Professional Documents
Culture Documents
Model "L" Sliding Sleeve and Model "L" Sliding Sleeve For Severe Service
Model "L" Sliding Sleeve and Model "L" Sliding Sleeve For Severe Service
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document
is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to
know consistent with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in
conjunction with equipment or product. © 6/26/02 Baker Hughes Incorporated.
Unit No. 3258 6-26-02 “L” Sliding Sleeve And “L” Sliding
Rev. New Page 2 of 6 Sleeve For Severe Service
• Collet Lock on Closing Sleeve - Provides a
WARNING uniform shifting force requirement. Immune to
Use of Baker equipment contrary to solids
manufacturer’s specification may result in
property damage, serious injury or fatality. • Closing Sleeve Skirt - Provides insurance
against being blown up the hole during an
opening operation. This is accomplished by
Shifting Tools placing the flow path above the engaging
members of any shifting tool
1. Standard Shifting Tools - May be used to shift
most sizes of Model “L” Sliding Sleeves. (See
• Seal Bores - Contoured and polished to pass
Chevron Packing without damage
Shifting Tool Chart on Page 6.)
• Integral Locking Groove
2. Model “D-2” Shifting Tool, Product Family No. • Recourse - If, for some reason, the Closing
H81072 specifically designed for the Model “L” Sleeve cannot be closed, the ports can still be
Sliding Sleeve to provide safe, selective, and blanked off with an appropriate Accessory
controlled shifting; locates, shifts, and indicates • Versatility - Depending upon the bore size used
any number of a series of “L” Sleeves (same and the tubing size, the “L” Sliding Sleeve will
size) in a tubing string in any order without dis- function in Top No-Go and/or Selective
turbing the others. In conjunction with the “L” systems. In the closed position it can be
considered and used as a Non-Ported Seating
Sleeve, the “D-2” Shifting Tool is designed to Nipple. In the open position it can be
open the Closing Sleeve without seal damage considered and used as a Ported Seating
or being blown up the hole, even under extreme Nipple
differential pressure from the annulus. • Severe - Service Chevron Packing-Standard
on all Accessories
Features/Benefits • Material Selection - Equipped with Upper and
Lower Subs of alloy steel (as Product Family
• Closing Sleeve Seals - Upper seals are No. H81004), or of stainless steel (as Product
designed to accommodate elastomer swell, to Family No. H81005). Both materials are heat-
prevent pressure trapping, and to require only a treated based on National Association of
moderate and consistent shifting force Corrosion Engineers Specifications. (Hardness
• Lower seals have all the above features, and in is 22 Rc Max). The Housings, coated to prevent
addition are integrally mold-bonded to the corrosion, provide a smooth surface for the
Closing Sleeve. This, plus their dynamically Closing Sleeve Seals
determined shape, permits the “L” Sliding
Sleeve to be opened against severe differential
from either the casing or tubing side without
seal damage
“L” Sliding Sleeve And “L” Sliding Unit No. 3258 6-26-02
Sleeve For Severe Service Rev. New Page 3 of 6
Specification Guide •
Model “L” Sliding Sleeve Shifting Tools Garrett Availability Chart♦
Otis Type “B”
Closing Model
Size Max ∆ OD With Selective Size Model Selective Top No-Go
Sleeve ID “D-2” Size
Keys** Size
1.18 1.18 - - x x
2-3/16" 1.281 B6
1.25 1.25 1-1/4"* x -
1.43 1.43 - 1-1/4" x x
2-3/8" 1.531 B6
1.50 1.50 1-1/2" x -
1.56 1.56 x x
2-1/2" 1.656 1-1/2" - -
1.62 1.62 x -
1.78 1.78 x x
2" ♦
1.81 2.910 1.937 1.81 2" B3 x x
1.87 1.87 2" x x
2.25 2.25 - x x
3-27/64 2.375 2-1/2" B6
2.31 2.31 2-1/2" x x
2.75 2.75 3" *** x x
4-1/2" 2.875 3" B6
2.81 2.81 3" x x
3.68 3.68 x x
5-1/2" 3.910 4"
3.81 3.81 x x
4.31 6.062 4.697 4.31 - -
4.56 6.062 4.697 4.56 - - -
5.50 7.385 5.875 5.50
• Refer to Seal Bore Selector and Specification Guide charts shown in unit l for complete tubing details.
∆ Maximum OD shown is for Sleeve with Top and Bottom Subs with threads as indicated in Parts List on Page 3. If other
threads are ordered, having a coupling with a larger OD than that shown, then the maximum OD would be greater.
∆ Maximum OD shown is for Sleeve with Top and Bottom Subs with threads as indicated in Parts List on Page 3. If other
threads are ordered, having a coupling with a larger OD than that shown, then the maximum OD would be greater.
* Shifter and Dogs must be turned down to 1.234 diameter.
♦ For this size, Slim Hole Selective Keys must be used.
*** For this size, Tool and Keys must be turned down to 2.718 diameter.
Rev. New
Unit No. 3258
H01-95761-10 H01-95762-10 H01-96261-10 H01-96262-10 H01-95743-10 H01-95745-10 H01-90688-10 H01-95689-10
Stainless Steel - 1
1.660 EU 10 Rd 1.660 EU 10 Rd 1.900 EU 10 Rd 1.900 EU 10 Rd 2.062 10 Rd 2.062 10 Rd 2-3/8" EU 8 Rd 2-3/8" EU 8 Rd
2 O-ring 2 2 HWW-B131-H40 HWW-B134-H40 HWW-B136-H40 HWW-B141-H40
Housing - Closing
- 1 1 H01-70028-00 H01-70029-00 H01-70030-00 H01-70031-00
Sleeve Subassembly*
3 Housing 1 1 H01-95767-00 H01-96074-00 H01-95663-00 H01-95686-00
4 Seal 2 2 H01-70003-00 H01-70004-00 H01-70005-00 H01-70066-00
5 Closing Sleeve 1 1 H01-70009-00 H01-70010-00 H01-70011-00 H01-70012-00
Page 5 of 6
Lower Sub♦ H01-95770-10 H01-95771-10 H01-95725-10 H01-95720-10 H01-95667-10 H01-95666-10 H01-90687-10 H01-95687-10
1 -
6-26-02
Alloy Steel 1.660 EU 10 Rd 1.660 EU 10 Rd 1.900 EU 10 Rd 1.900 EU 10 Rd 2.062 10 Rd 2.062 10 Rd 2-3/8 EU 8Rd 2-3/8 EU 8Rd
6
H01-95763-10 H01-95764-10 H01-95727-10 H01-95723-10 H01-95744-10 H01-95746-10 H01-90689-10 H01-95691-10
Stainless Steel - 1
1.660 EU 10 Rd 1.660 EU 10 Rd 1.900 EU 10 Rd 1.900 EU 10 Rd 2.062 10 Rd 2.062 10 Rd 2-3/8 EU 8 Rd 2-3/8 EU 8 Rd
Rev. New
Unit No. 3258
Parts List, Sizes 1.87 - 5.50
Refer to Drawing No. 188-285.
No. Req’d Size and Material No.
Item Product Product
Description Family Family
No. 1.87 2.25 2.31 2.75 2.81 3.68 3.81 4.31 4.56 5.50
No. No.
H81004 H81005
Page 6 of 6
H02-03339-02 H01-98505-10 H02-19346-00 H02-31038-00
Upper Sub ♦ H01-95685-10 H01-95588-10 H01-95589-10 H01-95785-10 H01-95787-10 H02-24106-00
1 - 4-1/2 Armco 4-1/2 Armco 5-1/2 Long 6-5/8 Long
Alloy Steel 2-3/8 EU 8 Rd 2-7/8 EU 8 Rd 2-7/8 EU 8 Rd 3-1/2 EU 8 Rd 3-1/2 EU 8 Rd 5-1/2 Vam
6-26-02
1 Seal Lock Seal Lock Casing 8 Rd Casing 8 Rd
H01-95690-10 H01-95680-10 H01-95682-10 H01-95779-10 H01-95781-10
Stainless Steel - 1 - - -
2-3/8 EU 8 Rd 2-7/8 EU 8 Rd 2-7/8 EU 8 Rd 3-1/2 EU 8 Rd 3-1/2 EU 8 Rd
2 O-ring 2 2 HWW-B141-H40 HWW-B149-H40 HWW-B237-H40 ** HWW-B352-H40 HWW-B259-H40
Housing -
Closing Sleeve
- 1 1 H01-70031-00 H01-70032-00 H01-70033-00 - H02-22808-00 H02-31041-00
Sub-
Assembly*
3 Housing 1 1 H01-95686-00 H01-95590-00 H01-95784-00 H01-98504-00 H02-19348-00 H02-31040-00
4 Seal 2 2 H01-70006-00 H01-70007-00 H01-95488-00 H01-98463-00 - H02-12324-00
5 Closing Sleeve 1 1 H01-70012-00 H01-70013-00 H01-70014-00 H01-98436-00 H02-19350-00 H02-31043-00
Severe Service