Professional Documents
Culture Documents
56
www.hilti.com.au
Company: Page: 1
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Yara - Longitudinal bracing basin Date: 13/02/2020
Fastening Point:
Specifier's comments:
1 Input data
Anchor type and size: HIT-RE 500 V3 + HIT-V-R M20
Return period (service life in years): 50
Item number: 387151 HIT-V-R M20x480 (insert) / 2123403 HIT-RE
500 V3 (mortar)
Hilti Filling Set or any suitable annular gap filling solution
Effective embedment depth: hef,opti = 398.0 mm (hef,limit = 400.0 mm)
Material: A4
Approval No.: ETA 16/0143
Issued I Valid: 14/05/2019 | -
Proof: SOFA design method + fib (07/2011) - after ETAG BOND testing
Stand-off installation: eb = 0.0 mm (no stand-off); t = 15.0 mm
Baseplate :
R lx x ly x t = 300.0 mm x 330.0 mm x 15.0 mm; (Recommended plate thickness: not calculated)
Profile: no profile
Base material: 2
uncracked concrete, 32MPa, fc,cyl = 32.00 N/mm ; h = 1,000.0 mm, Temp. short/long: 0/0 °C
Installation: hammer drilled hole, Installation condition: Dry
Reinforcement: No reinforcement or Reinforcement spacing >= 150 mm (any Ø) or >= 100 mm (Ø <= 10 mm)
no longitudinal edge reinforcement
R
- The anchor calculation is based on a rigid baseplate assumption.
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
1
Hilti PROFIS Engineering 3.0.56
www.hilti.com.au
Company: Page: 2
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Yara - Longitudinal bracing basin Date: 13/02/2020
Fastening Point:
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
2
Hilti PROFIS Engineering 3.0.56
www.hilti.com.au
Company: Page: 3
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Yara - Longitudinal bracing basin Date: 13/02/2020
Fastening Point:
3 Warnings
• Please consider all details and hints/warnings given in the detailed report!
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
3
Hilti PROFIS Engineering 3.0.56
www.hilti.com.au
Company: Page: 4
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Yara - Longitudinal bracing basin Date: 13/02/2020
Fastening Point:
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan