Professional Documents
Culture Documents
37615B SPM-D2-10 TechManual 35
37615B SPM-D2-10 TechManual 35
Push Buttons
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
Configuration may be performed by manually inputting the desired set points utilizing the pushbuttons and the LC
display. In order to facilitate configuring the parameters, the push buttons have been enabled with an
AUTOROLL function. This permits the user to advance to the next setting, configuration screen, digit, and/or
cursor position more rapidly by pressing and holding the corresponding pushbutton.
Automatic mode: Display - By pressing this button, the user may navigate
through the displayed measured parameters and alarm messag-
es.
Configuration: Select - Advances the LC display to the next configuration
screen. If any values in a configuration screen have been modi-
fied with the "Digit" or "Cursor", then the "Select" button
must be pressed to save the new setting. By pressing this push-
button again, the user causes the system to display the next
configuration screen.
13 Digit Digit