Professional Documents
Culture Documents
Tube Probe Selection Guide
Tube Probe Selection Guide
3
MultiScan MS5800 tube inspection: internal probes
The information contained in this guide was revised closely in order to match the latest "Probe and accessories" catalog.
We invite you to download this catalog at this address: http://www.olympus-ims.com/en/rd-tech-tube-inspection/
This guide is best viewed with screen resolution of 1024 X 768. However, adjust the zoom for a quick screen fit.
We invite you to browse each page of this guide to help you select ECT, RFT, NFT, MFL and IRIS probes. The pages can be selected
by clicking on the different tabs at the bottom of your screen. Following is a short presentation of each page:
ECT, RFT, NFT & MFL: This page will recommend the best suitable electromagnetic technology probe based on your tube
dimensions and material. It invites you to select among a wide range of probe models to satisfy your needs.
MULTIPLE ENTRY: Use this form to generate multiple ECT, RFT, NFT or MFL probe list from a list of tubes.
ECT F90: This is a frequency calculation tool for calculating the optimal frequency (called "F90") based on material properties
such as resistivity, conductivity, and magnetic permeability.
IRIS: This page will recommend the right probe components to perform an IRIS inspection. However, an IRIS system is not
complete without accessories like a pump, filter unit, cables, etc. See catalog for more information.
Tools: This page will help you to find tube dimensions and convert units.
Anytime, please feel free to contact us for help about your application. We hope you enjoy this guide!
http://www.olympus-ims.com
Version 2.3 - Released July 31st, 2009
Selection tool for ECT, RFT, NFT & MFL probes
MultiScan MS5800 tube inspection: internal probes
OD (Outside Diameter)
Diameter (prefer ID if
1 Enter tube dimensions actual value is known) 25.400 mm
2 Pick tube material Carbon steel - A178, A179, A192, A210, A214
(Used to calculate probe center frequency. If you can't find the material from the list, please check out the "ECT F90" page)
4 Select cable type and length Please select type… Please select length…
(attached models only)
1 Enter TUBE parameters 2 Select PROBE 3 Read or copy automatic probe INFORMATION
data
OD / Wall
No. Units Value Material Model Cable Probe Part Number
ID Thickness
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Page 3 / 13
Multiple entry for ECT, RFT, NFT & MFL pro
MultiScan MS5800 tube inspection: internal p
1 Enter TUBE parameters 2 Select PROBE 3 Read or copy automatic probe INFORMATION
data
OD / Wall
No. Units Value Material Model Cable Probe Part Number
ID Thickness
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Page 4 / 13
Multiple entry for ECT, RFT, NFT & MFL pro
MultiScan MS5800 tube inspection: internal p
1 Enter TUBE parameters 2 Select PROBE 3 Read or copy automatic probe INFORMATION
data
OD / Wall
No. Units Value Material Model Cable Probe Part Number
ID Thickness
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
Page 5 / 13
Multiple entry for ECT, RFT, NFT & MFL pro
MultiScan MS5800 tube inspection: internal p
1 Enter TUBE parameters 2 Select PROBE 3 Read or copy automatic probe INFORMATION
data
OD / Wall
No. Units Value Material Model Cable Probe Part Number
ID Thickness
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Page 6 / 13
Multiple entry for ECT, RFT, NFT & MFL probes
MultiScan MS5800 tube inspection: internal probes
(please refer to the "Probe and Accessories catalog" for more information about probes).
Page 7 / 13
Multiple entry for ECT, RFT, NFT & MFL probes
MultiScan MS5800 tube inspection: internal probes
(please refer to the "Probe and Accessories catalog" for more information about probes).
Page 8 / 13
Multiple entry for ECT, RFT, NFT & MFL probes
MultiScan MS5800 tube inspection: internal probes
(please refer to the "Probe and Accessories catalog" for more information about probes).
Page 9 / 13
Multiple entry for ECT, RFT, NFT & MFL probes
MultiScan MS5800 tube inspection: internal probes
(please refer to the "Probe and Accessories catalog" for more information about probes).
Page 10 / 13
ECT frequency calculation tool
MultiScan MS5800 tube inspection: internal probes
OD (Outside Diameter)
Diameter (prefer ID if
1 Enter tube dimensions actual value is known) 25.400 mm
✘ Transducer (TUB) TUB-254-15M 15 MHz, 25.4 mm (1.0") focal length IRIS immersion transducer
✘ Centering device (TUC) TUC-SM Small IRIS centering device, 18.0 mm to 25.4 mm (0.71” to 1.00”)
NOTE - Complete kit would include BNC cable, water pump and filter. Check out the Tube Probe Catalog
for more information.
BWG (Birmingham Wire Gage) tube thickness chart Inches vs. mm converter