Professional Documents
Culture Documents
NeuraLabel 300X RS UserManual 080515 Web
NeuraLabel 300X RS UserManual 080515 Web
Roll-to-Roll System
User Manual
NeuraLabel
Printing Solutions
A Neuralog Company
Applications
The NeuraLabel 300X-RS Roll-to-Roll System has been designed to handle continuous or pre die-cut rolls of label
media with NeuraLabel 300X printer. The system is used to manage rolls of media up to 216mm wide (8.5”),
while having an outside diameter up to 300mm (11.81”) with a 76mm (3”) fixed internal diameter core.
Power Supply
An external power supply 100/240VAC - 2.5A at 24V allows an electronic circuit to provide, through the
tension arm, the adjustment of the rotation speed. A 2A fuse is used as protection.
1
Installation
Label Unwinder
Step 1
Cut the plastic ties.
Step 2
Remove the 7 screws on the unwinder’s side of the
printer plate.
A B
Step 3
With all 7 screws removed, slide the guides of the
unwinder (A) onto the printer plate (B) and use the
same 7 screws from Step 2 to attach the unwinder
to the printer plate by screwing the guides onto the
printer plate (C).
C 2
The sliding guides are properly fixed onto the
printer plate.
Step 4
Plug in the power cord to the unwinder.
Step 5
Reposition the unwinder closer to the printer plate
by sliding them closer to one another.
Label Rewinder
Step 1
Remove the 3 knobs located on the lower part of
the rewinder.
3
Step 2
Match the holes to the printer plate to the holes
on the rewinder.
Step 3
Use the same 3 knobs from Step1 to attach the
printer plate to the rewinder.
Step 4
Plug in the power cord to the rewinder.
4
How to Secure the NeuraLabel 300X Printer onto the Plate
ATTENTION:
Place the NeuraLabel 300X printer onto the
printer plate and make sure to position the
iron feet of the printer plate into the printer’s
guide holes.
Media Path
5
Alignment
6
NeuraLabel
Printing Solutions
A Neuralog Company
4800 Sugar Grove Blvd., Suite 200 | Houston, TX 77477 This Product is Certified:
Phone: 281-240-2525 | Fax: 281-240-2526
Website: www.neuralabel.com