCHES
Kilograms Pounds Kilograms Pounds Kilograms Pounds Kilograms Pounds
8 1400 3100 1700 3700 1900 4100 2200 4700
10 1500 3300 1900 4100 2000 4400 --- ---
12 3400 7300 3900 8600 3400 7600 --- ---
14 3400 7300 --- --- 3400 7600 --- ---
27
Bulletin 51.2:EH
A(1)
VALVE SIZE
Class 1500 Class 2500
INCHES
BWE SWE RF RTJ BWE SWE RF RTJ
mm
1-1/2 x 1 292 292 298 298 318 318 337 340
2x1 292 292 311 315 318 318 349 353
3x2 375 --- 403 406 400 --- 435 442
3 --- --- --- --- 498 --- 498 505
4x3 --- --- --- --- 498 --- 518 527
4 --- --- --- --- 575 --- 575 584
6x4 --- --- --- --- 575 --- 660 673
6 --- --- --- --- 819 --- 819 832
8x6 --- --- --- --- 819 --- 857 873
Inches
1-1/2 x 1 11.50 11.50 11.75 11.75 12.50 12.50 13.25 13.38
2x1 11.50 11.50 12.25 12.38 12.50 12.50 13.75 13.88
3x2 14.75 --- 15.88 16.00 15.75 --- 17.12 17.38
3 --- --- --- --- 19.62 --- 19.62 19.88
4x3 --- --- --- --- 19.62 --- 20.38 20.75
4 --- --- --- --- 22.62 --- 22.62 23.00
6x4 --- --- --- --- 22.62 --- 26.00 26.50
6 --- --- --- --- 32.25 --- 32.25 32.75
8x6 --- --- --- --- 32.25 --- 33.75 34.38
1. RF—raised-face flanges; RTJ—ring-type joint flanges; BWE—buttwelding ends; SWE—socketweld ends.
NOTE:
FOR DIMENSIONS OF VALVES WITH DIN
(OR OTHER) END CONNECTIONS,
CONSULT YOUR FISHER CONTROLS
SALES OFFICE.
MATCH LINE
FOR ALL
OTHER
ACTUATORS 25.4
(1.00)
mm
(INCHES)
FLANGED VALVE WITH 71 OR 90 mm BUTTWELDING END VALVE WITH 71 OR 90 127 mm (5ĆINCH) DIAMETER YOKE BOSS
(2Ć13/16 OR 3Ć9/16 INCH) DIAMETER YOKE mm (2Ć13/16 OR 3Ć9/16 INCH) FOR USE WITH FLANGED OR
BOSS DIAMETER YOKE BOSS BUTTWELDING VALVE
A2719-4 / IL
Figure 26. 1-1/2 x 1 through 6-Inch Globe Valve Dimensions with Standard Bonnet
28
Bulletin 51.2:EH
B(1)
VALVE SIZE
Class 1500 Class 2500
INCHES
BWE SWE RF RTJ BWE SWE RF RTJ
mm
1-1/2 x 1 146 146 149 149 159 159 168 170
2x1 146 146 155 157 159 159 175 176
3x2 173 --- 191 192 200 --- 217 221
3 --- --- --- --- 249 --- 249 253
4x3 --- --- --- --- 249 --- 259 264
4 --- --- --- --- 273 --- 273 278
6x4 --- --- --- --- 273 --- 325 331
6 --- --- --- --- 397 --- 397 403
8x6 --- --- --- --- 397 --- 416 424
Inches
1-1/2 x 1 5.75 5.75 5.88 5.88 6.25 6.25 6.62 6.69
2x1 5.75 5.75 6.12 6.19 6.25 6.25 6.88 6.94
3x2 6.81 --- 7.50 7.56 7.88 --- 8.56 8.69
3 --- --- --- --- 9.81 --- 9.81 9.94
4x3 --- --- --- --- 9.81 --- 10.19 10.38
4 --- --- --- --- 10.75 --- 10.75 10.94
6x4 --- --- --- --- 10.75 --- 12.81 13.06
6 --- --- --- --- 15.62 --- 15.62 15.88
8x6 --- --- --- --- 15.62 --- 16.38 16.69
1. RF—raised-face flanges; RTJ—ring-type joint flanges; BWE—buttwelding ends; SWE—socketweld ends.
G D
VALVE Class 1500 Class 2500
SIZE Class Class
INCHES Yoke Boss Diameters, mm (Inches)
1500 2500
71 (2-13/16) 90 (3-9/16) 127 (5) 71 (2-13/16) 90 (3-9/16) 127 (5)
mm
1-1/2 x 1 76 78 267 273 --- 249 256 ---
2x1 76 78 267 273 --- 249 256 ---
3x2 109 108 259 265 329 303 310 343
3 --- 145 --- --- --- 335 335 371
4x3 --- 145 --- --- --- 335 335 371
4 --- 168 --- --- --- --- 348 406
6x4 --- 168 --- --- --- --- 348 406
6 --- 229 --- --- --- --- 408 445
8x6 --- 229 --- --- --- --- 408 445
Inches
1-1/2 x 1 3.00 3.06 10.50 10.75 --- 9.81 10.06 ---
2x1 3.00 3.06 10.50 10.75 --- 9.81 10.06 ---
3x2 4.31 4.35 10.19 10.44 12.94 11.94 12.19 13.50
3 --- 5.69 --- --- --- 13.19 13.19 14.62
4x3 --- 5.69 --- --- --- 13.19 13.19 14.62
4 --- 6.62 --- --- --- --- 13.69 16.00
6x4 --- 6.62 --- --- --- --- 13.69 16.00
6 --- 9.00 --- --- --- --- 16.06 17.50
8x6 --- 9.00 --- --- --- --- 16.06 17.50
Figure 26. 1-1/2 x 1 through 6-Inch Globe Valve Dimensions with Standard Bonnet (Continued)
29
Bulletin 51.2:EH
GLOBE D
VALVE SIZE, CLASS Yoke Boss Diameter, Inches (mm)
INCHES 2-13/16 (71) 3-9/16 (90) 5 (127)
mm
1500
1-1/2 x 1 &
& 391 406 ---
2x1
2500
MATCH LINE 1500
FOR ACTUATOR 3x2 & 427 443 502
2500
Inches
1500
1-1/2 x 1 &
& 15.38 16.00 ---
2x1
2500
1500
3x2 & 16.81 17.44 19.75
2500
25.4
(1.00)
FLANGED VALVE WITH STYLE 1
EXTENSION BONNET HAVING 71 OR 90 mm
(2Ć13/16 OR 3Ć9/16 INCH) DIAMETER 127 mm (5ĆINCH) DIAMETER YOKE BOSS
YOKE BOSS FOR STYLE 1 EXTENSION BONNET
18A5906-C
A3002-2 / IL
Figure 27. Dimension D for Style 1 Extension Bonnet (A, B, and G Dimensions Listed in Figure 26
Do Not Change When Extension Bonnet is Used)
Installation
The valve must be installed so flow through the valve orientations may result in shortened trim life and diffi-
matches the flow direction arrow on the valve body. culty with field maintenance.
Consideration should be given to installing an up-
stream strainer, especially if the valve uses a multi-ori- Overall dimensions are shown in figures 26, 27, 28,
fice Whisper Trim III or Cavitrol III cage. 29, and 30. Face-to-face dimensions are in com-
pliance with ANSI/ISA-S75 for valves smaller than
8-inch. For 8-inch and larger valves, face-to-face di-
mensions are longer than industry standards for valves
For 8-inch and larger valves,the recommended instal- of this size and rating. Actual end connection dimen-
lation position is with the valve in a horizontal pipeline sions conform to ASME B16.25 for buttwelding ends
and the actuator vertical above the valve. Other and to ASME B16.5 for flanged ends.
30
Bulletin 51.2:EH
D
A, mm Std. Bonnet Ext. Bonnet
SIZE
Stem Diameter, mm Stem Diameter, mm
BWE SWE RF RTJ 1/2 3/4 1, 1-1/4 1/2 3/4 1
3 235 --- 235 237 259 265 329 427 443 502
4 273 --- 273 275 287 278 338 --- --- ---
6 353 --- 353 356 --- 302 380 --- --- ---
8 416 --- 416 421 --- 367 403 --- --- ---
Inches
3 9.25 --- 9.25 9.31 10.19 10.44 12.94 16.81 17.44 19.75
4 10.75 --- 10.75 10.81 11.31 10.94 13.31 --- --- ---
6 13.88 --- 13.88 14.00 --- 11.88 14.56 --- --- ---
8 16.38 --- 16.38 16.56 --- 14.44 15.88 --- --- ---
10B2281-A
A4172 / IL
Figure 28. 3- through 8-Inch Angle Valve Class 1500 Dimensions with Standard Bonnet and Style 1 Extension Bonnet
31
Bulletin 51.2:EH
VALVE A(1,2)
SIZE, Class 900 Class 1500 Class 2500
INCHES RF RTJ BWE RF RTJ BWE RF RTJ
mm
8 1137 1140 1194 1194 1203 1295 1295 1311
10 1168 1172 1245 1245 1254 1346 --- ---
12 1715 1718 1803 1803 1819 1778 --- ---
14 1727 1739 1829 --- --- 1803 --- ---
Inches
8 44.75 44.88 47.00 47.00 47.38 51.00 51.00 51.62
10 46.00 46.13 49.00 49.00 49.38 53.00 --- ---
12 67.50 67.62 71.00 71.00 71.62 70.00 --- ---
14 68.00 68.38 72.00 --- --- 71.00 --- ---
VALVE B(1,2)
SIZE, Class 900 Class 1500 Class 2500
INCHES BWE RF RTJ BWE RF RTJ
mm
8 429 430 457 457 462 508 508 516
10 445 446 483 483 487 533 --- ---
12 794 795 838 838 846 838 --- ---
14 800 805 851 --- --- 851 --- ---
Inches
8 16.88 16.94 18.00 18.00 18.19 20.00 20.00 20.31
10 17.50 17.56 19.00 19.00 19.19 21.00 --- ---
12 31.25 31.31 33.00 33.00 33.31 33.00 --- ---
14 31.50 31.69 33.50 --- --- 33.50 --- ---
1. Face-to-face dimensions for these valves are not standard dimensions due to the lack of industry standards for valves of this size and rating.
2. BWE—buttwelding ends; RF—raised-face flanges; RTJ—ring-type joint flanges.
MATCH LINE FOR
ACTUATOR
VALVE D G
SIZE, Class 900 Class 900
Class 2500 Class 2500
INCHES and 1500 and 1500 D
mm
8 & 10 684 665 363 370
12 & 14 702 724 452 437
G
Inches MATCH LINE FOR
ACTUATOR
8 & 10 26.94 26.19 14.31 14.56 B
12 & 14 27.62 28.50 17.81 17.19 A
15A4693-C
FLANGED ENDS D
NOTE:
FOR DIMENSIONS OF
VALVES WITH DIN (OR OTHER)
END CONNECTIONS, G
CONSULT YOUR FISHER CONTROLS
SALES OFFICE.
B
A
15A4691-F
Figure 29. Dimensions (8- through 14-Inch Design EHD and EHT Valves)
32
Bulletin 51.2:EH
895
(35.25)
663
(26.12)
1118
(44.00)
1981 $ 3.0 mm
78.00 $ 0.12) (INCH)
A3349/IL
33
Bulletin 51.2:EH
Specifications
Available Configurations 900 and 1500 only
See table 1 Socketweld Ends (SWE): See tables 5 and 6 for
those valve sizes available with socketweld end
Common Characteristics: Design EH valves are connections according to ASME B16.11 that are
single-port, high-pressure, globe-style valves with compatible with ASME B16.34
metal seats, cage guiding, and push-down-to-close
valve plug action. Design EHA valves are angle ver- Maximum Inlet Pressures and Temperatures(2,3)
sions of Design EH valves
Design EHD/EHAD: Uses a balanced valve plug(1) Consistent with applicable Class 900, 1500, or 2500
with graphite valve plug piston rings; also, see pressure/temperature ratings (for Design EH valves)
tables 3 and 4 or Class 900 or 1500 (for Design EHA valves) ac-
Design EHS/EHAS: Uses an unbalanced valve cording to ASME B16.34 unless limited by individual
plug. For low-flow applications, smaller valve sizes temperature limits shown in the Material Tempera-
are available with specialized valve plug designs. ture Capabilities specification(7) or in figures 22 and
See tables 3(1) and 4 23.
Design EHT/EHAT: Uses a balanced valve plug(1) In addition, both steel EH and EHA valves with
with a pressure-assisted PTFE valve plug seal ring; BWE connections have increased pressure/temper-
also, see tables 3 and 4 ature ratings as shown in tables 7 and 8.
34
Bulletin 51.2:EH
Specifications (continued)
Construction Materials 11), or other parts
(tables 13 and 14)
All Except 20-Inch Valve
Body and Bonnet: J WCC steel, J LCC steel, Flow Characteristic
J WC9 chrome-moly steel, or J CF8M (316 SST or Standard Cage: J Equal percentage, J modified
316H SST for service above 538_C [1000_F]) equal percentage(4), or J linear
Trim: Trim materials are listed in table 11 and 12. Standard Cage with Micro-Form Valve Plug:
Special materials for trim and valve body are avail- J Equal percentage or J modified equal percent-
able. Please consult your Fisher Controls sales age(4)
office Standard Cage with Micro-Flute Valve Plug:
Other Parts: See tables 13 and 14 J Equal percentage or J modified equal percent-
Yoke Temperature Limit (8- to 20-inch Valves): age(4)
Standard bonnet with cast iron yoke is limited to Standard Cage with Micro-Flat Valve Plug (De-
538_C (1000_F) sign EHAS only): J Linear
Cavitrol III or Whisper Trim III Cage: J Linear
20-Inch Valve Special cages: Special characterized flow charac-
Valve Body and Bonnet: SA 217 Grade WC9 steel teristic cages are available. Please consult your lo-
Cage: Cast M152 (Wiscalloy M152 SST) cal Fisher Controls sales office.
Valve Plug: CF8M (316 stainless steel) with alloy 6
seat and guide Flow Direction
Seat Ring: CF8M with CoCr-A (alloy 6) seat or Standard Cage
N06600 (Inconel 600) with CoCr-A seat J Design EHD: Normal flow down(8)
Seat Ring Bolting: N07718 (Inconel 718) J Design EHS: Normal flow up(5)
Valve Stem: J SA 286 Grade 660 Condition 2 J Design EHT: Normal flow down(8)
stainless steel or J other materials upon request J Design EHAD: Normal flow down
Piston Rings: Graphite J Design EHAS: Normal flow up
Cage and Seat Ring Gaskets: Silver-plated Monel J Design EHAT: Normal flow down
Body/Bonnet Bolting: Steel Cavitrol III Cage: Flow down
Packing Rings: Carbon/graphite composition,
graphite, and zinc Whisper Trim III cage: Flow up
Packing Box Bushing: Graphite Flow Direction
Packing Box Flange, Studs, and Nuts: S31600 (316
stainless steel) (other materials are available on For All Except 20-Inch Valves:J Flow up through
request) seat ring and out cage openings (for cages with
Springs: J G61500 (6150 steel), J S17700 (17-7 standard cage windows or drilled Whisper Trim
stainless steel) or J N07718 (Inconel) holes) or J flow down through cage openings and
out seat ring (only for cages with drilled Cavitrol
holes)
For 20-Inch Valves: J Flow up through seat ring
Material Temperature Capabilities(3) and out cage openings (for cages with standard
cage windows or drilled Whisper Trim holes) or
Designs EHD/EHAD and EHS/EHAS: Up to 593_C J flow down through cage openings and out seat
(1100_F) unless limited by selection of standard ring (only for cages with drilled Cavitrol holes)
trim materials (table 11 and 12 and figures 22, 23,
24, and 25), Cavitrol III and Whisper Trim III trim Noise Levels
materials (table 11), or other parts (table 13) See table 2 and Fisher Controls Catalog 12, section
Design EHT/EHAT: Up to 232_C (450_F) unless 3 for noise predictions methods
limited by selection of standard trim materials
(tables 11 and 12 and figures 22, 23, 24, and 25), 20-Inch Valve Maximum Flow Coefficient
Cavitrol III and Whisper Trim III trim materials (table Approximately 92,000 Cg or 2600 Cv
-Continued-
35
Bulletin 51.2:EH
Specifications (continued)
Port Diameters ENVIRO-SEALR and HIGH-SEAL Packing Systems
See tables 16 and 17 for Sliding-Stem Valves
Cavitrol, ENVIRO-SEAL, HIGH-SEAL, Whisper Trim, Micro-Flute, Micro-Flat, Micro-Form, Fisher, and Fisher-Rosemount are marks owned by Fisher Controls International, Inc. or
Fisher-Rosemount Systems, Inc. C-seal is a mark owned by Pressure Science, Inc. All other marks are the property of their respective owners.
This product may be covered by one or more of the following patents: 5,129,625; 5,131,666; 5,056,757; 5,230,498; and 5,299,812 or under pending patents.
EFisher Controls International, Inc. 1982, 2000; All Rights Reserved
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express
or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
36
Printed in U.S.A.